Catia V5 : Fundamental 3D Modeling Course for Engineers

Learn to draw lines in Catia v5 by sketching on planes, using line commands, constraints, and coordinate-based definitions to create horizontal, vertical, and angled lines.

Explore how to draw various rectangles in Catia V5 sketch mode, including basic, three-point, parallelogram, and center rectangles, using first and second points, dimensions, and constraints for precise, symmetric sketches.

Learn to draw circles in sketch modeling using Catia V5 by defining the center and radius, or diameter, and exploring circle types such as three-point, tangent, and coordinate-based circles.

Explore arc drawing in Catia V5 sketch modeling by learning three types of arcs—three-point arcs, center-and-radius arcs, and arcs with limits—using coordinates, points, and constraints.

Master spline creation by drawing and editing planes with control points, adding or removing points, closing or connecting planes, and adjusting tendency and radius.

Learn how to create and use bisected lines in Catia V5, drawing reference lines, creating parallel and tangent lines to circles, and constructing normal (90-degree) lines on curves.

Learn to create infinite lines in Catia V5, including horizontal, vertical, and lines through two points, placing them at chosen coordinates as reference geometry.

Apply chamfer tools in Catia V5 to replace a corner with two adjacent lines, define chamfer dimensions by angle and length or hypotenuse, and explore trim options for multiple elements.

Demonstrate using the corner tool in Catia v5 to connect two adjacent lines with an arc, set the radius, and explore corner and tangent arc options with trim behaviors.

Learn to use the offset tool in sketch mode to alter geometry in Catia V5. Explore no propagation, tangent propagation, point propagation, and both-side offset with distance and instances.

Utilize translate, rotate, and scale tools in the sketching panel to move and resize geometry with a base point and coordinate values. Learn about instances, duplicate mode, and internal/external constraints.

Trim lines in Catia V5 using the trim tool with respect to another sketch, choosing trim all element or trim first element, and extend or reduce to the intersection.

Learn to trim and break sketches in Catia V5 using quick trim and break tools, trimming inside circle portions and handling coincidences, plus deleting geometry with keyboard shortcuts.

Discover how to create mirrored geometry in Catia V5 using the middle and symmetry tools, select a reference axis, and duplicate elements by symmetry or mirroring.

Explore smart pick in catia v5 sketching to automatically reference endpoints, create parallel and perpendicular lines, and apply tangent and midpoint constraints for precise 3d modeling.

Learn how to apply dimensional tolerances in Catia V5 by defining unilateral and bilateral limits, setting upper and lower bounds, and editing multi-constraint dimensions in sketches.

Master geometric and dimensional constraints in Catia V5, including manual and auto constraints, with examples of parallelism, perpendicularity, coincidence, concentricity, tangent, symmetry, and equidistance to control sketch geometry.

Unlock geometric constraints in Catia V5 by applying automatic and manual constraints to sketches, including horizontal, vertical, fixed length, radius, concentric, tangent, parallel, perpendicular, and coincident relationships.

Learn to apply the symmetry constraint in Catia V5 to create vertical and horizontal axis symmetry using three references and verify equal distances with dimensions.

Learn how automatic constraints in Catia V5 auto-apply horizontal, vertical, tangent, parallel, and other relations to sketches, speeding design without manual constraints.

Learn to apply dimensional constraints in Catia V5 sketches by inserting and managing dimensions. Distinguish weak versus strong and reference dimensions, and use horizontal, vertical, angular, radius or diameter measurements.

Learn to automatically insert dimensions in Catia V5 sketches by using the auto constraint tool, selecting reference elements, and applying automatic dimensioning to rectangles, circles, midpoints, and trimmed features.

Use Catia V5 to create a 200 by 200 sketch with a 10 radius, add 20 diameter cutouts, place centers, and apply constraints and trimming to finalize the sketch.

Perform a Catia V5 sketch by drawing rectangles and circles, applying dimensions and constraints to position centers and radii, then trimming and mirroring features.

Master pad creation in Catia v5 by selecting circle profiles on planes and applying up to next, up to last, up to plane options with profile selection and preview.

Explore pad creation in Catia v5 by sketching circular profiles in isometric view, extruding in two directions with middle extend, adjusting limits and thickness, and applying the take feature.

Create pads in Catia V5 by sketching perpendicular to the XY plane and extruding to height, then develop surface pads using a profile and a reference line, with normal alignment.

Learn to avoid pad defects in Catia v5 by building closed profiles, removing overlaps and intersections, and using quick trim to ensure clean, single-sketch profiles.

Learn how to create a pocket in Catia V5 by sketching a base rectangle and circle, using the pocket command to remove material downward with preview and OK steps.

In Catia v5, create a shaft by sketching a profile, selecting an axis of rotation, and applying adjustable angles up to 360 degrees with features like tick and neutral axis.

Master the Catia V5 group command to remove material using a constructed profile drawn on multiple planes, projected references, and an axis of rotation to create a groove.

Learn to create a filled pad in Catia V5 and apply draft with first and second limits, set a 5-degree draft angle, and adjust radius options for precise geometry.

Practice creating a Catia v5 3d model by building a base rectangle, adding pads, pocketing material, and applying dimensions, constraints, and projections from top and front views.

Use Catia V5 pocket to remove material for a two-hole cutout of 10 mm diameter, positioned by centerlines and constraints; sketch the profile with rectangles, circles, and radius 8.

Access the fillet options from the far-left menu and apply a radius between two faces. Preview the result after adjusting the radius values with plane references.

Learn to apply chamfer tools in Catia V5 by defining mode, length, height, and angle, previewing results, and refining edges from front and isometric views.

Explore how to create holes in Catia v5 geometry, detailing blind holes, tapered holes, countable holes, and counter drilled holes, with parameter control and precise positioning.

Learn to create and adjust hole features in Catia V5, including blind, tapered, flat bottom, and threaded holes, with control over depth, diameter, angle, and bottom profile.

Apply constant or variable draft in Catia v5 by selecting faces, using a reference face, and employing limiting and binding elements to control draft across surfaces.

Explore creating a rib by sweeping a rectangular profile along a guide path with Catia V5's live feature, adjusting angle, direction, and reference faces for precise geometry.

Learn how to insert stiffness into CATIA V5 models by creating sketch profiles, projecting reference edges, and defining thickness and directional controls.

Create complex blends with the multi section solid tool by selecting multiple sketches and guides, previewing results, adjusting coupling and deviation, and managing guides for a systematic arrangement.

Master multi section solids in Catia V5 by creating a rectangle and a circle, configuring coupling with ratio and guides, and refining the model with construction lines and precise endpoints.

Learn how to create 3d points in Catia V5, using coordinates, distances along directions, ratios on curves, points on surfaces and planes, and tangent or between-point methods.

Learn to create datum planes in Catia V5 using offset planes, planes through points, lines, and surfaces, and planes defined by reference or equation.

Learn boolean operations in Catia V5, focusing on intersect to obtain the common material between two bodies, and explore union, trim, and remove options.

Continue with boolean operations in Catia V5 and learn to add multiple bodies. Select bodies to merge into a single geometry and create a complete body with the add option.

Use the subtract boolean operation in catia v5 to remove material from a body by selecting the two bodies and applying the remove to create a hole.

Perform a union trim in Catia V5 by opening the file, selecting two bodies, and using phase to remove and phase to keep to remove the unwanted face.