Beginners Guide to 3D Printing - Bootcamp with Fusion 360

Name: Beginners Guide to 3D Printing - Bootcamp with Fusion 360
Rating: 4.5 (207 reviews)

3D Printing made easy: Learn the fundamentals of 3D printing and how to design models using 3D software Fusion 360

Created byPhilip Cotton

Last updated 5/2024

English

English [Auto],Spanish

What you'll learn

How 3D printers work
How to design models for 3D printing using Fusion 360
How to slice models using CURA
Useful tips and hints for successful 3D printing
Maintenance of 3D printers and troubleshooting

Course content

7 sections • 36 lectures • 3h 55m total length

An introduction to 3D printing15:20
In this lesson, you will be able to review what a 3D printer is, where they are used in society, along with the key components of how they work.
Where to find FREE files to print and how to download and configure CURA16:05
In this lesson, we will explore different websites that offer FREE STL files to print, along with downloading a calibration file. The lesson will also teach you how to download CURA and configure the software to your 3D printer.
How to calibrate your 3D printer and print a test file9:29
Learn how to calibrate home 3D printers—Anycubic Omega S, Creality Ender 3, and Flashforge Adventurer 3—through manual bed leveling with paper, corner screws, auto home, and benchy test prints.
How to load filament5:53
In this lesson you will learn how to load filament into your machine ready for 3D printing.
How to download and install Fusion 3605:19
In this lesson you will learn how to download and install Fusion 360 to your computer.

Introduction to Fusion 360 software2:57
In this lesson, we will review the fusion 360 interface and the key elements of the program.
How to create a sketch and extrude into 3D2:40
In this lesson, you will learn how to create basic sketches and then convert them to 3D using the extrude feature.
How to add fillets to a model1:47
In this lesson, you will learn how to use the fillet feature to curve the edges of a model.
How to use the chamfer feature1:50
How to add holes to a 3D model4:27
In this lesson, you will learn how to use the hole feature and how to add a hole to a 3D object.
How to use the shell feature2:20
Create a hollow cylinder in Fusion 360 by sketching a 75 mm circle, extruding to 90 mm, then using shell to set wall thickness inside or outside.
How to edit a sketch4:28
In this lesson you will learn how to edit a sketch to change the key sizes of a design.
How to create a revolve3:37
In this lesson, you will learn how to use the revolve feature to create a sketched profile and rotate it 360 degrees.
How to edit a revolve3:42
In this lesson, you will learn how edit a revolve once it you have created the revolve.
How to create a sweep1:45
In this lesson you will learn how to use the sweep feature.
How to sweep a paper clip4:00
In this video you will use the sweep feature to create a small model of paper clip. This will help you practice the concept for use later when modelling an iphone case.
How to add a workplane and use the loft feature2:04
In this lesson you will learn how to add a new workplane using the 'offset workplane' feature and then loft a series of sketches together to create a 3D shape.
How to create a screw thread2:46
In this lesson you will learn how to add screw threads to objects.
How to create a nut and bolt2:28
In this lesson, you will learn how to create a nut and bolt using the screw thread feature.

Model a key chain7:50
Learn to model a simple keychain in Fusion 360 by sketching, extruding, filleting edges, adding a through hole, and embossing customizable text before exporting as an STL for 3D printing.
Model an iphone keyring stand7:40
Model a toothpaste squeezer5:37
Model a food clip device6:10
Model a food clip in Fusion 360 by sketching, applying a fillet, and extruding, then mirror and 3d print with optional top text.

Model a candle holder5:28
In this lesson you will learn how to add a workplane and use the left feature to create a 3D model to turn into a candle holder. Please measure the diameter of your tea light first and edit the size of the circle so it's a few mm larger than needed. I have used 38mm in the video, however some tea lights have a different size.
Model a bed levelling nut6:26
Model a fidget spinner9:23
With this file the size of the bearings are 608. Also depending on the printer and material you are printing with you may need to slightly alter the scale when printing to get a tight fit. The bearing should be a push fit, alternatively, you can superglue them to the fidget spinner.

Model a flexible bicycle grip9:21
Learn to model a customized flexible bicycle grip in Fusion 360 using flexible filament, with precise 25.5 mm diameter and 125 mm length, including text on the grip for customization.
Model a storage unit with drawers for 3D printing consumables13:06
Learn to design a 3D printed storage unit with drawers for 3D printing consumables in Fusion 360, including shells, midplane dividers, nozzle holes, and a front pull tab.
Model an iphone case (concept can be used with any smartphone).20:01
Model an iPhone case in Fusion 360 from a calibrated reference image to a finished bumper, using sketching, sweeping, extruding, and back pattern cuts.

CURA basic settings10:47
Explore Cura basic settings to adjust layer height, infill, adhesion, and resolution, and learn to import files, set printer profiles, and orient models for optimal prints.
CURA custom settings6:54
Master cura custom settings to control layer height, wall and top/bottom thickness, infill density and pattern, and print speed and temperature for faster, quality 3d prints from Fusion 360 files.
CURA custom settings tips and hints7:00
CURA pricing prints and further tips7:16

Requirements

No prior experience needed, you just need to be able understand how to download software to use.
It would be beneficial to have access to a 3D printer so you can print the designs from the tutorials.

Description

The Ultimate Guide to 3D Printing: Beginners Bootcamp is the perfect course for hobbyists, students, homeschoolers, and educators who want to learn 3D printing and how to create their own 3D-printed objects.

Whether you're a beginner who's just getting started with 3D printing or you're looking to expand your knowledge and skills, this course has everything you need to succeed.

Led by Philip Cotton, the founder of Learnbylayers, this course is designed to be accessible and engaging for learners of all levels. Philip has years of experience in 3D printing education and has helped thousands of learners around the world to discover 3D printing.

This course is specifically tailored for beginners, but it's also suitable for those with some experience who want to expand their skills. You'll learn everything you need to know to get started with 3D printing, from setting up your printer to designing and slicing your own models.

With expert tuition, you will learn how to get started with 3D printers and learn how to create functional objects that you can print with ease. This course will teach you the skills you need to succeed! By the end of the course, you'll have a solid understanding of the principles of 3D printing and the ability to create your own designs with confidence using Fusion 360.

These are the major highlights of the course

How 3D printers work and where they are used
The theory behind the technology
How to get started e.g. load filament and calibrate the print bed
Where to find free files to print online
How to download Fusion 360 and CURA
How to design your own 3D models to print using Fusion 360
How to slice models using CURA
Best practice with 3D printers and how to fix troubleshooting issues
Included in the course is example STL files to download from each tutorial

If you're ready to take your first steps into the exciting world of 3D printing, sign up for the Ultimate Guide to 3D Printing: Beginners Bootcamp today. With expert tutition and hands-on experience with software such as Fusion 360 and CURA you'll have everything you need to succeed.

Who this course is for:

Beginners who are new to 3D printing.
Anyone who wants to learn 3D design and Fusion 360.
Hobbyists who use 3D printers at home.
Teachers or home schoolers wanting to learn about 3D printing.

Beginners Guide to 3D Printing - Bootcamp with Fusion 360

What you'll learn

Explore related topics

Course content

Introduction to 3D printing5 lectures • 52min

Fusion 360 Basic skills building tasks14 lectures • 41min

Beginner Fusion 360 Design challenges.4 lectures • 27min

Intermediate Design Challenges3 lectures • 21min

Advanced Fusion 360 Design challenges3 lectures • 42min

CURA slicing tutorials4 lectures • 32min

3D printing general info3 lectures • 19min

Requirements

Description

Who this course is for: