AutoCAD Pressure Vessel Designer Course 2016-2022

Create precise line geometry in AutoCAD by defining start points, directions, and lengths, using horizontal, vertical, and 30-degree lines, with undo and close options.

Learn to use the absolute coordinate system in AutoCAD, starting at origin 0,0, to plot points with exact x and y values and draw lines by entering coordinates.

Explore the relative coordinate system by tracing movements from a previous point, using zero, zero as origin, and plotting x and y shifts to close the shape.

Explore the polar coordinates system by constructing lines from the origin using two syntax methods, with lines at 0°, 45°, and negative angles, and understand anticlockwise versus clockwise directions.

Create polylines by combining lines and arcs, setting precise start and end points, and using zero coordinates for straight segments. Edit with grips and undo as needed.

Create circles in AutoCAD using center radius, center point, two-point, three-point, and tangent methods; switch between radius and diameter, adjust values, and use shortcuts like C.

Master arc creation in AutoCAD by using three-point arc, center-point arc, and radius/angle options, including start, center, and end points, with tangential and opposite direction controls.

Learn to create and dimension a rectangle in AutoCAD by using corner points, setting origin and rotation, selecting mm units, and applying the normal rectangle option with keyboard input.

Open the polygon tool from the drawing toolbar, set six sides, and specify the center point. Choose inscribed in circle or circumscribe with a 100 mm radius.

Create ellipses and elliptical arcs in AutoCAD by defining center and endpoints, specifying axis distances, and using edit options to modify or delete.

Learn how to create hatches in AutoCAD by validating closed boundaries, using the hatch tool to apply patterns, adjust colors, transparency, and match properties across objects.

Set an origin in hatch using the hatch tool, choosing corners or center, so patterns start from that point and you can store it as a default origin.

Create associative hatches in AutoCAD and compare with non-associative hatches. See how changing the underlying sketch updates the hatch automatically.

Use outer island detection in hatch to hatch only the selected area, yielding cleaner boundaries. Compare normal and ignore island detection, and favor outer island detection for best results.

Learn to create separate hatches in AutoCAD pressure vessel design, switching between separate and combined hatch options, selecting portions, and finalizing hatch creation with the separate hatch option.

Create and customize gradients in a gridiron hatch using the gradient toolbar, ensure closed boundaries, adjust hatch colors, and apply material properties for a uniform gradient.

Master boundary creation in AutoCAD using the boundary toolbar, select object type, pick points to outline areas, and convert boundaries to regions for 3D modeling.

Practice drawing in AutoCAD for pressure vessel design, focusing on creating lines with precise lengths and angles and applying linear and angular dimensions.

Create a spline in AutoCAD by selecting points and using control vertices (CV). Switch between fit and through points modes and adjust with knobs to refine the spline.

AutoCAD construction line basics are demonstrated, showing how to create reference and front lines using the construction line toolbar, offset, and bisect tools for precise layouts.

Learn how to use the ray tool in AutoCAD to create straight lines from a start point, apply vertical or horizontal constraints, and work with shortcuts for quicker drawing.

Create points in AutoCAD and change point types with keyboard shortcuts, specifying x and y coordinates and adjusting visibility and sizing for clear display.

Learn to divide a line into equal segments using AutoCAD's divide tool, placing points along the line with the specified segment count.

Learn to use the measure tool in AutoCAD, divide lines into equal segments with a specified segment length (for example 20 mm), and place points for precise measurement.

Learn how to use the wipeout tool in AutoCAD to hide selected areas, create lifeboat areas, and print clean drawings for client delivery.

Learn to create a doughnut in AutoCAD by adjusting the inside radius and outer areas, using the donut command via the toolbar or typing d and pressing enter.

Create revision clouds in AutoCAD using rectangle, polygon, or freehand tools, convert to uniform arc with revision cloud variance, and modify clouds by selecting objects, adjusting direction, and applying styles.

Practice drawing in AutoCAD by creating lines, ghosting, and dividing lines into segments. Learn to set six segments, place and edit points along a line, and adjust geometry.

Master the AutoCAD move command by selecting objects and defining a base and second point. Position with absolute coordinates, X and Y values, and perpendicular or nearest constraints for precision.

Learn how to copy objects in AutoCAD with base points, multiple and sequential copies, copy to other files, and paste as blocks, including using shortcuts like Ctrl+C/V and managing blocks.

