Complete AutoCAD 2D&3D From Beginners To Expert Course

Learn to create lines in AutoCAD using the line tool, set start and end points, toggle ortho, and apply polar, relative, and absolute coordinate systems for precise sketches.

Master the absolute coordinate system with origin 0,0, plotting points via x,y values using # syntax to create lines in AutoCAD, including eastings and northings.

Explore how the relative coordinate system in AutoCAD uses the previous point as a reference, with origin 0,0 and enter moves such as 50,0 and -50,0.

Master polar coordinate drawing using origin-based line creation with length and degree syntaxes in AutoCAD, practicing positive (anticlockwise) and negative (clockwise) angles.

Learn to create polylines in AutoCAD, combining lines and arcs, adjusting widths and halfwidths, and using grips, vertex editing, and undo to refine sketches.

Create circles in AutoCAD using center radius, center diameter, two-point, three-point, tan tan radius, and three-tangent-circle methods, with the C shortcut to start and switch between radius and diameter.

Master arc creation in AutoCAD using three-point, start center end, and start center angle methods, with radius, chord length, and angle controls, plus measurement via align and angular tools.

In AutoCAD, use the draw toolbar rectangle tool from origin 0, 0 or a first corner, then set length and width (100, 75 mm) with rotation and area options.

Learn to create polygons in AutoCAD by setting the number of sides, center point, and radius, using inscribed and circumscribed circle options, with Ortho on/off and the POL shortcut.

Learn to create ellipses and elliptical arcs in AutoCAD by selecting center, axis endpoints, and distances, using the EL shortcut, adjusting with grips, and deleting with delete or erase.

Ensure the boundaries are closed, then create hatches in AutoCAD by choosing a pattern and adjusting color, background, transparency, angle, and scale for the target area.

Set an origin in hatch to control where blocks start, using the hatch tool and set origin options—from bottom left to center—with a 0.2 scale and save as default origin.

Explore associative versus non-associative hatch in AutoCAD, showing how associativity links hatch to the sketch so edits update automatically, unlike manual hatch edits.

Master hatch creation in AutoCAD by using outer island detection to confine hatching to chosen areas, with guidance on normal, ignore, and no island options.

Learn to create and manage separate versus combined hatches in AutoCAD using the hatch tool, including the create separate hatches option and remove create separate hatches workflow.

Create a gradient in AutoCAD using the gradient toolbar, selecting patterns, colors, and origin options. Ensure boundaries are closed, adjust colors, and use match properties for a consistent, single-color gradient.

Create a boundary in AutoCAD with the boundary toolbar, using polyline and pick points to outline the area, then view its area and perimeter for 3D modeling.

Practice drawing in AutoCAD by using line commands to create lines at specific lengths and angles with ortho mode and object snap, then apply linear, aligned, and angular dimensions.

Create a spline in AutoCAD using the Draw toolbar, choosing Spline Fit or Spline CV (control vertices). Edit as nurbs with points and switch to SPL.

Create construction lines in AutoCAD using the Draw toolbar, specify points, and apply horizontal, vertical, 45-degree, bisect, and offset options, with ortho on or off and shortcut xl.

Learn how to create a ray in AutoCAD using the draw toolbar, specify the start point, and use the ray shortcut, with ortho on for vertical or horizontal constraints.

Create single and multiple points in AutoCAD using the point tool, specify locations in x and y, and change point types with relative or absolute sizing.

Divide a line into equal segments in AutoCAD using the divide tool, set the number of segments, and reveal the points by adjusting point type with the div shortcut.

Learn to use the measure tool in AutoCAD to divide lines, arcs, and splines into equal 20 mm segments, display the points, and work with millimeter units.

Master wipeout in AutoCAD by drawing a wipeout from a polyline or rectangle to mask areas, adjust frame visibility, and ensure hidden details do not plot.

Master AutoCAD donut creation by setting inner and outer radii, such as 50 mm and 100 mm, or 0 and 50 mm, using the DO shortcut.

Create revision clouds in AutoCAD using rectangular, polygonal, and freehand methods; adjust arc length and variance with REVC; convert objects to revision clouds and modify or erase sides.

Create a 150 mm line, enable polar tracking, and use divide tool to generate six segments. Measure and dimension points with linear dimension, then adjust point types with pt command.

Master the move command in AutoCAD by selecting objects, setting a base point, and placing the second point using coordinates, polar tracking, and osnap options like perpendicular and nearest.

Master copy techniques in AutoCAD by using the copy tool, base point, array and fit options, and paste as blocks across files with ctrl+c, ctrl+v, ctrl+shift+c, and ctrl+shift+v.

