Revit MEP! for Plumbing Systems
What you'll learn
- Acquire a Revit student license
- Set up a project in Revit
- Create, manipulate and modify hydrosanitary systems
- and much more!
Requirements
- Basic knowledge of Revit is recommended, but not necessary.
- Basic knowledge of Sanitary Installations is recommended, although not necessary.
Description
Welcome to this Sanitary Facilities course with Revit MEP.
Advantage:
You will dominate from the interface to the creation of plans.
You will learn with the most common, a real 4-level residential project.
I will guide you step by step, I will not assume that you know anything about Revit, nor about Sanitaria.
If you regret it or not what you expected, you can ask for your return.
It will continue to develop over time, adding improvements and updates.
NOTE: YouTube content teaches you how to use the program but is disorganized and knows no rules or design criteria. Knowing how to use REVIT MEP is not knowing Hydrosanitary, or any other technical branch such as electrical or structural. I invite you to check it out for yourself.
Here you will learn to use the necessary tools to create hydrosanitary plans for any building project. The content of this course can be classified into different sections, in which each one develops an important stage of the hydrosanitary design:
Description of the content:
Cold and Hot Water with Revit MEP.
First Module of the BIM program with Revit: Sanitary Installations.
Here you will learn to use the necessary tools to start a project in Revit, load sanitary families and create cold and hot water pipe systems. You will also learn to self-dimension these systems with the calculation tools offered by the program.
First Section - Introduction and Devices:
Learn to load an architectural plan and sanitary appliances.
Second Section - Pipe Systems:
Learn to load and connect pipes manually and automatically.
Third Section - Hot Water and Diameters:
Learn to integrate hot water and calculate diameters automatically.
Drainage and Ventilation with Revit MEP.
Second Module of the BIM program with Revit: Sanitary Installations.
Here you will learn to use the necessary tools to create drainage and ventilation systems, including important components such as siphons. In addition, you will have the ability to create replicas of a design to work symmetrical projects and buildings quickly.
First Section - Drains:
Learn to place drains and create drainage systems
Second Section - Siphons:
Learn to edit families and correct interferences between systems.
Third Section - Replicas:
Learn to duplicate designs when working with buildings or symmetrical plants.
Fourth Section - Ventilation:
Learn to create vents to connect them to the drainage system.
Hydrosanitary Components with Revit MEP.
Third Module of the BIM program with Revit: Sanitary Installations.
Here you will learn to load or model pumps, autoclaves, tanks, registers, septic tanks, grease traps and other hydrosanitary components in different ways.
First Section - Supply Components:
Learn to load bombs and tanks. Also learn to model a cistern.
Second Section - Collection Components:
Learn to model records and grease traps in different ways.
Creation of Plans with Revit MEP.
Fourth Module of the BIM program with Revit: Sanitary Installations.
Here you will learn to create labels, calls, sections, tables, details and other elements necessary for the presentation of the hydrosanitary plans of any building project.
First Section - Plans, Labels and Calls:
Learn to label pipes and devices, add technical notes and work with different scales on the same plane.
Second Section - Tables, Sections and Details:
Learn to quantify the elements with tables of quantities and to import important details from different external sources.
NOTE: This course was developed with the 2018 version. 99% of the content remains the same, however check the discussion forums for any major changes.
The course is in English and contains subtitles in the following languages, German, Arabic, Chinese, Korean, Danish, French, Greek, Dutch, Hebrew, Indonesian, Italian, Japanese, Portuguese, Polish, Persian, Russian, Swedish, Thai, Turkish and Vietnamese.
Who this course is for:
- Engineering or Architecture Professionals
- Engineering or Architecture Students
- Plumbing / Plumbing Technicians
- Traders and Parts Manufacturers
Course content
- Preview05:58
- Preview06:27
- 04:38Alignment
- Preview06:03
- Preview06:35
- 04:09Sink
- Preview06:54
Instructors
![AulaGEO Academy](data:image/svg+xml,%3Csvg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 64 64"%3E%3C/svg%3E){kind=avatar}
- 3.9 Instructor Rating
- 937 Reviews
- 11,364 Students
- 82 Courses
We choose the best courses and make them available to new audiences. For this we use our main value proposals:
-Conceptualize
-Re-design
-Display
-Sale
Our training offer covers the entire spectrum of data intelligence:
Capture - Modeling - Design - Construction - Operation. Using technological development and process improvement as a transverse thread.
The creators of courses with which we have decided to work have been carefully selected, to offer a complementary set of knowledge. We firmly believe that today people do not seek courses to fill their walls with diplomas; but to make their abilities more productive.
