CATIA V5 for Beginners: CAD Design for Mechanical Engineers

Master rectangular shape tools in CATIA V5 part design, including oriented rectangle, parallelogram, elongated holes, cylindrical elongated holes, keyhole profile, hexagon, and centered shapes.

Explore the circle tool in catia v5, including three point circle, circle from coordinates, tangent circles to three lines, and three point arcs with and without limits.

Master spline and connect tools to form smooth curves, and explore ellipse, parabola by focus, hyperbola by focus, and conic sections in CATIA V5 and its operation toolbox.

Explore the operation toolbox in CATIA V5, mastering corner, fillet, trim, break, quick trim, and chamfer, then mirror, symmetry, translate, rotate, scale, and offset for efficient 2D design.

Master line and axis tools in CATIA V5 for beginners, including infinite line, tangent and bi-tangent lines, bisecting lines, line normal to curve, and axis operations like mirror for assemblies.

Explore the sketch tools in Catia v5, including grid, snap to point, construction lines, and geometrical and dimensional constraints, and learn to access commands in the sketcher interface.

Learn to use pad and pocket commands in catia v5 to add or remove material from a solid, with sketches, constraints, and dimensions.

Learn to create cylindrical parts by rotating a 2D sketch around an axis with the shaft command, and sweep a profile along a guide curve with the rib command.

Explore slot and groove commands in CATIA v5 for beginners, including setting up sketches, creating a center curve profile, and applying slot and circular groove operations on cylinders.

Learn to use transformation features toolbox in catia v5 for mechanical design, applying translation, rotation, symmetric, access to access, and mirror commands to create and position geometry.

Learn to apply circular and rectangular patterns, complete crown and user patterns, and use scale and affinity to control size and direction in CATIA V5.

Practice 2d drawings in CATIA V5, learning constraints, circles, axis and center points, creating a plate with holes, arcs, pattern, bitangent lines, and quick trim.

Practice drawing a part by creating three circles (26, 44, 60), using the middle as reference, placing six 10 mm holes with rotation, and applying axes, constraints, arcs, and tangents.

Learn to draw a housing in CATIA V5 by constructing concentric circles, applying constraints, patterning holes with rotate, and using bi-tangent lines, corner, and trims.

Sketch a top plate for a press tool assembly: 150 by 250 rectangle with four 40-diameter holes, pad 30, add a 50-diameter circle at 50 from bottom, save as catpart.

Design a guide pillar in CATIA V5 by sketching a 25 mm circle, extruding to 200 mm, chamfering ends 2 mm at 45 degrees, and saving as a cat part.

In CATIA V5, this tutorial designs a guide bush by sketching two circles (25 and 40 mm), pad to 60 mm, apply 2 mm 45-degree chamfers, and save for assembly.

Create a bottom plate in CATIA V5 by sketching a 150x250 rectangle, adding 25 mm holes at 30 mm spacing, mirroring, adding a 50 mm hole, and extruding 30 mm.

Learn to assemble a complete press tool in CATIA V5 by importing parts, fixing components, applying coincidence and offset constraints, patterning guide pillars and bushes, and creating an exploded view.