AutoCAD Structural Detailing Course

Configure AutoCAD for structural detailing by setting millimeter units and limits to 50,000 by 50,000. Create layers for column, beam, grid, trench, and footing with colors and 1 mm lines.

Set up the AutoCAD grid by configuring layer properties and construction lines, then adjust the line type scale to reveal center-to-center wall spacing.

Offset grid lines to center the walls, move lines to the default layer to inherit its properties, and prepare to trim in the next tutorial.

Trim extraneous lines to finalize wall outlines, offset key dimensions, and move elements to layer zero, completing the walls setup in this AutoCAD structural detailing tutorial.

Offset and adjust grid lines to correct wall placements, trim unneeded segments, set dimensions to 3150 and 2750, and create a new layer named grid numbering for the next steps.

demonstrates grid numbering in AutoCAD by trimming walls, joining lines, creating a numbering grid layer, and configuring text height and offset.

Set up a grid dimension style in AutoCAD, configuring text size, base line spacing, arrow settings, align with dimension line, and decimal formatting, then apply continuous dimensioning to grid lines.

Insert columns using the grid as a reference, fix locations, and develop a column layout with sizing, numbering, and a naming scheme (A1, B3, etc.) while using layers and hatching.

Create a new layer named column numbering in layer properties, set it to default continuous, select the item, switch it to column numbering, and assign it the name column A1.

Copy the column and footing to create detailing, establish a reinforcement layer with centerlines, apply rcc linear dimensions with decimal units, and offset the footing by 20 for detailing.

Learn to create column detailing in AutoCAD, offset and trim elements, set reinforcement properties, add dimensions and text, apply hatch, and assemble the detailing with copy, rotate, and mirror operations.

Detail a column cross section in AutoCAD by setting the proper layers, drawing the footing and column to given dimensions, and placing seven Y-12 reinforcements on the reinforcement layer.

Design the building footing on the footing layer, remove grid numbering, and set a 750 by 750 footing using rectangle and dimension tools, then copy it for future numbering.

Learn how to number footings in AutoCAD by creating a dedicated footing numbering layer, setting default line width and red line color, and applying numbering commands.

Learn how to insert beams by selecting geometry, moving it to the BIM layer, applying dashed line properties, and copying and deleting to finalize the beam.

Learn to set up beam numbering in AutoCAD, create a beam numbering layer, mark current beams, and label duplicates as beam one (b1) with consistent dimensions.