- 4.4 Instructor Rating
- 1,168 Reviews
- 10,650 Students
- 8 Courses
Sobre mi:
Soy Ingeniero Civil y Profesor. Tengo una maestría en Administración de la Construcción y experiencia en supervisión de proyectos de construcción. Adicionalmente estoy fortaleciendo mis conocimientos en la gestión y el diseño relacionado con el agua en España con el Master MAGUA, de la EOI.
Soy profesor ayudante en la Universidad Autónoma de Santo Domingo, fuí Ingeniero Supervisor en Tavares Industrial, una compañía en el área de la construcción y actualmente soy encargado de la división de hidrología aplicada del departamento de hidrología del Instituto Nacional de Agua Potable y Alcantarillado de mi país. Mi trabajo me ha beneficiado con experiencia que ahora quiero compartir con mis estudiantes.
He trabajado como profesor e ingeniero en muchas posiciones y mi meta es seguir trabajando, aprendiendo y enseñando la Ingeniería Civil.
Experiencia Laboral
Febrero 2016 – Actualidad
Instituto Nacional de Agua Potable y Alcantarillado INAPA - Encargado de División de Hidrología Aplicada del departamento de Hidrología perteneciente a la Dirección de Ingeniería.
Enero 2013 – Febrero 2016
Tavares Industrial S.R.L. Supervisor de Avanzada del Departamento de Concreto bajo el cargo del Gerente de Concreto Ing. Amín Santana.
Enero 2012 – Diciembre 2013
Ayuntamiento Municipal de Villa Bisonó, Santiago. Ingeniero Auxiliar en el Departamento de Urbanismo a cargo de la Alcaldesa Amantina Gómez y el Arq. Roberto Castillo. Participación en varios proyectos de diseño y ejecución en distintas áreas de la Ingeniería.
Noviembre 2011 - Diciembre 2011
FEDOMU - Federación Dominicana de Municipios. Desarrollo de Presupuestos para pequeñas obras en el Ayuntamiento del Cercado, San Juan de la Mangana, a cargo de la Alcaldesa Eunice Segura. Desarrollo de Presupuestos para pequeñas obras en el Ayuntamiento de Polo, Barahona, a cargo del Alcalde Andrés Ruiz.
Abril 2011 – Mayo 2011
Cliente: Ing. Martín Arias. Diseño de estructura vial y alcantarillado pluvial con estudio de riesgo por inundaciones generando curvas de intensidad-duración-frecuencia para camino vecinal El Higüero en las Lagunas, Moca, a solicitud del Síndico José Rafael Bueno.
Experiencia Docente
Marzo 2013 – Actualidad
Profesor Ayudante del Departamento de Ingeniería Civil de la Universidad Autónoma de Santo Domingo, impartiendo docencia en las cátedras de Hidráulica y Sanitaria.
Septiembre 2009 – Septiembre 2011
Monitor del Departamento de Ingeniería Civil de la Universidad Autónoma de Santo Domingo, asistiendo en las horas prácticas de las asignaturas de las cátedras de Hidráulica y Sanitaria.
Educación Superior
Octubre 2017 – Julio 2018
Máster en Ingeniería y Gestión del Agua (MAGUA) en la Escuela de Organización Industrial (EOI) en Madrid, España.
Abril 2012 – Noviembre 2014
Concluido el programa de la maestría “Administración de la Construcción” con la tesis titulada “Análisis comparativo de las distintas configuraciones hidráulicas para el abastecimiento de agua potable en torres” en la Universidad Autónoma de Santo Domingo.
Septiembre 2006 – Agosto 2011
Graduado con el título de Ingeniero Civil con la tesis titulada “Diseño del Alcantarillado Pluvial de la Urbanización El Paso, Villa Mella” en la Universidad Autónoma de Santo Domingo.
- 3.8 Instructor Rating
- 495 Reviews
- 5,649 Students
- 26 Courses
Researcher, writer and rich content creator.
More than 25 years working int thee Geo-engineering industry:
-Infrastructure and civil work projects management
-CAD / GIS / Surveying & Construction training
-Land and Cadastre projects
-Land Administration and development projects
Founder of the Geofumadas website, with more than 1.500 articles about CAD, GIS, Surveying, Cadastre, BIM, Digital Twin and other trend topics. The website is over 170.000 visitors per month and 21.000 followers in twitter.
Founder of the TwinGeo magazine, attending on site conferences in USA, UK, Netherlands, Singapore, India, Spain, Mexico, Colombia, Chile, Guatemala and other countries.
Founder of the AulaGEO Academy, with more than 70 courses focused in geospatial, engineering and operation of land and infrastructure projects.