Certified SOLIDWORKS Professional CSWP Sample Exam Solution

Explore the official SolidWorks CSWP sample exam and exam guide, including segment one on part creation and modifications, segment two on configurations and design tables, and segment three on assemblies.

Read the exam questions and set the unit system to millimeter, gram, second with two decimals; define global variables and equations, choose alloy steel, then sketch and extrude the base.

Master creating two extruded boss features in SolidWorks CSWP by sketching on the top plane, applying tangent arcs, using convert entities, trimming, and setting smart, linked, and offset dimensions.

Create the cut feature from the drawings by offsetting a sketch by nine mm, adding six ten‑mm fillets, and offsetting the extruded cut by five mm from the bottom face.

Create a through hole with a counterbore using the hole wizard in SolidWorks, setting diameter 15, counterbore diameter 30, depth 10, and positioning with a point tool.

Model two centered cylinders in SolidWorks with diameters x and y, depths dd, and a 10 mm base offset using global variables dx and dd for the extrusions.

Perform two through cuts with an extruded cut through all, define a global variable set to 41, apply an angled chamfer, and verify mass properties in a CSWP sample exam.

Update parameters in SolidWorks equations: A=225, B=210, C=176, D=137, E=39; X and Y unchanged. Rebuild to confirm the part's mass.

Modify a SolidWorks part for the CSWP official sample exam question 4 by updating equations, suppressing features, editing sketches, adjusting chamfers and fillets, and verifying mass properties.

Update the parameters in SolidWorks equations by setting A=229, B=217, C=163, D=119, and E=34, then rebuild to verify the mass properties of the part and confirm the answer.

Master essential and advanced SolidWorks features for the CSWP exam, practice with 50+ sample questions across all three segments, and enjoy a free 30-minute 1-on-1 coaching session.