CCNA R&S 200-301 Complete Training

Name: CCNA R&S 200-301 Complete Training
Rating: 4.9 (88 reviews)

Exam Preparation with Labs included.

Highest Rated

Created byHadis Khan

Last updated 8/2025

Urdu

What you'll learn

People will able to Design & Manage Networks.
Switching & Routing Protocols of Cisco or Open standard devices can be controlled.
IPv4 & IPv6 Concepts would be better.
Small to Medium Size Organizational Network can be handle easily after completing CCNA.
End of the training you will eligible to attempt CCNA 200-125 (Online Exam)

Course content

7 sections • 114 lectures • 17h 14m total length

What is CCNA? (Theory)11:35
Installation of Packet Tracer "DOWNLOAD ALL RESOURCES (PPT SLIDES + LABS)9:43
You can download all Resources used in this CCNA Course.
1) All Power Point Presentations covering (Switching, Routing, IP Addressing & Security)
2) Cisco Packet Tracer 7.0 (Used in this training series)
3) Cisco ASPIRE Game Simulation to get hands-on practice

If you would have any question do reach your instructor by sending private message.
CCNA: What is Gateway of Mini-Routers?9:50
CCNA: Dynamic & Static IP Concepts.9:43
CCNA: Normal Wireless Configuration (SSID & WPA2)9:38
Mini-Routers Admin Panel Password & Normal Network9:44
Mini-Router WAN Port7:41
Ping Command5:03

What is User, Privilege & Admin Mode? (Practically Proved)9:28
Setting Console Password8:59
Configuring Privilege Security4:09
Switching Module: MAC Address Table8:41
What is Virtual Local Area Network? (Theory)7:32
VLANs : Switchports Access & Trunk (Theory)7:25
VLANs: Designing Virtual LANs (Practical)6:08
VLANs : SwitchPort Memberships (Practical)6:20
VLANs Trunk Port Configuration (Practical)11:06
What's Telnet? & Configuring Telnet (Practical)24:39
What's SSH (Secure Shell)? & Configuring SSH (Practical)11:55
Switching Loops & Redundancy (Theory)15:19
Preventing Switching loops by (STP)15:32
Spanning-Tree Protocol (STP) Explaining7:31
Rapid Spanning-Tree Protocol (RSTP)7:26
STP Election : Forcefully Reducing Priority Number6:50
PVSTP Per Vlan STP (Theory & Practical)8:20
Port Security Configuration14:24
What's EtherChannel (Theory)6:20
EtherChannel PAGP & LACP (Practical)13:36
RAM vs NVRAM, Flash & Version CCNA9:11
Single & Multiple VLANs Deleting (Practical)3:33
DHCP Service on Switch, Server & Router13:54
HTTP Configuring in Packet Tracer6:36
DNS Configuring in Packet Tracer6:49

What is IPv4? (Internet Protocol) "Concepts of IPs"16:14
Classes of IPs (Class A, B, C, D & E)8:32
Reserved IPs Loopback, Network & Broadcast5:56
Private vs Public IP : IANA6:06
World Internet connectivity Undersea via Fiber Cables. (Theory)9:44
Why Subnetting Important? FLSM vs VLSM4:32
FLSM C-Class 50 Hosts9:26
FLSM C-Class 30 Hosts4:32
Subnetting Differentiate Networks (Practice)4:55
FLSM B Class9:53
FLSM Class A (Finishing FLSM)7:03
VLSM C-Class11:13
VLSM C-Class {Shortcut}4:21
VLSM B-Class Finishing IP Addressing6:24

ROUTER? & Models?8:32
Static Routing Configuration19:20
Dynamic Routing5:24
Distance, Link State & Hybrid Routing Protocols4:30
RIPv2 (Theory)8:08
RIPv2 Configuration8:56
What is Administrative Number? (Theory)3:48
ASN, IGP and BGP? (Theory)9:23
What is EIGRP "Enhanced Interior Gateway Routing Protocol"?10:48
EIGRP Configuration8:20
What is OSPF ? (Theory) "Open Shortest Path First"12:04
OSPF Areas Concept (Theory)9:56
OSPF : Single-Area Configuration (Practical)10:24
OSPF : MultiArea Configuration (Practical)9:52
What is WildCard Mask? (Theory)8:20
This Video will help you to understand the value of WildCard Mask, which can be used in OSPF Dynamic Routing or with Access Lists Labs for giving permissions to specific hosts.
What's Inter-Vlan Routing Legacy and Sticky? (Theory)9:28
Inter-Vlan Legacy (Configuration)7:27
Inter-Vlan Sticky (Configuration)9:01
Inter-Vlan and Routing on MultiLayer Switch? (Theory)4:29
Inter-Vlan & Routing on MLS (Configuration)19:12
Access Lists and Types of ACLs (Theory)9:37
In this video we descriptive talked about Standard, Extended, Named & even Numbered ACLs with their concepts to implement for best.
Standard Access List "ACL" Lab (Configuration)13:05
Standard ACL will help to permit or Deny the Traffic through Layer 3 device based on Source IP Filtering. Attached the Complete Configuration Lab Video.
Extended Access List "ACL" Lab (Configuration)22:29
Extended ACL widely far good as compare to Standard, Extended has ultimate functionalities to Filter the traffic based on Source, Destination IP & with specific port numbers as well.
Standard Named Access List "ACL" Lab (Configuration)12:31
Named ACL is policy in which we can assign a specific name & can implement on Routers port with that specific name, Why it's better to use rather than Named ACL, the one of the major advantage of having Named ACLs are EDITING. we could easily edit particular polices between the ACLs.
Inter-Vlan Routing & Dedicated DHCP Server (Configuration)20:38
The Self-Test Video for you!
The Inter-Vlan Routing & the ACLs methods are been discussed so far as basics, Now time to solve or design the production area Topology which contains following devices:
1 Dedicated DHCP Server
2 Computers in HR Department
2 Computers in Sales Department
1 Router or Layer 3 Device
Below are the topics what we are going to configure:
Trunking / Vlans (Configuration)
DHCP Scopes (Configuration)
Inter-Vlan Routing for each VLANs
IP-Address-Helper commands (In order to identify the DHCP Server)
and the Final Moving on to next Video for ACLs.
ACL Configuration for Inter-Vlan Routing9:35
MultiLayer Switch Configuration for Inter-Vlan, Dedicated DCHP & ACLs.10:36
DHCP & InterVlan Routing with ACL on Layer 3 Switch (Configuration)4:00
What is Network Address Translation (NAT) ?11:53
Static NAT (Configuration)18:01
Dynamic NAT (Configuration)8:58
Port Address Translation (Configuration)6:00
What is IPv6 (Theory)9:46
IPv6 Types (Theory)8:23
Basic IPv6 Assigning Lab Configuration4:46
WAN Technology : Leased Line vs Frame Relay16:46
WAN Technology : MPLS & Metro Ethernet Lines14:29
First Hop Redundancy Protocol "HSRP | VRRP | GLBP"6:21
HSRP Configuration "The Last Video" (Bonus Videos added in next section)12:57
The Last part of this course with Configuration HSRP, HSRP provides the redundancy in order to maintain high availability in complex networks. End of the Video we've talked about Cisco Exam Videos which will be provided you separately via Email. There are certain issues while promoting the course therefore making it simple to protect the data on individual based.

