AVEVA EVERYTHING 3D(E3D) - Beginner to an advanced level

Name: AVEVA EVERYTHING 3D(E3D) - Beginner to an advanced level
Rating: 3.1 (244 reviews)

AVEVA E3D complete Modelling

Created bySUHAIB AHMED

Last updated 11/2022

English

English [Auto],

What you'll learn

At the end of the course you will fully master in AVEVA E3D, to be able to conduct out your own industrial or chemical plant projects from scratch
You will become familiar with its interface,toolbars and basic commands and you will master in all the phases of the design,layout and configuration process
You will be able to design step by step procedure to create model using P&ID(pipe instrumentation diagram) and understanding all the logic
you will learn in a professional way the 3D modeling equipment,pipe,structures and grids
you will learn the design and generation of both isometric and orthographic plans,according to the std. and above all,understanding their interpretation
you will be able to practice the content learned in a practical way by following all the steps in the complete exercises
you will start with the basics and progressively carry out more complex until you will reach an advanced level and absolute mastery at the end of the course

Course content

7 sections • 43 lectures • 9h 10m total length

Introduction1:07
USER:SYSTEM (caps on)
PASSWORD:XXXXXX(caps on)
How to create a site, zone and Equipment3:16

Primitives4:14
Learn to create primitive shapes in AVEVA Everything 3D by using cylinders, setting diameter and height, and examining geometry, radius, base center, and view direction in the properties panel.
Negative Primitives or Extruction6:41
Create a nozzle and nozzle orientation10:10
Learn to create a nozzle and its orientation in AVEVA Everything 3D by modeling cylinders, specifying diameter and height, applying extrusion, and rotating about the X and Z axes.
Modify a nozzle and orientation11:09
How to create a horizontal equipment (REFLUX DRUM)28:26
How to create a vertical equipment (CRACKING TOWER)43:30
How to create a standarad equipment52:18
Arrangement of equipment19:12
Basic command used in equipment33:08

Creating a pipe and component13:27
How to create a branch pipe18:44
Learn to create a pipe and its component, create a branch pipe, and modify the piping with flange, elbow, and reducer using the e3d piping module.
Modify a pipe and component20:54
Learn to create a pipe and its component, establish a branch, and modify a pipe and its components, including elbows and reducers, in AVEVA E3D.
Pipe router30:03
Learn how to create pipes and components, establish branches, and route piping using the pipe router in AVEVA E3D. Master flange, elbows, reducers, and component modification to ensure accurate models.
Pipe sloping37:34
Create pipes and components, build branches, and modify piping connections and components in the Aveva E3D environment, including sloped pipe design and 3D isometric visualization.
Creating a branch pipe -1 (100-C-13)12:17
Creating a branch pipe -2 (150-A-57)31:34
Learn how to create a branch pipe in AVEVA E3D, using specification 150-A-57, setting diameter changes, adding elbow and reducer components, and configuring nozzle and direction.
Editor34:42
Use the editor in Aveva Everything 3D (E3D) to create and modify pipes and components, set directions and positions, and configure nozzles, elbows, reducers, and branches for coordinated piping.
Data consistency36:59
Create pipes and components in e3d while validating data consistency across connections, and use the editor to position elbows and branches and diagnose codes such as 1304.

