AutoCAD 2D&3D Smart House Exterior + Interior Design Course

Introduction to house project two-dimensional, showing how to start a two-dimensional house project, create layers, text and dimension styles, foundation and structural columns, and set up title blocks.

Start a new 2d house project in AutoCAD by creating a file from the quick access toolbar, selecting imperial template, setting workspace, defining limits, zooming to limits, and saving.

Create organized layers in AutoCAD using the Layer Properties Manager to add and customize boundary wall, center line, dimension, door, and other layers with specific colors and line weights.

Create a new text style in AutoCAD by opening the text style options, choosing Arial as the font, and saving the new style.

Create a new AutoCAD dimension style (D15) with by-layer, symbol and arrow sizes, green 0.1 inch text aligned to dimension line, and set the scale to 15 with fractional units.

Create a foundation grid in AutoCAD by drawing longitudinal and cross lines, applying precise feet and inches offsets, and labeling grid marks 1–7 and A–F using the provided PDF resources.

Create a pad footing plan view by drawing a 2 ft by 2 ft rectangle, use object snaps to find the geometric center, and copy placements to grid intersections.

Create foundation column plan view by drawing 1 ft by 1 ft and 9 in by 9 in columns, placing them at centers, copying to locations, and elevating to zero.

Create a structural column plan view by defining foundation columns and eight by eight inch columns, placing footings, hatch fills, and aligning with a geometric center.

Finish the foundation plan view by adding the dimension leader line and centered text, using dim style d 50, creating linear dimensions, and aligning text on the plan.

Create ground floor walls for a floor plan in AutoCAD by defining nine inch primary, six inch secondary, and inside walls, placing, copying, and joining lines for a 3D-ready result.

Place the main door on the ground floor plan, size it to 60 by 84 inches, and adjust the door opening with trim and wipeout.

Create a ground floor room door for an AutoCAD floor plan by drawing and placing a 36x84 inch door using rectangle, offset, trim, wipeout, mirror, and rotate.

Learn to place and size a toilet door in a ground floor plan using AutoCAD, including creating rectangles, setting dimensions, offsetting walls, trimming, wipeout, and final placement.

Learn to create and place window type one in AutoCAD for a smart house exterior, detailing its dimensions and precise placement with midpoints and offsets.

Learn to place window type 2 and toilet louver windows in AutoCAD 2D and 3D for interior design, drawing rectangles, setting 24x24 openings, applying wipeouts, and offsetting with midpoints.

Place and dimension a window type three in AutoCAD 2D/3D, setting 16 inch width and related dimensions, then use wipeouts, offsets, copies, and mirror to finalize placement.

Create an arch opening on the ground floor floor plan by drawing a 60 by 84 inch opening, using lines, hidden layers, and the arch tool with precise midpoint placement.

Create a floor plan by defining tread and riser dimensions, using rectangles and dimensional commands to place and copy each stair step.

Learn how to create a staircase plan view in AutoCAD, defining treads and risers, setting dimensions, and assembling 21 steps across two runs to align with ground and roof levels.

Finish the ground floor plan by placing dimensions and room labels on correct layers and scales. Center text for rooms and align walls with nine inch and six inch sizes.

Create a ground floor home space planning view by arranging 2D and 3D CAD blocks, downloading furniture blocks from online resources, and calculating square-foot areas for a precise layout.

Create a roof plan view by drawing centerlines, offsetting walls to 4.5 inches, establishing a parapet wall, trimming lines, applying linear dimensions, and labeling the view roof plan.

Create a south elevation view in AutoCAD by constructing lines, offsets, rectangles, and trims, then join elements and apply precise dimensions for a complete exterior design.

Create a south elevation in AutoCAD by constructing the ground location, applying offsets, trimming and joining lines, rotating components, and placing windows with sunshade for a closed 2D elevation.

Continue the south elevation view by placing doors and walls, applying textures and hatch colors, creating grids and dimensions, and preparing both detailed and simple views.

Create a south elevation view in AutoCAD 2D using linear dimensions, text, and scale 1:25, including placement of dimensions and elevation labels for exterior and interior design.

Learn to create a west elevation view in AutoCAD by drawing walls, windows, and sunshade design, using offset, copy, rotate, trim, and dimension commands.

Create the west elevation view by drafting lines, rectangles, and offsets, arranging parapet elements, gaps, and mirrored copies, then trim and finalize the exterior design.

Create the west elevation view of a smart house in AutoCAD by using offset, trim, join, rectangle and circle tools, adding windows with sunshade, lintel, steps, and dimensions.

Create the west elevation view by applying hatch patterns and colors, defining boundaries, placing grid lines and dimensions, and configuring text and scale to complete the detail view.

Create a staircase for the west elevation view in the AutoCAD 2D&3D smart house exterior course, using lines and rectangles, with six-inch risers, three-foot steps, and ten-step repetition.