Send me your Email address to my by using Message, to provide you the link of Cisco Exam Preparation Videos.

Installation GNS3 Adding L3 Image6:39
Download all required resources in one file containing :
1) Anaconda3-2020.02-Windows-x86_64
2) c3725-adventerprisek9-mz124-15
3) GNS3 connectivity to Real PC (PPT Slide)
4) GNS3-2.1.12-all-in-one-regular
5) python-2.7.15.amd64
6) vIOS-L2
7) vIOS-L2.vmdk

Any question please free to drop question in private message in Udemy Messages.
Thank you,
Hadis Khan
Adding L2 Images in GNS3 (Lab)8:48
GNS3 Connection to localhost (Lab)6:40
Python Installation Adding Path in Windows 10 or Windows 11 (Lab)6:07
Python Variables4:53
Python : Int, Str, Slicing (Lab)5:48
Python List, Dict and Tuple (Lab)7:34
Opening & writing scripts in Python (Lab)11:02
Erasing & Writing in Cisco Configuration Using Python (Lab)10:20
Python : For and While Loop (Lab)7:11
Telnet & Basic Configuration using Python (Lab)12:10
OSPF & Loopback config using Python (Lab)2:14
VLAN Loop using Python (Lab)8:36
VLAN on Multiple Devices using Python (Lab)8:50

Requirements

Basic Knowledge of Windows
Knowledge of Basic Software Installation

Description

The CCNA R&S (Cisco Certified Network Associate in Routing & Switching) Theories with Practical’s videos now composed in Urdu language including Exam preparation of 200-301. Get Enrol now to become "Cisco Certified" Internationally & move ahead in Networking technology.

An Instructor provides you Information Technology (I.T) field course which is on Networking based training, will help you to learn & practice at your own home. The effort is to make simple & straight forward lectures which are most necessary for the basic concepts of Networking & Cisco edge.

COURSE OUTLINES: CCNA R&S 200 -301

Network Fundamentals
Switching Technologies (VLAN, Trunking, STP, PVSTP, RSTP, Etherchannel & Port Security)
IP Addressing (Basic Subnetting, VLSM & FLSM)
IP Routing (IP Routing, Inter VLAN Routing, EIGRP & OSPF)
Security (NAT/PAT & ACLs)
WAN (Technologies, Protocols & Frame Relay)
High Availability (HSRP, VRPR, SNMP & Syslog)
IPv6
Automation and Python Scripting

If you are seeking entry-level jobs in the IT industry or hope to fulfill prerequisites to pursue jobs with specialized IT skills - this is perfect for you. Potential career pathways include network technician, support engineer, network administrator, network designer, network engineer, and more.

Upon completing this course, you'll be fully prepared to pass your certification exam on the first attempt. Additionally, you can contact your instructor directly to inquire about a 58% scholarship opportunity, generously provided by Cisco NetAcad Academy. This scholarship aims to support students in achieving their certification goals with reduced financial burden.

Who this course is for:

People who wants to initiate their carrier in Networking.
Ideal Course for Networking Students
Who wants to achieve Cisco Certification Successfully.

CCNA R&S 200-301 Complete Training

What you'll learn

Explore related topics

Course content

Introduction of Basic Networking8 lectures • 1hr 13min

What is Open System Interconnection? (Theory)11 lectures • 55min

CCNA: Switching Module (Theories & Practicals)25 lectures • 4hr 2min

CCNA Switching REAL LABS Practicals on physically devices.3 lectures • 41min

IP Addressing, Subnetting & General Overview of Global Networks14 lectures • 1hr 49min

Routing Module with RIPv2, EIGRP & OSPF (Theory & Practical Labs)39 lectures • 6hr 48min

Bonus Lectures Networking Automation with Python (Labs)14 lectures • 1hr 47min

Requirements

Description

Who this course is for: