CCIE - MPLS Design and Configuration

Name: CCIE - MPLS Design and Configuration
Rating: 4.3 (40 reviews)

MPLS Core Network Design

Created byHabib Zakaria

Last updated 8/2019

English

What you'll learn

MPLS DESIGN AND CONFIGURATION IN DETAIL
FACTS ABOUT MPLS
MPLS SHIM HEADER DETAILS
MPLS DESIGN REQUIREMENTS
MPLS LABEL INFORMATION AND OPERATION
MPLS COMMANDS
PRACTICAL LAB 1 - BUILDING MPLS CORE NETWORK
PRACTICAL LAB 2 - REDISTRIBUTION OF CUSTOMER STATIC ROUTES TO MPLS
PRACTICAL LAB 3 - REDISTRIBUTION OF EIGRP STATIC ROUTES TO MPLS
PRACTICAL LAB 4 - REDISTRIBUTION OF OSPF STATIC ROUTES TO MPLS
PRACTICAL LAB 5 - BGP ROUTE CONVERGENCE TO MPLS

Course content

1 section • 15 lectures • 2h 35m total length

Introduction1:16
This is the Introduction of the course.
Important facts about MPLS5:21
In this video the author will cover why MPLS is needed and facts about MPLS.
MPLS SHIM HEADER2:19
In this video the author will cover the details of MPLS Header, its label value size, length, exp and TTL.
MPLS Design Requirements7:06
In this lecture the author will will cover the requirements of the design, the router will discuss how to enable CEF in routers, IGP routing , LSR routers and LSP in detail.
MPLS Label Information2:31
In this short lecture the author will share how LSRs discover neighbors , the author will show the range of reserved labels.
MPLS Label Operations2:59
In this lecture the author will explain the steps that the MPLS takes for the packet to reach its destination. The label goes through POP, PUSH and SWAP operation along the LSP path.
MPLS Commands2:30
In this lecture the author will share important commands needed to run MPLS on the routers.
Important Terminologies before building MPLS Core Network.6:56
In this lecture the author will introduce VRFs , Route Distinguisher , Route Target and MP-BGP
LAB 1 - Building MPLS Core Network1:03:16
In this lab the author will build a MPLS core topology and will configure it step by step, the author will enable the LSR routers.
LAB 2 - Redistribute Static Routes from CE router to the PE Routers and Test16:57
In this lab the author will redistribute static routes from the customer CE routers to PE routers. The author will test the connectivity in the end. This will done step by step with explanation.
Lab 3 -A- Redistribute EIGRP routes from CE to PE routers and Test.1:24
In this lab the author will redistribute EIGRP routes from the customer CE routers to PE routers. The will test the connectivity in the end. This will be done step by step with explanation.
Lab 3 - Redistribute EIGRP routes from CE to PE routers and Test.10:05
In this lab the author will redistribute EIGRP routes from the customer CE routers to PE routers. The will test the connectivity in the end. This will be done step by step with explanation.
LAB 4 - A-Redistribute OSPF routes from CE to PE routers and Test.13:50
In this lab the author will show step by step configuration and will redistribute OSPF routes from the customer router to the PE routers and test connectivity.
LAB 4 - B -Redistribute OSPF routes from CE to PE routers and Test.1:52
In this lab the author will show step by step configuration and will redistribute OSPF routes from the customer router to the PE routers and test connectivity.
LAB 5 - Establish BGP route convergence for the customer.17:17
In this lab the author will show the steps needs to established BGP connectivity for the customer. This is the last lab and I hope you have gained knowledge and now are familiar with MPLS network. Thank you for your time and see you in our other courses.

Requirements

CCNA
OSI MODEL
ROUTING
VIRL OR GNS 3 SIMULATOR
KNOWLEGE OF REDISTRIBUTION OF ROUTES

Description

This is an advance course and the author will cover the MPLS network design and configuration. For the benefit of the viewer the author will provide step by step configuration and explanation of the whole process. The author will also cover the concepts and theory involved with MPLS and he will also demonstrate 5 most important labs that can be used in real world situation. The topics that will be explained in details are below

1. Facts about MPLS.

2. MPLS Shim Header details.

3. MPLS Design Requirements.

4. MPLS Label Information.

5. MPLS Label Operation.

6. MPLS commands.

7. Lab 1: Building of MPLS Core Network.

8. Lab 2: Redistribution of Static Routes to MPLS.

9. Lab 3: Redistribution of EIGRP Routes to MPLS.

10. Lab 4: Redistribution of OSPF Routes to MPLS.

11. Lab 5. Establish Convergence using BGP routing.

Who this course is for:

Network Administrators
Network Analysts
Network Engineers
CCNA
CCNP
CCIE
System Analyst