
Fire safety is the set of practices intended to reduce the destruction caused by fire. Fire safety measures include those that are intended to prevent ignition of an uncontrolled fire, and those that are used to limit the development and effects of a fire after it starts.
Fire safety measures include those that are planned during the construction of a building or implemented in structures that are already standing, and those that are taught to occupants of the building.
You must be aware of fire safety because fires occur. Fires occur so regularly that most cities have full-time fire fighters. Preventing fires and Getting out Safely in a fire are key life skills.
In 2016, there were 1,342,000 fires reported in the United States. These fires caused 3,390 civilian deaths, 14,650 civilian injuries, and $10.6 billion in property damage.
· 475,500 were structure fires, causing 2,950 civilian deaths, 12,775 civilian injuries, and $7.9 billion in property damage.
· 173,000 were vehicle fires, causing 280 civilian fire deaths, 1,075 civilian fire injuries, and $933 million in property damage.
· 662,500 were outside and other fires, causing 85 civilian fire deaths, 650 civilian fire injuries, and $1.4 billion in property damage.
(Report: NFPA's "Fire Loss in the United States During 2016")
Threats to fire safety are commonly referred to as fire hazards. A fire hazard may include a situation that increases the likelihood of a fire or may obstruct escape in the event a fire occurs.
CONTROL MEASURES TO MINIMISE THE RISK OF FIRE IN A WORKPLACE
Ordinary Combustibles:
•Housekeeping.
Place oily rags in covered containers.
• Control smoking in the area.
• Limit sources of possible ignition.
• Keep passages and fire doors clear at all times.
• Know the locations of fire extinguishers
FLAMMABLE LIQUIDS
· Eliminate the combustible and flammable materials and substances entirely from the workplace.
· Substitute another that presents less of a fire risk
· Minimise the quantities of these materials present in the workplace.
· Only refuel equipment in well ventilated areas.
Properly store flammable liquids & Gases
· Use flammable liquids only in well ventilated areas.
· Ensure storage drums are properly grounded.
· Restrict hot work to authorized areas.
Use the minimum volume of liquid required.
Liquid should be in a properly labelled container.
Ideally the container will be metal with a self-closing lid.
Use a metal tray to catch spills and have absorbent material available.
Use the liquid away from heat and ignition sources.
Ensure that the workspace is well ventilated.
Liquefied petroleum gas (LPG) Fire prevention arrangements
· Bottles (cylinders) should be stored outside.
·
The storage area should be fenced with a secure, lockable gate.
· Warning signs should be displayed.
· Ignition sources should be eliminated from the area.
· Bottles should be kept upright and chained together.
· The storage area should be separate from other buildings.
· Empty and full bottles should be kept separate.
· Oxygen bottles should not be stored with LPG.
· Only those bottles actually required should be removed from the storage area and should be returned after use.
· Empty and full bottles should be kept separate.
· Oxygen bottles should not be stored with LPG.
· Only those bottles actually required should be removed from the storage area and should be returned after use
PRECAUTIONS FOR CONTROL OF HOT WORK
• Remove combustible and flammable materials.
• Cover with fire-retardant blankets-items cannot removed.
• The floor is swept clean.
• Any wooden floor is damped down.
• A suitable fire extinguisher is at hand.
• A “fire-watcher” is present in the area while the work is carried out.
• Visited routinely after the work. (60Min)
ELECTRICAL EQUIPMENT
• Inspect wiring and insulation frequently.
• Do not rout wires under carpets or heavy objects.
• Ensure motors are kept clean and lubricated.
• Be alert of unusual odors – investigate immediately.
• Ensure outlets and connections are not overloaded.
• Never misuse fuses, look for correct rating.
• Keep motors free of dust and excess grease.
• Ensure machinery is properly maintained.
• Keep motors free of dust and excess grease.
• Ensure machinery is properly maintained.
COOKING OILS AND FATS
Class F fires are fires in cooking oils and greases such as animals fats and vegetable fats.
· Never leave cooking food unattended – stay in the kitchen when frying, grilling or broiling food.
· Check your food regularly while cooking and remain in the home while cooking.
· Use a timer so you'll remember that the stove or oven is on.
A fire alarm system has a number of devices working together to detect and warn people through visual and audio appliances when smoke, fire, carbon monoxide or other emergencies are present. These alarms may be activated automatically from smoke detectors, and heat detectors or may also be activated via manual fire alarm activation devices such as manual call points or pull stations. Alarms can be either motorized bells or wall mountable sounders or horns.
