Your cart is empty.
Keep shoppingClassic Control Course | Design Electrical Control Systems
867 students
Classic Control Course | Design Electrical Control Systems
Master Classical Control Systems Design from Scratch with Real Industrial Projects.
Created byAhmed Sobhy
Last updated 4/2026
Arabic
What you'll learn
- Design Electrical and Control Panels.
- You will learn everything about control components (Relay, Contactor, SSR, Latch Relay, Interlock .... etc)
- You will learn everything about protection devices (MCB, MCCB, ELCB, RCCB, Fuse, phase sequence, GV2, GV3, overload, ...etc)
- Different between ELCB and RCCB.
- You'll learn different way to satrt AC 3-phase motors (DOL- Star/Delta - Soft starter - VFD) all of them in details
- Design the wiring of control circuits and how to terminate the wires in panels.
- How to select every device for your projects in the right way.
- Design full real projects from zero to hero.
- Learn how to control and operate 3-phase motors.
- you'll learn how to read the data on the nameplate of the motor and export important data that you will need for.
- How to calculate the actual value of starting current of induction motors.
- How to calculate the rated current of induction motor if doesn't exist on nameplate.
- you'll understand the difference between soft-start and VFD, and when you prefer one of them on the other.
- you'll learn about different types of timers and how to use & wire timers in your control circuits.
- Understand digital sensors in detail and apply real projects for each sensor.
- Design star-delta circuit and forward-reverse circuit from A to Z.
- How to use and select sensors in control panels.
- Different types of digital Sensors (Limit switch, Proximity sensors " Inductive and Capacitive" ,Level sensors, Flow Sensors, Photoelectric Proximity sensors)
- Different between PNP and NPN and how to make them wiring in control panels.
- How to Convert PNP into NPN and Reverse.
- Discuss star-delta in details.
- There is a practical videos for real applications.
- Design Full machine from A to Z (final project).
Explore related topics
Course content
12 sections • 59 lectures • 13h 6m total length
Requirements
- No experience needed.
- Commitment in Assignments.
- Passion and determination to learn be at its highest level.
Description
Hello, my friends in our course you will learn All steps to Make a Full Electrical Control Design for any Project, in our course we will discuss all the Basic components and Protection Devices in detail after that we'll make a Full Electrical Control Design for about 20 applications.
The course content is divided into 3-levels.
After studying for each level you have to pass the exam to be sure that you understand the previous section.
Level_1 || Electricity
- Electrical Basics.
- Introduction about the control system.
- Types of loads.
Level_1 || Control components in details
- Types of switches.
- Relay.
- Latch Relay.
- Contactor.
- Mechanical interlock.
- Solid State Relay.
- Solid state relay (SSR).
Level_1 || Projects on 1st level
- How to design and create your first control system.
- Applications for beginners (تطبيقات عمليه بالفيديو) .
- Level 1 Exam
Level_2 || Learn about 3-phase motors
- Different ways to start the motor.
- DOL, soft starter, Ac drive (inverter), star-delta.
- Motor Nameplate data.
- How to calculate rated current for the motor.
- How to calculate starting current.
- Reverse Direction of IM.
Level_2 || Projects on 2nd level
- Projects to apply on level 2 (تطبيقات عمليه بالفيديو).
- Level 2 Exam.
Level_3 || Protection Devices in details
- What is the reason for electrical faults.
- Protection Devices.
- Circuit Breaker.
- RCCB and ELCB
- Fuse.
- GV2 & GV3.
- Overload.
- Over-under voltage.
- Phase sequence.
- Total protection.
Level_3 || Timers & star-delta starting & Digital sensors
- Timers.
- Star Delta starting.
- Star Delta timer.
- Digital sensors.
Level_3 || Projects on 3rd level & final project.
- Applications about timers and sensors (تطبيقات عمليه بالفيديو)
- Final Exam.
Who this course is for:
- Anyone who wants to learn and practice Classic control and different Automation controlling systems & designs from scratch to the advanced level
- Automation systems designers
- Electrical ,Controlling ,Electronics engineers
- electrical technicians and Students of Engineering
- Industrial , production, maintenance engineers