Create boundary wall and friend gate plan view in AutoCAD, detailing seven-foot offsets, dimensions, and gate placement for a smart house exterior.

Finish the boundary wall and gate plan view in AutoCAD by cleaning dimensions, editing blocks, and creating center marks and center lines with the correct dimension style.

Create a typical boundary wall detail view in AutoCAD, drafting walls and columns, using precise dimensions, offsets, midpoints, center lines, trims, and copies for a clean, ready diagram.

Create a typical boundary wall sectional view in AutoCAD by drafting the boundary wall, applying offsets for thickness, and adding dimensions, center lines, and section labels.

Learn to build a front gate detailed view in AutoCAD 2D and 3D, including gate dimensions, offsets, rectangles, and precise dimensioning with leader lines.

Create a boundary wall and front gate elevation view in AutoCAD by drawing lines, copying components, and refining dimensions and center lines for a precise exterior design.

Create a foundation sectional view in AutoCAD by detailing footing, foundation columns, beams, floor levels, and ground floor geometry, while applying centerline layouts, offsets, dimensions, hatch, and section marks.

Create foundation sectional views B and CC in AutoCAD by studying the plant view, adjusting foundation column sizes, and applying hatch.

Create an ANSI C title block for a 22 by 17 inch paper in AutoCAD, detailing precise dimensions and offsets. Build block attributes for project data and revisions.

Create an ANSI title block in AutoCAD by defining block attributes for drawing name, drawing number, sheet number, scale, and revision, then place and adjust the block in layouts.

Create a page setup in AutoCAD using the page setup manager, with a custom 22x17 inch size and margins, then place the title block in the layout and preview.

Arrange drawings inside layout by configuring page setup and inserting the title block, then place the foundation plan at 1:250 and 1:50 in layout and model space.

Arrange foundation and floor plan views in AutoCAD layouts, apply multiple scales, manage title blocks, and prepare layout pages for exterior and interior design.

learn to add and apply custom scales to layout viewports in AutoCAD by selecting viewports, choosing custom scale, previewing, and placing the scale across drawings.

Learn to change titles on the title block across foundation plan, view, and sectional drawings, updating drawing names, numbers, sheet numbers, tag numbers, and prompt values with the layout tool.

Learn to add and manage a drawing revision, including choosing a revision purpose (training, internal, approval, or construction), applying revision marks and cloud changes, and updating description, date, and names.

Learn to print AutoCAD drawings as pdfs by plotting multiple layouts, previewing plots, and publishing to the desktop, ensuring centerlines and margins appear correctly.

Start a new AutoCAD 3D house project by selecting the imperial template and engineering position, then switch to 3D modeling, save, and view southwest or southeast isometric and realistic.

Create a 3d pad footing from the foundation plan by copying, placing in the house project, exploding the blocks, and extruding to one foot height at elevation zero.

Create a 3D foundation column in AutoCAD by selecting the foundation column block, adjusting properties, and copying references. Extrude to four feet and place endpoints to finalize the 3D column.

Create a 3D foundation beam in AutoCAD by copying the plan, placing on the working plane, and aligning to the midpoint before extruding to two feet six inches.

Create a 3d floor for the ground floor by copying the floor plan, extruding it six inch on the working plane, then orbit and place.

Create a 3D ground-floor wall by converting a copied floor-plan wall in AutoCAD, exploding blocks, pulling to shape, and adjusting 1.5-inch gaps for proper alignment.

Learn to create door openings in walls using rectangle commands, set main, room, and toilet door dimensions, position and copy endpoints, and set a 2 to 4 inches sill height.

AutoCAD 2D&3D course: create arch opening in a 3D wall by sizing 60 by 84, adding a 30 inch radius, and offsetting a 1 inch border using midpoint and presspull.

Create 3d flooring tiles and marbles, assign floor materials from the Autodesk library, adjust texture orientation, and replicate patterns across rooms for accurate interior design.

Learn how to create a 3d baseboard or socket in a smart house design. Outline and join lines, sweep a profile, place it precisely, and apply materials for realistic rendering.

Create a 3D main door by sketching on the working plane, extruding the shape, and applying textures with the material browser using the 60 × 84 inch size.

Create a 3d room door by drawing a rectangle, extruding, duplicating, editing materials, and sizing to 36×84, then mirror or rotate to place doors on all sides.

Learn to create a 3D toilet door in AutoCAD by modeling a rectangle, extruding to height, applying materials, and adjusting orientation with rotate and mirror for correct opening side.

Demonstrates creating window openings in a 3d wall with AutoCAD, detailing window types and dimensions (46x53, 24x24, 16x48), placement, copying endpoints, and sill height references.