Learn to use the AutoCAD stretch tool by selecting with a crossing window or polygon, set a base point, and stretch in any direction. Use ortho on/off with F8 needed.

Learn to use the rotate command in AutoCAD to rotate objects around a base point, control direction with positive or negative angles, and use references and copies for precise positioning.

Learn how to use AutoCAD's mirror tool to create mirrored objects with adjustable mirror lines, erase source object options, ortho settings, and mirror text with MIRRT.

Learn to scale in AutoCAD using the scale tool with a base point and scale factors, copy scaled objects, and use reference length to align dimensions when importing PDFs.

master trimming and extending lines in AutoCAD 2021 and 2022 using the modify tool, the trim command, and the TR shortcut, noting differences from 2020.

Use the trim tool in AutoCAD 2020 and below to trim lines by selecting objects, pressing enter, and applying the fence option or the TR shortcut for quick editing.

Extend lines to the next boundary using the Extend tool in AutoCAD 2021 or 2022. Use crossing, fence, and the Shift key to switch to trim with the EX shortcut.

In AutoCAD 2020 or earlier, extend objects to a boundary, next boundary, or fence using enter, with shift for trim and EX shortcuts.

Learn to use the fillet tool in AutoCAD with a 20 millimeter radius, applying trim or extend modes, handling a polyline, and using the multi option and the FIL shortcut.

Master chamfer creation in AutoCAD by specifying first and second distances, applying to lines or polylines, and using multiple or trim methods to extend to joins.

Master the blend curves tool in AutoCAD to connect two lines or splines with tangential continuity, choosing between fit and control vertices modes.

Master how to create and customize rectangular arrays in AutoCAD, adjusting columns, rows, and distances with the associative option, edit source, base point, and mirror tools.

Create and edit polar arrays in AutoCAD using the modify toolbar, set the center, adjust items and angle, and add rows. Manage associative arrays, edit the source, and replace items.

Create a path array in AutoCAD by selecting objects, choosing a path curve, and adjusting distance, quantity, and rows; explore associative options and post array editing.

Use the erase command in the modify tool to delete objects by selection methods: single, crossing window, or multiple—and confirm with enter, the delete key, or right-click erase; shortcut e.

Master the AutoCAD explode tool to convert blocks, rectangles, and polylines into separate lines by selecting the object and pressing enter.

Master the AutoCAD offset tool by setting distances, selecting sides or through, applying multiple offsets, and using offset gap type for fillet or chamfer effects.

practice drawing in autodesk autoCAD by creating rectangles, applying dimensions, and using move, trim, stretch, circle, and tangent snapping with object snaps and ortho mode.

Master the lengthen tool in AutoCAD to adjust line and arc lengths, angles, and total lengths using delta, percentage, dynamic input, and the LEN shortcut.

Master AutoCAD align tool to arrange geometry by selecting source and destination points, including multi-point alignment with F8 and the align shortcut AL, demonstrated on doors, walls, and furniture.

Learn to edit polylines in AutoCAD by adding, removing, and moving vertices; adjust coordinates, set width, and apply polyedit tools such as close, join, reverse, insert, and tangent.

Master break operations in AutoCAD, including break between two points, break at point, and mid between two points, plus breaking arcs, circles, and splines with the BR shortcut.

Use the join tool in AutoCAD to connect lines and arcs by selecting objects and pressing enter, while ensuring counter clockwise selection and using the J shortcut or blend curves.

Use the reverse tool in AutoCAD to flip directions of lines, polylines, splines, and helix objects; learn to set reverse width with pline reverse width to control arrow direction.

Learn to copy nested objects inside blocks using the copy nested objects tool, select items inside blocks, set a base point, and create multiple copies.

Delete duplicates or overkill in AutoCAD using the modify toolbar Overkill tool; select objects, press enter, and confirm to remove overlapping lines and duplicate objects.

Master AutoCAD draw order to bring text, dimensions, leader lines, and hatches to front or back using bring to front, send back, and the DR shortcut.

Master grip-based editing in AutoCAD to modify lines and polylines by moving, stretching, rotating, mirroring, scaling, and adding vertices, with center and radius controls.

practice drawing in AutoCAD by creating and modifying lines with exact lengths and angles using ortho mode, rotate copy, lengthen, align, measure, and dimension tools to finish a drawing.

Learn to use the status bar and grid in AutoCAD by toggling F7 and setting major and minor line colors. Adjust grid spacing and origin in 2D model space.

Enable grid snap, isometric snap, and polar snap in AutoCAD, adjust grid spacing to 10 mm or 20 units, and set angles at 30°, 45°, or 90° for precise drawing.