Learn to use the stretch tool in AutoCAD by selecting with a crossing window or polygon, setting a base point, and entering precise distances and directions to resize objects.

Master the rotate tool in AutoCAD by selecting objects, specifying a base point, and applying clockwise or counter-clockwise angles such as 45 or 90 degrees, with copy and reference options.

Master the AutoCAD mirror tool by selecting objects and a mirror line to create mirrored copies, including text, with optional erase of the source object and vertical or horizontal reflections.

Learn to use the AutoCAD scale tool to resize objects for pressure vessel design, using base point, scale factor, and reference length, then copy, measure dimensions, and verify accuracy.

Master the trim tool in AutoCAD 2021 and above to remove extended portions with clicks or the D shortcut. Versions 2020 and below require additional steps with the promo tool.

Trim in AutoCAD 2020 and below versions: learn to select objects, use the trim tool, trim across crossing lines, trim multiple lines, and use keyboard shortcuts for efficiency.

Learn to extend objects to the next boundary in AutoCAD 2021 and above, using near-to-boundary cues, crossing selection, and the X shortcut for quick extents.

Learn to extend in AutoCAD 2020 and below by selecting a boundary and extending objects to that boundary or to the next boundary, using the extend tool and keyboard shortcuts.

Apply a fillet with a 20 mm radius by selecting two objects, then use the multiple option to trim or extend lines and adjust fill modes as needed.

Learn to create chamfers in AutoCAD by selecting two lines, entering first and second distance values, and applying multi-step chamfers that join intersections.

Master blend curves in AutoCAD by connecting lines with tangential transitions, adjusting control vertices, and applying blend goals to create smooth, seamless curves.

Create a rectangular array in AutoCAD to arrange objects into specified columns and rows, adjust spacing, and modify the array using associate and mirror features.

Use the polar array to arrange items around a center point, set the number of items and the angle, and adjust distance and orientation as needed.

Learn to create and edit a path array in AutoCAD by selecting objects, defining a path, and adjusting distance, quantity, and division to arrange items precisely.

Learn to erase objects in AutoCAD using the modify tool, crossing window or single-selection, then delete with the delete key, keyboard shortcut E, or right-click erase.

Use the explode command to convert blocks into separate lines and objects. Learn to select an object, enter explode, and view the resulting individual elements in AutoCAD.

Master the AutoCAD offset tool to create parallel copies of objects, set distance, apply to multiple items, choose sides or inside/outside, and control gap and offset type for precise detailing.

Develop practical AutoCAD drawing skills by creating precise rectangles, applying dimensions, using midpoint and trim tools, drawing circles with radius, and aligning lines with tangent snap.

Learn to lengthen AutoCAD geometry by selecting objects and applying delta, percentage, or total length controls to adjust line alignment, angles, and arcs dynamically.

Align geometry precisely with the align tool in AutoCAD, selecting lines and objects and specifying source and destination points to keep a door inside the opening.

Learn to edit a polyline by manipulating vertices: add, remove, move, and reverse vertex order; adjust coordinates and segment properties; apply joins, breaks, and tangent fit to refine the shape.

Learn how to break AutoCAD objects between two points, select the object to break, and manage breakpoints, arcs, and the counterclockwise direction for precise edits.

Join lines and objects in AutoCAD using the join tool, selecting the joint and objects in the correct order, and ensuring the combined geometry follows a counter-clockwise direction.

Explore how the reverse tool in AutoCAD flips line direction and arrowheads, allowing you to reverse selected polylines and adjust arrow directions for accurate vessel design.

Learn to copy nested objects inside blocks by entering the block editor, selecting blocks, and creating multiple copies.

Identify and delete duplicate objects in AutoCAD to prevent print darkness from overlapping lines, using the duplicate object tool to clean sketches and ensure accurate final drawings.

Learn to control draw order in AutoCAD by bringing objects forward or back, setting a reference object, and aligning text, dimensions, leaders, hatches, and annotations for clear drawings.

Learn to use grips to manipulate grouped objects in AutoCAD, including moving, rotating, scaling, mirroring, stretching, copying, and editing radius and text within multi-function groups.

Practice drawing in AutoCAD using rotate copy, base points, and precise lengths to create and dimension a drawing, adjusting lines to specific measurements with snap, extend, and join tools.

Enable and customize the AutoCAD grid (F7), adjust major and minor line colors and spacing, set grid dimensions and axes, and save your personalized grid settings.

