Udemy
    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
Subscribe
Turn what you know into an opportunity and reach millions around the world.
Learn More
Your cart is empty.
Keep shopping
Autodesk Fusion 360 - 3D Modeling and CNC Basics
Rating: 4.7 out of 5(183 ratings)
932 students

Autodesk Fusion 360 - 3D Modeling and CNC Basics

Learn along with a live student of Autodesk Fusion from the ground up.
Created byTai Fiebig
Last updated 1/2025
English

What you'll learn

  • Basic 3D Modeling
  • How to Read Technical Drawings
  • How to Make Assemblies
  • Create Toolpaths in your Manufacture Workspace for CNC Machines
  • How to run a CNC plasma cutter

Course content

9 sections • 9 lectures • 7h 19m total length

  • Introduction to this course0:23

    Please note that this course was originally posted on YouTube on our Channel - Learn It! Already. We are keeping the first lesson posted to advertise this course, removed the next 5 lessons, and have never posted the final 2 lessons. Many have expressed their appreciation of these lessons, which we have included some of their comments. We hope that you benefit from this entire course as a new Autodesk Fusion user.

Requirements

  • No prerequisites. Basic computer knowledge is beneficial.

Description

This is an unprocessed, unfiltered live session of a real student that has no knowledge of Autodesk Fusion (previously known as Fusion 360).

The Learn It! channel is happy to teach Dan how to go from ZERO to HERO in his quest to learn Fusion 360. His goal is simple: get to the point of learning how to run his CNC plasma cutter.

Hi my name is Tai. I started running machines at the age of 12, started running CNC machinery at the age of 15, and for the next 20 years have run some of the finest CNC equipment that is produced in the world. Now I teach Autodesk Fusion in classroom settings, private one-on-one classes, and have my own YouTube channel were I teach Autodesk Fusion.

Dan will learn how to navigate Autodesk Fusion, create basic to complex 3D models, learn many tools throughout the process, and finally get to the end of his quest of using Fusion to run his plasma CNC. He asks many questions along the way which are the exact same questions that you might ask if you had one-on-one instruction.

So, if you're in the same position or have the same goal, then this series is for you.

Oh, and yes, he is using the Personal License of Fusion 360.

Who this course is for:

  • Brand new users of Autodesk Fusion that would like to get started in running their CNC

Report abuse