Creating a columns and fittings7:38
Beta angle1:02
Rotate a column by adjusting the beta angle to face the east–west direction in AVEVA Everything 3D (E3D). Learn the beta angle concept and its role in column orientation.
Creating a beams, joints and connections5:28
Learn how to create beams, join columns to beams in e3d, select the column, apply an automatic connection, and align the column flange with the beam.
Cladding4:45
Create cladding in AVEVA Everything 3D by setting bottom distances, using distance snap, and generating multiple copies along a defined section.
mitre,split and merge2:41
Learn to split and merge in AVEVA Everything 3D (E3D) by selecting nodes, applying split to create separate beams, and merging the selections to form a mesh.
create a arc,ring and curve in section1:46
Create a covered arc and ring in AVEVA Everything 3D, using the arc tool to define diameter and start angles, applying a 180-degree sweep, then center the ring.
creating panels and fittings2:18
creating panel arc,disc,ring and negative extruction in panels3:43
Foundation2:43
Floors and Fittings1:22
Learn to create floors and fittings in Aveva Everything 3D, using flows and fittings such as furniture, anchors, embedded steel, and office tables.
walls and Fittings4:38
Learn to create walls and fittings in Aveva Everything 3D by selecting structure, applying default wall specs, setting height and thickness, and adding windows and doors at chosen elevations.
Create and modify Hand Rail3:28
Create and modify Rung Ladders3:51
Master the process of creating and modifying rung ladders in AVEVA Everything 3D (E3D). Use selection tools to configure alternate exit types and cages.
Create and modify Stair Flight5:54
Learn to create and modify stair flights in AVEVA Everything 3D by selecting a reference point, choosing a start type, and configuring extensions and landings.
components2:37

Rectangular7:13
Cylindrical3:06
Learn to create a cylindrical grid in AVEVA E3D by setting cylindrical radius, bottom elevation, and height, then define the section and generate the grid.
Rectangular Tower1:50
Triangular Tower1:15
How to create a building using grids1:28
Create a building using grids, including circular grids, to guide walls, columns, and beams. Add plates with negative extrusion, then fit walls, windows, and doors for a single floor architecture.
Final view of chemical plant1:35
Preview the final view of a chemical plant in AVEVA Everything 3D (E3D), highlighting the power house and its role in plant operations.

Requirements

Download and install AVEVA E3D
A decent computer and of course, desire to learn
Knowledge of Engineering Design

Description

AVEVA E3D fulfils three essential requirements:

To enable clash-free, multi-discipline 3D design, and rapidly generate accurate drawings and reports to meet demanding project schedules.

To reduce the costs, timescales and commercial risks of both new-build and brownfield capital engineering projects and support users’ long-term development of efficient Lean Construction methodologies.

To provide best-in-class project execution capabilities and the ability to collaborate with the extensive global community of AVEVA users.

The product contains the following main modules:

MODEL – interactive 3D design, consistency checking and Bills of Materials

DRAW – production of scaled drawings from the 3D model

ISODRAFT – production of piping isometrics from the 3D model

AVEVA E3D is quick to learn and use, minimising the time required to become fully productive. Its compatibility with other AVEVA solutions ensures access to an extensive global resource of skilled and experienced designers and system administrators, providing valuable flexibility in responding to fluctuating demand. AVEVA E3D offers exceptional efficiency in generating consistently highquality deliverables, adjusted to the latest construction site / fabrication yard conditions, and delivers substantial business value by reducing construction rework and dependably enabling more right-first-time construction. AVEVA E3D enables the efficient execution, not only of new-build projects but, importantly, of safe and rapid brownfield projects for the revamp or expansion of existing plants. Users can therefore tender competitively for the widest possible range of projects. AVEVA E3D readily integrates with other AVEVA products, providing extensive functionality for Integrated Engineering & Design. But AVEVA’s open design also facilitates information exchange with many thirdparty systems, enabling it to be implemented into existing technical infrastructure with minimal risk

Who this course is for:

AVEVA EVERYTHING 3D is the world most technologically advanced and powerful 3D design solution for the process plant and power industries
E3D software is not a much complex designing software any other designing software.
who are search a perfect designing software in oil and gas domain E3d is suitable for your career

AVEVA EVERYTHING 3D(E3D) - Beginner to an advanced level

What you'll learn

Explore related topics

Course content

INTRODUCTION2 lectures • 4min

EQUIPMENT MODULE9 lectures • 3hr 29min

PIPING MODULE9 lectures • 3hr 56min

STRUCTURES MODULE15 lectures • 54min

GRIDS6 lectures • 16min

ISODRAFT1 lecture • 4min

DRAFT1 lecture • 26min

Requirements

Description

Who this course is for: