DIY - Build your own Shipping Container Home in 2020 course
What you'll learn
- Avoid the 10 common mistake most people do when building with shipping containers
- Apply the 10 thing every shipping container home must include
- Student would need to know the transportation cost of a Container to the building site
- Depending on Where the student will erect there shipping container home, they might need a Generator to power the powertools needed for the project
Up to Date as at: January 2020.
Shipping Container Homes in 2020, why or why not?
Do's and Don'ts When Building a Shipping Container Home.
Learn the things to avoid and the things you must do when building your own shipping container home. You will save a lot of sleepless nights, time and money by just planning your building process better.
You can save more than $500 on your building project by applying the information covered in this course.
Why should you look into this course?
Over the last 10 years, an idea evolved to use stockpiled shipping containers as modular units for building office space as well as domestic homes. Because these empty hefty steel boxes are piling up in ports around the world and posing a storage problem. Since 2005 several architects and builders are taking advantage of this surplus to recycle the containers.
Looking at a container has 2 metric tons of steel which will take 8000 kwh of energy to melt down and make new beams. The process of modifying that entire 2 metric tons of steel into a higher and better use domestic home only takes 400 kwh of electrical energy (or 5%). This takes a bit more muscle and planning but we feel is that next step up for better Re-cycling.
Each long container measures 2.4 m wide by 12 m long by 2.5 m tall. Depending on the quality of a used shipping container, it could set you back anything from $2,000 - $10,000 per container.
According to structural engineers, these units are stronger than conventional house framing because of their resistance to "lateral loads" -- those seen in hurricanes and earthquakes -- and because steel is basically welded to steel. The roof is strong enough to support the extra weight of a green roof - which has vegetation growing on it - if the owner should want it.
As for their energy efficiency, they claim that when the appropriate coatings are installed, the envelope reflects about 95 percent of outside radiation, resists the loss of interior heat, provides an excellent air infiltration barrier and does not allow water to migrate in.
When applying a standard exterior siding to a house, the finished house is virtually indistinguishable from conventional housing.
Who this course is for:
- Any body that want to build with shipping containers
- Any body that consider building low a cost house for themselfs or others
I am an Internet entrepreneur for the last 23 years. Left my full-time corporate job by the end of June 1997 to work for my self.
I am a Certified Light Steel Frame Erector and Building Contractor focusing on alternative building methods since 2007.
Things I do and enjoy
Create Shipping Container homes where it is possible to deliver them and as alternative Light Steel Frame structures where it is not possible to bring containers to the clients' site.
Create video training courses.
Develop sport-related membership sites.
and lastly, enjoy PHP programming and web systems.
My part-time focus is on Embroidery Software Training video publication plus some Self Improvement, YouTube Video Marketing and Web Development
Outside of work, I am a published author on Amazon Kindle and Createspace.
I enjoy my bush trips at least twice per year to clear my head.
My passion is sharing what I know with others and helping them to succeed as well.
I started earning a monthly income on Udemy in December of 2014
I am also co-hosting some Bernina Software training course with my partner and wife Jacqui Viljoen at School of Digitizing where we both are instructors on the Bernina Software Series ver 5 - 8 and Embird Embroidery Software
© P Viljoen Trading, -All Rights Reserved
I started my own company on 7 January 2005 and joined up with my partners and parents Philip and Jacqui Viljoen. I have been an entrepreneur for the last 10 years. My main focus is on 3D Rendering, Search Engine Optimisation (SEO), Youtube Video Marketing and the Embroidery Industry training service and support.
From My CV:
- I have been training software in the embroidery and digitizing industry since 2007, with more than 14, 60 minute and longer video available.
- I have been part of developed and renovations in real estate property .
- I enjoy my bush trips at least twice per year to clear my head.
- I am also co-hosting some course with my partners Philip and Jacqui Viljoen who is the instructor on the Bernina Software Series
Course you will see in 2015
Embird Embroidery Software, Learn how to create .......
A series of Embird Embroidery Digitizing courses
© JR Viljoen Trading, -All Rights Reserved