Master Ortho mode in AutoCAD using F8 to constrain lines to horizontal or vertical, with polar tracking for inclined lines, and toggle Ortho on/off from the status bar.

Master polar tracking in AutoCAD to snap lines to predefined angles such as 30, 45, 60, and 90 degrees, toggle with F10, and adjust custom angles in tracking settings.

Enable dynamic inputs in AutoCAD from the status bar or customization, switch on with F12, and view line length and circle radius or diameter near the mouse pointer.

Explore object snap (osnap) in AutoCAD to switch on or off snaps such as end point, midpoint, center, geometry center, and more, using F3 to toggle for accurate drawing.

Master AutoCAD object snaps by using shift + right-click to access endpoint, midpoint, centerpoint, and from point. Use temporary track points, mid between points, and 3D Osnap with osnap settings.

Explore Quick Properties in AutoCAD to quickly view and edit circle properties, color, dimensions, center coordinates, linetype, and layer, with guidance on when to use the nearby Properties dialog.

Enable selection cycling in AutoCAD from the status bar to resolve overlapping duplicates, then select the desired arc or circle and adjust its properties.

Enable coordinates in the status bar to display the mouse pointer position as you move, and customize where they appear via the customization menu.

Lock the AutoCAD user interface by using the status bar and customization to enable floating toolbars and panels, then lock docked toolbars and windows to prevent accidental changes.

Toggle clean screen in AutoCAD to maximize workspace by hiding tools via the status bar or Ctrl+0, then restore with Ctrl+0.

Enable line weight in AutoCAD via the status bar or customization, apply a weight to objects like circles, and verify before printing for accurate output.

Learn how to infer constraints in AutoCAD by enabling geometric and dimensional constraints, applying them to rectangles, and adjusting size without changing the original shape.

Set and manage AutoCAD units via the status bar and the UN command, selecting decimal, architectural, engineering, fractional, or scientific options, with metric units or feet and inches.

Master AutoCAD drawing techniques by building a symmetrical two-dimensional figure using lines, arcs, rectangles, circles, fillets, and mirrors, with ortho, object snap, and precise 10 mm gaps.

Measure distance, radius, angle, and coordinates in AutoCAD using the utilities tool, distance tool, and ID point to reveal X, Y, Z values.

Learn multiple methods to measure areas in AutoCAD, including the LI command for area and perimeter of closed objects, and subtracting or adding regions to obtain the outside area.

Explore how the quick measure tool in AutoCAD speeds up floor plan measurements, including length, width, circle radius, and area or perimeter, plus adding areas with shift.

Master quick select in AutoCAD to pick areas or the entire drawing by object type, such as text or polyline; use select similar and Ctrl A to select all.

Access the quick calculator in AutoCAD via utilities to perform calculations and paste results to the command line. Measure distances, insert coordinates, use unit conversions and sin cos tan.

Apply object color in AutoCAD by selecting the object and using properties, true color, color book, or more color options, while routing all color control through layers for clear presentations.

Apply and adjust line weight and transparency in AutoCAD, switching on display of line weight, selecting weights, and checking drafts before printing for consistent darkness.

Explore how to load and apply line types in AutoCAD, adjust line type scale via line type scale input, and use match properties to copy attributes like color across objects.

Master the AutoCAD property palette and list to view and edit object attributes, such as color, layer, line type, geometry coordinates, center point location, radius, diameter, circumference, area, and size.

Learn to create linear dimensions in AutoCAD, select dimension styles and layers, and place horizontal or vertical dimensions using the linear dimension tool or the DLI shortcut.

Create aligned dimensions in AutoCAD by using the Align tool from the Annotate tab, selecting a style and layer, then place extension or center points with the DAL shortcut.

Learn to create angular dimensions in AutoCAD by using the annotate tab's dimension angular tool, selecting lines, circles, arcs, or vertices, and placing the dimension with the DAN shortcut.

Discover how to create arc length dimensions in AutoCAD using the arc length command (DAR), and customize with annotation, dimension style, and layer, then place the dimension inside or outside.

Create a radius dimension in AutoCAD using annotate and dimension, choose arc or circle, place inside or outside, and speed up with the DRA shortcut.

Create a diameter dimension in AutoCAD by using the annotate tab, selecting a dimension style and layer, then placing an arc or circle to show the diameter symbol with ddi.

Create jogged dimensions in AutoCAD 2D using the annotate tab, selecting a dimension style and layer, and using the DJO shortcut to draw jogged lines around circular features.