Master AutoCAD snapping techniques by configuring grid snap, polar snap, and isometric snap to control line starts, angles, and distances for precise 2D drawings.

Enable ortho mode (F8) to constrain lines to horizontal or vertical, and toggle auto mode on or off. Use polar coordinates, snap, copy, and join to place circles and geometry.

Polar tracking (F10) snaps lines to specified angles such as 90, 45, and 60, or custom angles, enabling precise horizontal, vertical, or inclined drawings.

Enable and use dynamic inputs in AutoCAD, adjusting line and circle dimensions, location, radius and diameter, and locking values via the tab key and dynamic input settings.

Master object snap (osnap) in AutoCAD, using F3 to toggle endpoints, midpoints, centers, intersections, tangents, and more for accurate, efficient drafting.

Master object snaps by using shift+right-click to access point snaps, including endpoint, temporary trackpoint, and 3D snap, while learning to switch on snap settings for precise lines.

Access quick properties to view key attributes such as color, radius, diameter, circumference, area, and line type, and modify them directly to speed up your workflow.

Master selection cycling in AutoCAD to choose among overlapping objects, using customization options to reveal duplicates and components, and apply precise edits to the selected item.

Enable and view coordinates in the AutoCAD status bar by customizing the interface, turning on coordinates, and observing how mouse movement updates them.

Learn how to lock the AutoCAD pressure vessel designer interface to prevent accidental changes by locking toolbars, panels, and windows, with options for floating toolbars and global lock.

Toggle a clean screen with the Ctrl+0 shortcut to maximize workspace by hiding or showing all tools, and learn how to customize and switch back as needed.

Explore line weight and line customization in AutoCAD, including working with circles and lines, and prepare drawings for printing to ensure proper output.

Explore how four constraints, including dimensional constraints, govern geometry in AutoCAD; binding constraints preserves the original shape while dimensions can change.

Explore how to customize and set AutoCAD units in the status bar, choosing engineering or decimal layouts, and switching between feet, inches, and meters for precise designs.

Practice drawing in AutoCAD by building a symmetric pressure vessel sketch with lines, arcs, rectangles, and pillars, using mirror, snap, and dimensions for precise gaps and radii.

Learn to measure distance, radius, angle, and coordinates in AutoCAD using utilities, quick properties, and coordinate data, including x, y, z, and centerpoint references.

Measure area and perimeter of shapes in the AutoCAD pressure vessel designer course 2016-2022, using object selection, i key, and the area tool, then subtract to get outside area.

Apply the quick measure tool to identify distances, circle radii, and angles on floor plans, including 90-degree indicators, and instantly compute areas and perimeters.

Master AutoCAD's quick select and select all workflows to rapidly isolate areas, objects, or text, refine by layer and criteria, and use select similar for efficient editing.

Explore a quick calculator tool for efficient AutoCAD pressure vessel design calculations, including line-based input, coordinates, distance measurement, unit conversion, area and volume calculations, and variable management.

Apply object color in AutoCAD using properties, select the object, and choose color, truecolor, or color book; for better presentations, use layers to control colors.

Learn to set object line weight and transparency, adjust line rates, and control display line properties in AutoCAD, then check your drawing before printing.

load line types, set the current line type, and use match properties to apply consistent properties, color, and visibility across objects.

Explore the property palette to edit object color, layers, and line type, view geometry details such as radius, diameter, circumference, and area, and access the x y z coordinates list.

Learn to create linear dimensions in AutoCAD, choose a dimension style ISO 25, and place horizontal or vertical dimensions with extension lines for clear annotations.

Learn to create aligned dimensions in AutoCAD using the Annotator, selecting lines and endpoints, applying center snaps, and placing dimensions with grips and quick keyboard shortcuts.

Master angular dimensioning in AutoCAD by using the annotator and dimension tools, selecting lines, circles, and vertices, and applying keyboard shortcuts for quick placement.

Learn to annotate and create arc length dimensions in AutoCAD for pressure vessel design, by selecting arcs, applying dimension commands, and placing the dimensions inside or outside.

Master creating a dimension radius in AutoCAD using annotate and dimension tools, selecting arc options, and placing the dimension inside or outside.

Create dimension diameter by selecting the diameter and arc, then place the leader to visualize the measurement. Place the dimension inside or outside the circle to adjust the diameter value.

Create a jogged dimension in AutoCAD by selecting a dimension style, choosing nozzle details, and using keyboard shortcuts to form a dark dimension with a circular radius.

