Revit MEP - detailed course for Plumbing Systems
What you'll learn
- Acquire a Revit student license
- Set up a project in Revit
- Create, manipulate and modify hydrosanitary systems
- and much more!
Requirements
- Basic knowledge of Revit is recommended, but not necessary.
- Basic knowledge of Sanitary Installations is recommended, although not necessary.
Description
Welcome to this Sanitary Facilities course with Revit MEP.
Advantage:
You will dominate from the interface to the creation of plans.
You will learn with the most common, a real 4-level residential project.
I will guide you step by step, I will not assume that you know anything about Revit, nor about Sanitaria.
If you regret it or not what you expected, you can ask for your return.
It will continue to develop over time, adding improvements and updates.
NOTE: YouTube content teaches you how to use the program but is disorganized and knows no rules or design criteria. Knowing how to use REVIT MEP is not knowing Hydrosanitary, or any other technical branch such as electrical or structural. I invite you to check it out for yourself.
Here you will learn to use the necessary tools to create hydrosanitary plans for any building project. The content of this course can be classified into different sections, in which each one develops an important stage of the hydrosanitary design:
Description of the content:
Cold and Hot Water with Revit MEP.
First Module of the BIM program with Revit: Sanitary Installations.
Here you will learn to use the necessary tools to start a project in Revit, load sanitary families and create cold and hot water pipe systems. You will also learn to self-dimension these systems with the calculation tools offered by the program.
First Section - Introduction and Devices:
Learn to load an architectural plan and sanitary appliances.
Second Section - Pipe Systems:
Learn to load and connect pipes manually and automatically.
Third Section - Hot Water and Diameters:
Learn to integrate hot water and calculate diameters automatically.
Drainage and Ventilation with Revit MEP.
Second Module of the BIM program with Revit: Sanitary Installations.
Here you will learn to use the necessary tools to create drainage and ventilation systems, including important components such as siphons. In addition, you will have the ability to create replicas of a design to work symmetrical projects and buildings quickly.
First Section - Drains:
Learn to place drains and create drainage systems
Second Section - Siphons:
Learn to edit families and correct interferences between systems.
Third Section - Replicas:
Learn to duplicate designs when working with buildings or symmetrical plants.
Fourth Section - Ventilation:
Learn to create vents to connect them to the drainage system.
Hydrosanitary Components with Revit MEP.
Third Module of the BIM program with Revit: Sanitary Installations.
Here you will learn to load or model pumps, autoclaves, tanks, registers, septic tanks, grease traps and other hydrosanitary components in different ways.
First Section - Supply Components:
Learn to load bombs and tanks. Also learn to model a cistern.
Second Section - Collection Components:
Learn to model records and grease traps in different ways.
Creation of Plans with Revit MEP.
Fourth Module of the BIM program with Revit: Sanitary Installations.
Here you will learn to create labels, calls, sections, tables, details and other elements necessary for the presentation of the hydrosanitary plans of any building project.
First Section - Plans, Labels and Calls:
Learn to label pipes and devices, add technical notes and work with different scales on the same plane.
Second Section - Tables, Sections and Details:
Learn to quantify the elements with tables of quantities and to import important details from different external sources.
Disclaimer. This course was originally in spanish. We created an english audio version, because it was asked by the students of other languages. The video content is the original from the spanish version but the audio is in english.
The course is in English and contains subtitles in the following languages, German, Arabic, Chinese, Korean, Danish, French, Greek, Dutch, Hebrew, Indonesian, Italian, Japanese, Portuguese, Polish, Persian, Russian, Swedish, Thai, Turkish and Vietnamese.
Who this course is for:
- Engineering or Architecture Professionals
- Engineering or Architecture Students
- Plumbing / Plumbing Technicians
- Traders and Parts Manufacturers
Course content
- Preview05:58
- Preview06:27
- 04:38Alignment
- Preview06:03
- Preview06:35
- 04:09Sink
- Preview06:54
Instructors
![AulaGEO Academy](data:image/svg+xml,%3Csvg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 64 64"%3E%3C/svg%3E){kind=avatar}
- 4.0 Instructor Rating
- 1,156 Reviews
- 12,945 Students
- 96 Courses
We choose the best courses and make them available to new audiences. For this we use our main value proposals:
-Conceptualize
-Re-design
-Display
-Sale
Our training offer covers the entire spectrum of data intelligence:
Art - Capture - Modeling - Design - Construction - Operation. Using technological development and process improvement as a transverse thread.
