Beginners Indian Kurti (kameez ) Making Course

Learn to draft an Indian kurti using standard body measurements, including shoulder, full length, bust, under bust, waist, chest, hip, sleeve, armhole, and neck.

Learn to take accurate kurti measurements, including shoulder, bust length, armhole, back baseline, hip length, and sleeve opening, using proper tape alignment on bone and a relaxed posture.

Learn how to draft a kurti pattern on chart paper, marking shoulder half, neck down, back and front neck, and key body lengths for a tailored fit.

Learn to adjust kurti shoulder length based on neck depth by measuring, marking inches, and moving the shoulder inward in increments from one fourth to one inch.

Learn perfect armhole drafting for beginners kurti by calculating the chest midpoint, marking inside shifts, using a French curve, and adding ease for different fits.

Learn how to take chest, bust, waist, and hip measurements, draft the kurti outline with curved hip lines and neckline, and mark outer cutting lines on craft paper.

Draft sleeves for a beginner indian kurti by marking reference lines, calculating cap height from standard measurements, and aligning front and back sleeves using half-inch marks and midpoints.

Learn to cut a kurti fabric with a double fold, place the draft, mark shoulders, neck, and sides, apply notches and seam allowances, and prepare pieces for stitching.

Master sleeves cutting for a beginner kurti by creating the sleeve pattern, folding fabric, marking a 15-inch sleeve length, measuring sleeve round, and joining right sides before finishing.

Learn to cut and finish a basic kurti neckline using a gum-backed canvas, mark the shoulder point and measurements, align fabric, and stitch the front and back necklines.

Stitch the kurti neckline by folding a half-inch seam allowance, slowly sewing around round corners and V shapes, align the middle point with notches, then top-stitch to secure.

Learn to stitch a kurti from shoulder attachment to sleeves using half-inch seam allowances, two-stitch seams, and precise alignment.

attach the sleeves, align the slits, and stitch along the marked line with one-inch seam allowances for neat finishing of the kurti.

Draw the draft on the lining fabric, fold, and cut with correct seam allowances and slits for precise cutting, then cut the main fabric with extra allowance.

Cut the fabric for sleeves and lining, draft the sleeve length and bottom opening, and mark a reference line. Align right sides carefully before stitching the lining for the kurti.

Attach the lining to the main fabric, stitch the neckline with a knee canvas finish, create notches to align the fabric, and top-stitch the necklines on the front and back.

Trim the excess fabric after attaching the lining to the main fabric, then attach the shoulders with two stitches and align the sleeve middle to the shoulder before careful stitching.

Learn to finish the kurti lining by attaching sleeve lining if desired, stitching sides with mid-stops, and folding the slit for a neat, straight finish.