AutoCAD 2022 Basic to Advanced हिंदी में

In this lecture we will discuss about AutoCAD user interface Quick Access Toolbar, Ribbon Tabs, Search , External Links , Help, Title Bar, Application Menu Button, Ribbons, File Tabs, Viewport Controls.

The navigation bar is a user interface element where you can access both unified and product-specific navigation tools. Unified navigation tools are those that can be found across many Autodesk products. Product-specific navigation tools are unique to a product

Every point in an AutoCAD drawing file can be identified by its X,Y,Z coordinates. (In 2D drawings, the Z-coordinate value is 0.0.) This system of coordinates is referred to in AutoCAD as the world coordinate system,

The units are used to represent the dimensions in AutoCAD. The units are categorized into length, angle, insertion scale, and lighting. In this lecture we learn about that how we can set display unit and how to use it.

In this lecture we are going to discuss template files. A drawing template file is a drawing file that has been saved with a .dwt file extension, and it specifies the styles, settings, and layouts in a drawing, including title blocks. The default drawing template files are provided as samples

Sets the starting point for the line. Click a point location. With object snaps or grid snap turned on, the points will be placed precisely. You can also enter coordinates. If instead, you press Enter at the prompt, a new line starts from the endpoint of the most recently created line.

To use polar coordinates to specify a point, enter a distance and an angle separated by an angle bracket (<). By default, angles increase in the counterclockwise direction and decrease in the clockwise direction. To specify a clockwise direction, enter a negative value for the angle

In this lecture we will learn how to draw a circle in AutoCAD. In AutoCAD many type of circle are available. We can use it according to our requirements. 

The arc is defined as the smooth curve formed by joining two or more points. The arc of a circle is defined as the portion of the circumference of a circle. By default, the arc is drawn counter-clockwise. We are required to press the Ctrl key to change the direction of the arc in the clockwise. The arc can be drawn by specifying the starting point, center, and the endpoint

The first two points of the ellipse determine the location and length of the first axis. The third point determines the distance between the center of the ellipse and the end point of the second axis.

In this lecture we will learn about how to draw a rectangle in AutoCAD. We can draw rectangle according to its length, width, area and with a rotation angle.

A polygon is a figure formed by the finite number of line segments connected to form a closed circuit. The polygon command is used to create polygons in AutoCAD. We need to specify the number of sides to create a polygon.

A polyline is a connected sequence of line segments created as a single object. You can create straight line segments, arc segments, or a combination of the two.

The spline is a type of line command through which you can make a wavy line for making any type of 2d shape in AutoCAD software.

In AutoCAD, you can make simple points using the POINT or PO command; these points are also called nodes. And you can also make a revision cloud for mark any area.

By Construction lines you can draw Infinite length of line in both direction and by ray command, draw an infinite length of a line only in one direction.

Selection sets means how we can select an object and part of an object for modifies, copy, move and many more function. In AutoCAD we use two type of selection set.

The move command in AutoCAD is used to move objects at a specified distance and direction. We activate move command with M + Enter on our keyboard.The COPY command works similarly to the Move command with the only difference that it leaves a copy of the original object in its position. It works as it would in other windows applications (MS-Office).

The rotate command is used to rotate the object by an absolute angle. It turns objects through the specified point. The specified point is the base point, and the rotation is performed from that point.

The offset command in AutoCAD is used to create parallel lines, concentric circles, and parallel curves. We can offset any object through a point or at a specified distance.

The Mirror command creates a reverse copy of an object in AutoCAD. After you select some objects, AutoCAD prompts you to select two points that define a line about which the objects will be mirrored.

Scale command used for increase the size of an object equally in all direction. You can also drag the cursor to make the object larger or smaller. Creates a copy of the selected objects for scaling. Scales the selected objects based on a reference length and a specified new length.

The Trim command in AutoCAD is used to remove the objects, which meet the edges of other objects. It is used to remove extra lines or extra parts of an object. We can also perform trim using different selection methods

The extend command is used to extend the selected boundaries or edges. The objects are extended so that the edges of other objects can be converged.

Overkill removes duplicate or overlapping lines, arcs, and polylines. Also, combines those that are partially overlapping or contiguous. The erase command is used to remove or delete objects from the drawing. The Explode command allows breaking an object into its component objects.

The Stretch command in AutoCAD is used to stretch the portion of the object. Stretch command work only when you select your object by crossing window. The objects selected individually or completely enclosed by the window selection cannot be stretched.

Break command breaks the selected object between two points. You can create a gap between two specified points on an object, breaking it into two objects.

The Join command in AutoCAD is used to join the objects end to end to create a single object. We can activate Join command by type J + Enter.

A fillet or round connects two objects with a tangent arc in 2D, or creates a rounded transition between the adjacent faces of a 3D solid. An inside corner is called a fillet and an outside corner is called a round; you can create both using the FILLET command.

Chamfer command use for convert any edge into slant line. Sets the chamfer distance from the intersecting point of the selected objects and the XY angle from the first object or line segment.