The creators of courses with which we have decided to work have been carefully selected, to offer a complementary set of knowledge. We firmly believe that today people do not seek courses to fill their walls with diplomas; but to make their abilities more productive.
- 4.4 Instructor Rating
- 1,308 Reviews
- 11,934 Students
- 8 Courses
Objetivos
Soy Ingeniero Civil con pasión por los recursos hidráulicos con experiencia en la supervisión, evaluación y diseño de proyectos hidrológicos, hidráulicos y sanitarios. Actualmente encargado de la división de Hidrología Aplicada en INAPA y me mantengo actualizado impartiendo docencia en temas hidráulicos.
Luego de obtener mi título de grado realicé una Maestría en Administración de la Construcción en la que trabajé en una tesis evaluando los sistemas hidrosanitarios en torres, lo que causó que me diera cuenta de que la ingeniería del agua era mi rumbo a seguir. Gracias a mis calificaciones pude obtener una Beca para realizar el Máster de Ingeniería y Gestión del Agua en Madrid, muy aclamado en Europa. Actualmente estoy dedicando mis esfuerzos a la investigación científica para beneficio del sector de los recursos hídricos, por lo que tengo como meta alcanzar el más alto nivel académico, el doctorado.
He realizado múltiples estudios a nivel profesional desde simples diseños a pequeñas obras hasta evaluaciones complejas de proyectos de presa, todo gracias a oportunidades adquiridas siendo empleado, servidor público y a nivel particular como socio de TESA Consultores y MA Ingenieros.
Experiencia Laboral
Febrero 2016 – Posición actual. Encargado de la División de Hidrología Aplicada en INAPA.
Abril 2012 – Posición actual. Profesor en las cátedras Hidrosanitarias en la UASD.
Enero 2013 – Febrero 2016. Supervisor del Departamento de Concreto en Tavares Industrial.
Enero 2012 – Diciembre 2013. Ingeniero Auxiliar a Urbanismo en el Ayuntamiento del Villa Bisonó.
Diseños y Proyectos
Septiembre 2017. Estudio de Planicie de Inundación para proyecto P456 La Cuaba.
Agosto 2017. Diseño de Instalaciones Sanitarias para Torres Oriolis.
Abril 2017. Diseño de Drenaje Sanitario de la comunidad La Granja, Las Terrenas, Samaná.
Abril 2011. Diseño de las alcantarillas viales de la comunidad del Higüero, Moca.
Estudios Avanzados
Septiembre 2021. Doctorado en Ingeniería de Recursos Hídricos en OSU, Corvallis, Oregon, USA.
Octubre 2017 – Julio 2018. Máster en Ingeniería y Gestión del Agua (MAGUA) en la EOI, España.
Abril 2012 – Noviembre 2014. Máster en Administración de la Construcción en la UASD.
Septiembre 2006 – Agosto 2011. Graduado de Ingeniero Civil en la UASD.
Conocimiento Digital
Vasta experiencia en múltiples aplicaciones relacionadas con la ingeniería civil:
QGIS, Revit MEP, HEC-HMS, HEC-RAS, Chac, Aquatools, SWMM, EPANET, ArcMAP, HEC-ResSim, Civil3D, IHA, ModFlow, MS Project y otros (organizados en función de las horas dedicadas).
Adicionalmente a mi pasión por la ingeniería del agua, he tomado como hobby la enseñanza de los softwares que he aprendido a utilizar durante mi carrera. He desarrollado múltiples cursos en los que los estudiantes pueden aprender CIVIL 3D, QGIS, Excel y Revit MEP para distintos fines.
Idiomas. Español nativo. Dominio avanzado del inglés en lectura, escritura y habla. Francés básico.
- 3.8 Instructor Rating
- 595 Reviews
- 6,225 Students
- 30 Courses
Researcher, writer and rich content creator.
More than 25 years working int thee Geo-engineering industry:
-Infrastructure and civil work projects management
-CAD / GIS / Surveying & Construction training
-Land and Cadastre projects
-Land Administration and development projects
Founder of the Geofumadas website, with more than 1.900 articles about CAD, GIS, Surveying, Cadastre, BIM, Digital Twin and other trend topics. The website is over 170.000 visitors per month and 21.000 followers in twitter.
Founder of the TwinGeo magazine, attending on site conferences in USA, UK, Netherlands, Singapore, India, Spain, Mexico, Colombia, Chile, Guatemala and other countries.
Founder of the AulaGEO Academy, with more than 95 courses focused in geospatial, engineering and operation of land and infrastructure projects.