Master ordinate dimensions in AutoCAD 2D by marking nozzle coordinates from an origin using X and Y directions, and applying the ordinate dimension tool and the DOR shortcut.

Learn how to use dimension continue in AutoCAD to create linear and angular dimensions from the final point of previous dimension, with steps from annotate tab and the DCO shortcut.

Create baseline dimensions in AutoCAD using annotate, set extension lines and baseline spacing, and adjust the dimension style to ensure proper gaps from the baseline.

Modify dimensions in AutoCAD using grips to stretch, move, and place dimension lines and text. Create baseline and continuation dimensions, flip arrows, and adjust angular, radius, and diameter dimensions.

Master the AutoCAD DIM tool to create linear, aligned, angular, arc length, radius, diameter, jogged, and ordinate dimensions. Apply baseline and continue options; use shortcuts R, D, J, A.

Create and customize a new AutoCAD dimension style using the dimension style manager, starting with ISO 25, and adjusting lines, arrows, text, fit, and units.

Modify the dimension style by selecting a style in manage dimension style, then customize lines, symbol, text, units, and color, and set it as the current style for dimensions.

Learn to create and manage dimension style overrides in AutoCAD, set current styles, rename, delete, and apply overrides to dimensions via the annotate tab and dimension toolbar.

Use the Dimension Style Manager to compare two dimension styles and see their differences, then adjust the affected style to avoid difficulties when creating dimensions.

Explore primary and alternate units in AutoCAD dimensions, configure dimension style, precision, decimal separators, and prefixes or suffixes to display feet, inches, and millimeters.

Master creating tolerances in AutoCAD by applying symmetrical, deviation, and limit methods within the dimension style manager, and learn how to view, modify, and add tolerances.

Learn to break and remove crossing dimension and extension lines in AutoCAD using the break command from the annotate tab. Break single and multiple elements and undo with Ctrl+Z.

Adjust the space between dimensions in AutoCAD by using the annotate tab tools, selecting a base dimension, and applying spacing to multiple dimensions, including using the dimspace shortcut.

Learn to add and remove jog lines in AutoCAD dimensions using the annotate tab and the dimension tool, selecting the dimension and jog location to apply or remove.

Learn to add or remove inspection information in AutoCAD dimensioning using the annotate tab and inspect tool, adjust percentage, shape (round, angular, none), center text, and add labels.

Learn to create and apply a new dimension style in AutoCAD, set it as current (D2), and manually update all dimensions using Annotate, Dimension Update.

Reassociate a dimension in AutoCAD by using the Annotate tab, selecting the dimension and new extension points to reattach the start and end points.

Rotate dimension text angle in AutoCAD by selecting the dimension, setting the text angle in the annotate tab, and applying or reverting changes with match properties (MA).

Learn how to justify dimension text in AutoCAD using the annotate tab, selecting left, center, or right justify tools and manually adjusting dimensions.

Create center marks in AutoCAD by using the center mark tool from the annotate tab, applying it to circles or arcs, and customizing color, line type, scale, extension, and rotation.

Create a center line between two lines in AutoCAD using the Centerline tool from the annotate tab, then adjust color, line type, scale, extensions, or use CL shortcut.

Practice drawing in AutoCAD by creating a dimension style with the dimension style manager, then use linear dimensions, radii, and arcs with magenta lines and green text.

Discover how to create a quick leader in AutoCAD, place points and text, and customize the leader via dimension style manager including color, arrow size, and scale.

Master quick leader settings in AutoCAD to control annotation text, leader lines, attachments, frame text, tolerances, and block references, including spline options and GD&T features.

Create multileaders in AutoCAD using leader tools from the home or annotate tab, set arrowhead sizes and text height, and control content and point order.

Explore multileader options in AutoCAD, leader types (straight, spline), landing settings, and content types (none, mtext, block). Learn to create blocks with attributes for block content and three point text.

Learn how to modify multi leaders in AutoCAD, including two-point and three-point leaders, using grips to stretch, add vertex, remove leader, lengthening, and align, collect, and wrap options.

Learn to create and customize a new multileader style in AutoCAD, including leader format, structure, content, text settings, color, line types, and three-point options.

Learn to create datums for a feature control frame (GD&T) using AutoCAD's multi leader tool, defining primary, secondary, and tertiary datums A, B, and C with custom styles.

Create feature control frames in AutoCAD using geometric tolerance symbols, defining position tolerance, datum references (primary, secondary, tertiary), material condition modifiers, tolerance zones, and projected tolerance zones.

Create and customize multi leader styles in AutoCAD, configure leader structure, arrowhead size, color, and content with Mtext and Arial, then apply part numbering using block-based leaders.