They can also be speaker strobes which sound an alarm, followed by a voice evacuation message which warns people inside the building not to use the elevators. Fire alarm sounders can be set to certain frequencies and different tones including low, medium and high, depending on the country and manufacturer of the device. Most fire alarm systems in Europe sound like a siren with alternating frequencies.
Fire alarm electronic devices are known as horns in the United States and Canada can be either continuous or set to different codes such as Code 3. Fire alarm warning devices can also be set to different volume levels. Fire Alarm systems in the United Kingdom are tested at a weekly basis in compliance with the BS-fire 2013 regulations.
FIRE EXTINGUISHERS
How do fire extinguishers work?
· A ring or pin on the handle stops the fire extinguisher from being set off by accident. It also acts as a tamper-proof seal: if the ring is broken or missing, you know the extinguisher needs to be checked.
· Inside the sturdy steel case, there's a canister containing high-pressure gas (White).
· Extinguisher is filled with water or other extinguishing agent. (blue).
· A tube runs right up the inside of the tube to a nozzle outside (white).
· The nozzle often ends in a piece of bendy plastic so you can easily direct it toward the base of a fire.(Black arrow mark)
· To operate the extinguisher, you pull the ring and press the handle.
· Pressing the handle opens a valve that releases the pressurized gas from the canister.
· The gas immediately expands and fills the inside of the extinguisher, pushing the water downward.
· As the water is pushed down, it rises up the tube
· A jet of water emerges from the nozzle.
Fire emergencies can occur in seconds, threatening lives, causing severe injuries, and destroying vital company property. When a fire breaks out at work or home, taking prompt, correct, and confident action is key to minimizing damage and saving lives. Ask yourself: If a fire started near you right now, would you know how to assess the danger, select the correct extinguisher, and evacuate safely?
This Basic Fire Fighting & Prevention Guide is designed to provide you with comprehensive, practical knowledge of fire chemistry, prevention strategies, fire-fighting equipment, and life-saving evacuation procedures. Whether you are an employee, business owner, workplace safety officer, or individual looking to protect your home and team, this course will equip you with essential fire emergency preparedness skills.
What You Will Learn Across 4 Core Sections
Principles of Fire & Classification: Understand how fires start and spread through heat transmission (conduction, convection, radiation). Learn the distinct fire classifications and how to identify common causes and consequences in the workplace.
Fire Prevention & Risk Control: Master practical techniques to minimize fire hazards, including safe storage of flammable liquids and LPG, hot work safety precautions, electrical equipment protocols, and managing cooking fat/oil hazards.
Fire Detection & Extinguisher Operation: Learn about automatic fire alarm systems (heat, smoke, and flame detectors) and gain hands-on knowledge on how to select and operate different types of fire extinguishers using standard safety protocols.
Workplace Evacuation & Emergency Action: Master emergency evacuation routes, assembly point procedures, fire marshal responsibilities, and fire drills. Plus, learn immediate life-saving steps like what to do if clothes catch fire and essential first aid for burns.
Course Content & Modules Included
Section 1: Introduction to Fire Safety
Principles of Fire & Sources of Ignition/Heat
Static Electricity & Fuel Sources
Fire Classifications & Heat Transmission Principles
Causes & Consequences of Workplace Fires
Section 2: Fire Prevention & Control Measures
Controlling Fire Risks in Workplaces
Safe Storage of Flammable Liquids & LPG Arrangements
Hot Work Control Precautions & Electrical Safety
Kitchen Safety: Cooking Oils & Fats
Section 3: Fire Alarm Systems & Extinguisher Operation
Fire Detection: Heat, Smoke & Flame Detectors
Fire Fighting Equipment Overview
Selecting and Safely Operating Fire Extinguishers
Section 4: Evacuation Protocols & Burn First Aid
Means of Escape & Assembly Points
Roles of Fire Marshals & Conducting Effective Fire Drills
Rules for Fighting Fires Safely
Immediate Actions: Clothes on Fire & First Aid for Burns
Important Disclaimer
This course is designed for educational and instructional purposes to provide essential guidance on fire safety principles, extinguisher use, and evacuation procedures. It does not replace formal certified hands-on fire brigade training or professional site-specific safety audits.