Udemy
    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
Subscribe
Turn what you know into an opportunity and reach millions around the world.
Learn More
Your cart is empty.
Keep shopping
Chemical, Oil & Gas: A Beginner’s Guide to P&ID Development
Rating: 4.3 out of 5(229 ratings)
1,404 students

Chemical, Oil & Gas: A Beginner’s Guide to P&ID Development

Read, Review, Develop Oil and Gas, Chemical, Petrochemical P&ID including operability, safety, maintainability aspects
Created byProcess Engineering Hacks
Last updated 1/2024
English

What you'll learn

  • Various aspects that go into the P&ID creation
  • How to interpret a P&ID?
  • How to prepare a P&ID?
  • How to read a P&ID?
  • What are the different principles to be applied in a P&ID? How to identify them?
  • Examples of identifying the safety, operability and reliability components in a P&ID
  • Who are the different stakeholders for the Project P&ID’s?
  • What is hierarchy of rules while preparing a P&ID?
  • What are different types of P&ID? Explained with real example
  • Difference between PFD and P&ID brought out through real example
  • What is a a legend P&ID? and the different types.
  • Know about piping, instrumentation and other symbology
  • Rules of P&ID Development- Piping, layout, instrumentation
  • 12 Steps of P&ID Development explained and demonstrated with an application example
  • Valves: Purpose, Uses, Types, Type selection for different service, isolation philosophy
  • Liquid sampling system types and template
  • Pipes: Symbology, line numbers, specification break, piping interface
  • Process control: purpose, process variables, heat exchanger temperature control, feedback vs feedforward control, control loop components
  • P&ID Template: Vertical Vessel
  • P&ID Template: Horizontal Vessel
  • P&ID Template: Heat Exchanger
  • P&ID Template: Vertical Vessel
  • P&ID Template: Vertical Reboiler
  • P&ID Template: Centrifugal Compressor
  • P&ID Template: Centrifugal Pump
  • P&ID Template: Centrifugal Pump Minimum Flow alternatives
  • Relief valve template
  • Process Control System - Purpose, Example, Safety Considerations
  • Analysis of control requirements
  • How material balance is controlled through process control
  • Process control: General Rules
  • Process control template for fuel gas knockout drum
  • Process control template for centrifugal compressor
  • Process control template for centrifugal pump
  • Identify Distillation column controls
  • Different types of distillation column feed controls discussed and presented
  • Different types of reflux and product controls for distillation column discussed
  • Different types of pressure control for distillation column presented

Course content

16 sections • 213 lectures • 10h 42m total length

  • What is covered in this section0:18

    Course keyword

    p&id; piping; instrumentation; control; legend; instrument; gate valve; ball valve; globe valve; relief valve; PFD; process flow diagram; chemical engineer; utilities; gas sweetening; distillation column; vessel; exchanger; design pressure; design temperature; check valve; body bonnet; flow; process design; isolation; pump; centrifugal pump; recycle; stakeholders; operation; safety; cost; flexibility; special piping; piping material specification; PMS;   

  • Introduction7:25

    What are P&ID's? When is P&ID prepared? and Who are the users of P&ID?

    These questions are  answered in this  video.

  • Introduction to a Real Offsite Storage Tank P&ID1:39

    course keywords
    p&id; piping; instrumentation; control; legend; instrument; gate valve; ball valve; globe valve; relief valve; PFD; process flow diagram; chemical engineer; utilities; gas sweetening; distillation column; vessel; exchanger; design pressure; design temperature; check valve; body bonnet; flow; process design; isolation; pump; centrifugal pump; recycle; stakeholders; operation; safety; cost; flexibility; special piping; piping material specification; PMS;

  • Demonstration of P&ID utilization though a Real P&ID6:14

    course keyword
    p&id; piping; instrumentation; control; legend; instrument; gate valve; ball valve; globe valve; relief valve; PFD; process flow diagram; chemical engineer; utilities; gas sweetening; distillation column; vessel; exchanger; design pressure; design temperature; check valve; body bonnet; flow; process design; isolation; pump; centrifugal pump; recycle; stakeholders; operation; safety; cost; flexibility; special piping; piping material specification; PMS;

Requirements

  • Some exposure to a process plant through study, work etc.
  • Those who handle or are exposed to P&ID
  • How material balance is maintained by a control system
  • General rules for process control system
  • Process control template for fuel gas knockout drum

Description

This course aims to provide the students the skill to prepare, interpret and read P&ID's. The course starts with a comprehensive introduction to the Piping and Instrumentation Drawing (P&ID) is delivered. As a second step the principles that drive the P&ID development is described with real P&ID examples. The course is replete with examples of real industrial setting P&ID's.

After going through the principles of P&ID, the steps for P&ID development is introduced These steps are easy and simple ones that can be interchangeably applied. Next the legend P&ID is described in detail. With this you can easily read the P&ID. However, to develop a reviewer’s awareness some detailed inputs on valve, Pipes, control systems and equipment templates is provided.

At the end of this course, you will not be an expert but you will know enough to start the journey of reading, understanding, interpreting P&ID’s and begin developing simple P&ID’s.

Always remember a well developed P&ID is NOT a single person’s effort, but is the culmination of efforts of several engineering specialists, vendors, operators. After many different revisions and reviews the P&ID’s are good for Construction.

So, Good Luck and Hope you enjoy the journey!

Course Contents

  • Introduction

  • Principles of P&ID Development

  • P&ID Types

  • Legend P&ID

  • General Rules of P&ID Development

  • Steps in P&ID Development

  • Valves

  • Pipes

  • Control System

  • Equipment Templates

  • Process Control & templates

  • Instrument Templates (August 2023)

  • Process Control System (July 2023)

  • P&ID Implementation Milestones (August 2023)

  • Distillation. Control (September 2023)

  • Bonus


Who this course is for:

  • Aspiring and current quality, piping, instrument, mechanical designers and engineers
  • Aspiring and current operating plant operators, maintenance technicians, safety staff, engineers
  • Those who aspire to or currently participate in HAZOP studies, risk studies
  • Those who are associated with building a process plant
  • Those who will be involved in preparing, executing shutdown work in a process plant

Report abuse