ArubaOS CX on GNS3 for LABS Emulation

Name: ArubaOS CX on GNS3 for LABS Emulation
Rating: 4.3 (40 reviews)

Run Aruba LABS on GNS3 without the use of real Aruba equipments

Created byMy Network Training

Last updated 7/2021

English

English [Auto],

What you'll learn

Run ArubaOS CX on GNS3 to emulate Aruba LABS

Course content

1 section • 5 lectures • 45m total length

Download the required softwares11:26
Identify and download the essential software to emulate ArubaOS CX labs, including verifying 64-bit support and obtaining GNS3, the GNS3 VM, VMware Workstation Pro, and ArubaOS from Aruba networks.
Install VMmare Workstation Pro, GNS3 VM and GNS3 Emulator13:54
Install VMware Workstation Pro, import the GNS3 VM, and configure the GNS3 emulator to run ArubaOS CX labs, adjusting RAM and licensing as needed.
Install ArubaOS CX on GNS39:15
Learn how to install and import ArubaOS CX into GNS3, set up a virtual lab, and verify operation by launching a router and checking interfaces.
Test LAB - ArubaOS CX on GNS38:07
Connect two ArubaOS CX routers in a GNS3 lab to verify connectivity, configure interfaces with IP addresses, and confirm neighbor relationships and basic emulated network operations.
Bonus Lecture3:03
Explore the network training site to access Cisco, Juniper, MicroTech, Ubiquity, and Aruba courses with bundles, pricing, consultancy options, and contact details.

Requirements

No prerequisites

Description

Aruba Networks is becoming very popular day after day. A lot of companies and network engineers are using Aruba products in their network.

You, as a network engineer, if you want to run an Aruba LAB you require to buy real equipment - This costs a lot of money. Instead, you can use GNS3 emulator software with ArubaOS CX to emulate Aruba Routers/Switches and YES it is free of charge.

In this course, I will show you all steps that you require in order to have ArubaOS running on GNS3 so you can create virtual Aruba Routers/Switches and test any scenario that you wish to test. This would work exactly as you are using real Aruba equipment :)

I will show you what are the softwares that you require to download, then I will show you how to install them and how to import GNS3 VM into GNS3 software, then I will show you how to install ArubaOS on GNS3. When doing that, I will run a LAB and will connect 2 Aruba L3 Switches to each other and try to see if they can see each other.

This is the whole thing that I will do in this course, I hope you will join me so at the end you can run an Aruba emulation on your PC.

Who this course is for:

Anyone interested to run Aruba LABS for multiple routers on 1 PC without the need of purchasing Aruba switches
Students and engineers preparing for the Aruba certification exams