Create a 3d window type-1 by drawing polylines, offsetting lines, extruding a 0.5 inch frame, applying glass material, and duplicating/rotating components for accurate placement.

Create a 3d window type 3 in AutoCAD by drafting a 16 by 48 rectangle, extruding to 1 inch, applying glass and frame materials, and removing extraneous lines.

Create a 3d staircase in autoCAD by building geometry with copy, polyline, circle, and extrude, then union, imprint, and assign materials to faces for a realistic finish.

Learn to create floating flooring for the staircase area in AutoCAD 2D & 3D by extruding a 0.5 inch profile, setting endpoints, applying a flooring material, and joining the geometry.

Create 3d steps for a smart house by copying steps from one project to another, then extruding endpoints to form the stair geometry and applying a floating material.

Copy the roof plan from house project two to three-d, extrude to six inches, and place to form the roof; create a staircase cutout with rectangles and polylines.

Create a 3d parapet wall for exterior design by modeling two parapets, adjusting dimensions, extruding to three feet, and applying copy, move, trim, and join operations in the house project.

learn to rearrange column height by isolating objects, editing blocks in place, and adjusting distances with wireframe dimensions to achieve a properly aligned exterior and interior design.

Create a 3d exterior house design in AutoCAD by setting elevations, managing layers and dimensions, extruding walls, adding sunshades, and preparing the model for material application in the next lecture.

Apply exterior materials in AutoCAD 2D/3D by painting walls white and red, adding stone textures, removing relief patterns, adjusting angles, and saving the design.

Create a 3d exterior design focused on sunshade details for windows, using extrusion, copying, and placement in a west elevation, then apply white and black paints via the material browser.

Create and place an exterior wall in AutoCAD using elevation views, extrude to six inches, align above the floor and foundation beam, then assign materials and finish with red paint.

Apply white paint to wall faces in the AutoCAD 2D&3D smart house exterior + interior design course, using face selection and assign to selection to ensure proper rendering.

Apply plaster material to the foundation area in a 3d house model, using autodesk autocad 2d/3d tools, dimensions, sweeps, and material assignments for a realistic finish.

Create a 3D boundary wall by copying from project two D to project three D, placing coordinates, extruding to four feet six inches, and applying white and red paint.

Apply grass material to a surface in AutoCAD 2D/3D for the smart house design course, assign to faces from the Autodesk library, and adjust size.

Apply paving tiles in a 3D house exterior and interior design workflow by selecting objects, drawing polylines, placing imprints, and assigning materials to sidewalks and tile patterns.

Create a road in AutoCAD by drawing polylines, applying perpendicular constraints, and setting a three-foot radius, then use the material browser to assign site work and solid phase visualization.

Place and adjust the exterior camera in AutoCAD by setting location, target, and field of view, then fine-tune X, Y, Z coordinates to achieve the desired rendering.

Create exterior rendering in AutoCAD by configuring the camera and custom model view, set render size and quality, then render and save the final 3D house image.

Create a 3D interior ceiling design in AutoCAD by modeling from the floor plan, using extrude and offset operations, placing lighting holes, and saving separate interior 3D files.

Create an interior ceiling design by detailing a corner mould with lines, radii, and a sweep in AutoCAD, then place and edit blocks to update the ceiling mould.

Model a round ceiling light in AutoCAD by combining cylinders and circles, apply glass and luminous materials, place a point light, adjust intensity, and duplicate layouts with copy and mirror.

Create a 3d ceiling light in AutoCAD by revolving arcs for a 360-degree housing, extruding the body, applying luminous translucent white material, and adding a d65 white point light.

Create red moonlight in a smart house project by editing materials and duplicating light blocks, then assign red color and place ceiling lights using block editor and polar array.

Place AutoCAD 3D furniture blocks inside the building, snapping to end points for precise placement. Assign materials from the material browser, like clear glass and fabrics, to furniture.

Place a camera for interior design, then isolate and hide objects to reveal interiors, visualize and create the camera view by adjusting position, field, and height.

Master applying interior paint in AutoCAD by selecting the ceiling, isolating objects, and using the material browser to assign orange, yellow, red, and white paints to interior faces.

Learn to create interior design renderings in AutoCAD 2D&3D, set up visualization, render with high quality, adjust lighting, and save final images.

Learn to place 3D images in a layout for an AutoCAD house project by creating and arranging exterior and interior design images, adjusting scale, cropping, and aligning references.

Learn to create interior ceiling design drawings in plan view and 3D view using AutoCAD, set up layouts, dimensions, and PDF output for a complete ceiling design workflow.

Modify title block information across exterior and interior 3D drawings in AutoCAD, updating drawing and sheet numbers, scale options, and revision data, then place text in layouts and save.

Print all tall drawings together by selecting 1 to 11 layouts, removing unused sheets, and using patch plot to export a single pdf in house project 2D and 3D folder.