Master ordinate dimensions in AutoCAD by setting the origin at zero zero, defining x and y directions, and applying the ordinate dimension style to locate the nozzle on the vessel.

Learn to create and continue dimensions in AutoCAD, starting from the last point, selecting objects, and placing linear and angular dimensions with keyboard shortcuts.

Learn how to create baseline dimensions in AutoCAD by selecting a baseline, using extension lines, and adjusting baseline spacing to achieve even gaps.

Modify dimensions in AutoCAD using grips, baseline and continue dimensions, and adjust text, arrows, and alignment. Create angular, radius, and diameter dimensions, convert to text, and add prefix or suffix.

Master the single dimension tool in AutoCAD to create linear, aligned, angular, and radius or diameter dimensions. Learn to apply baseline, continuous, and alternate dimensions and place them precisely.

Create a new AutoCAD dimension style with the Dimension Style Manager, starting from ISO 25 and customizing units, text, arrows, lines, and scale for precise two-dimensional drawings.

modify dimension style in AutoCAD to edit lines, text, colors, symbols, and units, save changes as current style, and apply modifications to selected dimensions.

Learn to create and manage dimension style overrides in AutoCAD, apply changes to dimensions, switch styles, and remove overrides to revert to the original style.

Compare dimension styles in the dimension style manager to see differences between two options. Use the compare dimensions feature to identify changes and avoid design difficulties.

Learn how to set primary and alternate units in AutoCAD dimension styles, including mm, feet and inches, engineering format, prefixes and suffixes, and display options.

Learn to apply dimension tolerance in AutoCAD with the dimension style manager, using symmetrical, deviation, or limits options, plus/minus values, and manual or shortcut methods.

Learn how to break dimension and extension lines in AutoCAD to manage crossing dimensions, using break, break multiple, and remove options.

Adjust the space between dimensions in AutoCAD by selecting a base dimension, choosing a direction, and entering a spacing value, with options for auto spacing and shortcuts like B.

Learn to add and remove jog line in dimension within AutoCAD, selecting the dimension and applying or removing the jog line.

Add or remove inspection information on dimensions in AutoCAD by selecting a dimension, entering inspection data, and applying labels, with text adjusted as needed.

Learn to update dimensions in a CAD pressure vessel model by creating new dimensions, manually adjusting styles and scales, and applying the update command to refresh all dimensions.

Learn to reassociate a dimension using the annotator tool, select the dimension and its extension points, and apply the three associate option to attach it to a line.

Learn how to rotate dimension text in AutoCAD by selecting the dimension, entering a new angle, undoing with Control Z, and using match properties to reuse angles.

Learn how to justify dimension text in AutoCAD using toolbar tools to left justify or center the dimension text by selecting the dimension.

Learn to create and customize center marks in AutoCAD, adjusting color, line type, extension, skin factor, length, and rotation, using keyboard shortcuts to place center marks accurately.

Create a centerline in AutoCAD by selecting two lines and using the centerline tool, then customize color, line type, and scale through the properties panel.

Practice drawing in AutoCAD by creating and styling dimensions, lines, and text, adjusting colors and precision, and completing linear and vertical dimensioning with radius and arc details.

Learn to create a quick leader in AutoCAD by placing points, setting text height, and adjusting color, line styles, and scale via the dimension style manager.

Explore quick leader settings in AutoCAD to create annotated leaders efficiently, adjusting text options, justification, attachments, block references, tolerances, and arrowhead styles.

Create multileaders in AutoCAD by configuring arrowheads, text, and leader styles, then place points and adjust content and font for precise annotations.

Explore multileader options in AutoCAD, including leader types, landing behavior, block content, and multi-leader setup to customize text and block-based annotations.

Modify multileaders by creating two-point and three-point leaders and editing grips. Adjust color, line type, scale factor, text height, landing distance, arrow size, copy or mirror to manage leaders.

Create and customize a new multileader style in AutoCAD, configuring format, arrowhead, color, line type, text content and height, then apply it to two-point or three-point leaders.

Master creating datum references for feature control frames in gd&t using multi-layered datum structures, with horizontal and vertical alignments, and understanding primary, secondary, and tertiary data.

Create a feature control frame in AutoCAD using geometric dimensioning and tolerancing, including position tolerances, diameter, maximum material condition, and datums 1–3.

Practice creating multi leaders in AutoCAD, using multimedia style manager to define text, attachments, colors, and layer-based styles for clear, scalable annotations.