Cisco IP Services TSHOOT Labs For CCNA, CCNP, and CCIE

Name: Cisco IP Services TSHOOT Labs For CCNA, CCNP, and CCIE
Rating: 5.0 (4 reviews)

Learn how to troubleshoot the following IP services: DHCP, NAT, NTP, and HSRP

Created byBassam Alkaff • Remote Author @ INE • CCDP, CCNPx3, VCP

Last updated 2/2025

English

English [Auto],

What you'll learn

Part of the full Course (The best seller course in its category): Cisco Troubleshooting Labs For CCNA, CCNP, and CCIE Students.
Troubleshoot IP Services issues on Cisco devices using Systematic approaches and commands.
Troubleshoot DHCP
Troubleshoot NTP
Troubleshoot NAT
Troubleshoot HSRP
Troubleshooting Summary Document and Devices Initial Configurations Included.
Practice test for the student to check what he/she has learned

Course content

3 sections • 11 lectures • 49m total length

Course Introduction & Overview2:47
Meet the instructor and learn a systematic approach to troubleshooting IP surfaces on Cisco devices, covering DHCP, NAT, NTP, and HSRP through hands-on labs and a practice test.

IP Services Lab 1 Topology, Tickets and Initial configuration0:01
IP Services Lab 1 Topology and Tickets3:37
Explore the ip services lab topology with four routers, nat on router two, and dhcp from router three. Verify router two is active in 192.168.15.0/24 and test connectivity to 192.168.30.0/24.
IP Services Lab 1 - Part 14:19
Copy the md5 authentication configuration from router two to router one to fix the hsrp authentication mismatch on ethernet 0/0 and enable preemption with router two's higher priority.
IP Services Lab 1 - Part 213:42
Resolve the nctb clock synchronization on router two by diagnosing MTV status and association details, fixing dhcp/switch issues, and ensuring proper route advertisement to reach router four.
IP Services Lab 1 - Part 34:01
Identify and fix a NAT misconfiguration on router two that blocks connectivity from router one to router four; correct inside/outside interfaces, verify with NAT translations, then restore connectivity.

IP Services Lab 2 Topology, Tickets and Initial configuration0:01
IP Services Lab 2 Topology and Tickets0:39
Explore IP services lab 2 topology in the Cisco troubleshooting labs, using the same base configuration and tickets as lab 1, with the DHCP server moved to router four.
IP Services Lab 2 - Part 14:34
Resolve a duplicate address in two groups by deleting group two on router two, configuring group one to 192.168.12.254, and enabling preemption to make router two the active HSV router.
IP Services Lab 2 - Part 211:56
Troubleshoot MTV time synchronization by correcting the DHCP helper address and interface IPs, enabling reachability between router two and router four, and matching the authentication key.
IP Services Lab 2 - Part 33:53
Troubleshoot connectivity between router one and router four by tracing the path, verifying routing and nat, and correcting the nat access-list to permit 192.168.12.0 with wildcard mask of class C.

Requirements

Basic Understanding of IP Services concepts and configuration on Cisco routers.
Access to real Cisco devices or emulation tools to practice the labs is recommended.

Description

*** Part of the full Course: Cisco Troubleshooting Labs For CCNA, CCNP, and CCIE Students (The best seller course in the CCIE Enterprise category Category ) ***

Troubleshooting is an essential and important skill for network engineers. As a network engineer, you have to know not just how to configure network devices, but also how to troubleshoot them. And for troubleshooting to be efficient, it has to be systematic and logical and not by random trial and error attempts.

In this course, I will demonstrate troubleshooting of IP Services on Cisco Devices. You can use this course to learn how to troubleshoot Cisco Routers in real production and to help you to prepare for the CCNP TSHOOT exam and the Troubleshooting section of the CCIE lab exam. If you are already have CCNA level knowledge and/or experience, or you are in the middle of your CCNA studies, then you can use this course as a start for learning advanced troubleshooting.

In this course you will learn how to troubleshoot the following IP services:

DHCP (Dynamic Host Configuration Protocol)
NAT (Network Address Translation)
NTP (Network Time Protocol)
HSRP (Hot Standby Router Protocol )

This course uses multiple explaining ways in addition to videos. At the beginning of the course there is an article for summarized troubleshooting steps that is available for download as a PDF and which I recommend to be read before watching the videos. And for each lab, initial configuration will be available for download in order for students to practice the labs and challenge themselves if they can solve the tickets before watching the videos or even after. In addition, there will be a practice test for the student to check what he has learned. Some tickets have multiple possible solutions. Therefore, restrictions have been set so that there should be only one valid solution.

Let us start the course together and begin the troubleshooting journey. Happy troubleshooting !

Who this course is for:

Cisco professionals and students who want to learn Troubleshooting of IP Services

Cisco IP Services TSHOOT Labs For CCNA, CCNP, and CCIE

What you'll learn

Explore related topics

Course content

Introduction1 lecture • 3min

IP Services Lab 15 lectures • 26min

IP Services Lab 25 lectures • 21min

Requirements

Description

Who this course is for: