Arduino Projects

* By the end of the "Line Follower Robot" chapter you can make 4 experiments 

1 - Turn on an LED when the color of the object in front of the sensor is white

2 - Control DC (direct current) motor using Motor driver and Arduino.

3 - Make a simple Robot which is basically a robot designed to follow a 'line' or path already predetermined by the user.

* Clarify the block diagram of Line Follower Robot project

The required component to build this project:

Line follower sensor - Arduino “Nano”  - Motor driver (L293) - Breadboard - Wires - Battery - Robot Car

is white.

(get a better understanding about the difference between temperature sensor in ch1 and line follower sensor and how to work with different type of sensors)

* Control Direct current motors using a motor driver (L293) and Arduino 

* Write the code and make the connections between Arduino and Motor driver so robot car can move forward for 1 second and move backward for 1 second

let's make the line follower robot by integrating the whole components together the sensor,Arduino motor drive and robot car

* By the end of the "Smart Robot" chapter you can make 2 experiments 

1 - Turn on and off an LED using the Smartphone and Bluetooth Module (HC-05) .

2 - Write the code to control the robot car using the Smartphone and Bluetooth model.

* Clarify the block diagram of Smart Robot project

The required component to build this project:

Bluetooth module (HC-05) - Arduino “Nano”  - Motor driver (L293) - Breadboard - Wires - Battery - Robot Car

1 - make the connections between the Bluetooth Module and Arduino

2 - Write the code to turn on the LED when we press on Forward button on the Smartphone

Control the robot car using the Smartphone and Bluetooth model.

Connect the Android phone with Arduino gives you the ability to make a lot of cool projects

let's check some of the projects that will be clarified in that chapter:

1 - Turning on and off the lighting of your room using the Android phone.

2 - send a short message to your mobile when the temperature exceeds a certain limit.

3 - turn on and off the light of your room with your voice.

Can you turn on and off the lighting of your room using your Smartphone? Yes you can and that's what we gonna talk about in that tutorial

Did you think how to send a short message to your mobile phone when the temperature exceeds certain limit?

In that tutorial I'll show you how to make that project ;)

Use the android mobiles internal voice recognition to send commands to the Arduino board via the Bluetooth module so you can turn on and off the lighting, fan any 220V load using your voice

- First of all we learn how to control Servo motor using Arduino

- How to measure the distance of the  object in front of the robot using Ultrasonic sensor

- How to use functions in programming to make the code organized

- Finally how to integrate the whole component together  the Ultrasonic sensor – Servo motor  and robot car to make the Obstacle Avoidance Robot

- Servo motors give us the ability to turn to a specified position.

- They have a servo arm that can turn 180 degrees. Using the Arduino, we can tell a servo to go to a specified position.

We gonna use the Ultrasonic sensor to determine whether there is an object in front of the robot or not

The typical case for creating a function is when one needs to perform the same action multiple times in a program. Functions also help the programmer stay organized.

let's integrate that whole component to make the Obstacle avoiding Robot

Most common manufacturing robot is the Robotic Arm, which is a programmable mechanical arm that perform the same function or similar to the human arm in that chapter we gonna make a robot arm

---------------------------------

The music used in that chapter is "bensound-dream " from Bensound.com"

Calibrate servo motors to make sure that the robot arm mechanism will work in a perfect way

After servo motors calibration we are ready to assemble the robot arm. Let's get started assembling the base and left side of the robot arm

We are assembling the robot arm. We have done assembling the base and the left side . let's assemble the right side and build the middle of the robot arm

let's attach the left side of the robot arm and the middle together

let's attach the right side of the robot arm and the middle together

let's attach the left and right side forearm to the robot arm

let's build the gripper and attach it to the robot arm

As we mentioned before you can't power on more than one servo motor using Arduino board so we have to use a voltage regulator 7805 to supply +5V to servo motors

We done assembling the robot arm and we supply power to servo motors with the voltage regulator 7805 let's write the code the control the robot Arm with Arduino board

DIY Makey Makey with Arduino Leonardo board and let's play Games ;)

---------------------------------

The music used in that tutorial is "bensound-dream " from Bensound.com"

you have made over 20 innovative project like controlling light and a robot car with your Smartphone make a robot Arm a lot of innovative projects why didn't teach kids and adults in country how to make that projects teach them how technology works

let's talk about how to start your career as a freelancer robot instructor for kids

first of all let's talk about the business model which the basic 9 building blocks that will organize the work process

The best business module for Robot and programming courses is Freemium business model

It's important question to answer: how much money will you pay to test whether that will be a profitable business in your country or not ?

let's get started and make the first step in promoting the robot for kids course with the Facebook advertisement