Ansys Maxwell Made Easy: A Step-by-Step Beginner's Guide

In this section, we will introduce the key concepts of Ansys Maxwell magnetic simulations, covering what you will learn throughout the course. We will also showcase sample simulations to provide a clear understanding of the tools and capabilities available in Ansys Maxwell.

This section outlines the initial steps of setting up a simulation in Ansys Maxwell. We will guide you through the process of starting a simulation, including how to navigate the software interface and set up the simulation environment, preparing you for successful outcomes.

Here, we will explore the differences between 2D and 3D simulations in Ansys Maxwell. You will learn how to decide which simulation type to use based on the complexity of your model and the specific requirements of your project, helping you optimize your simulation.

This section explains the various solution types available in Ansys Maxwell, including magnetostatic, eddy current, and transient simulations. You will understand the differences and know when to choose each solution type based on the nature of the physical phenomena being modeled.

In the final section, we will cover how to draw the geometry of your simulation model. You will learn how to accurately define and create the geometrical shapes required for the simulation, ensuring that your model is ready for analysis and results generation.

Learn how to assign materials to different parts of your simulation and customize their properties for accurate modeling. We’ll explore material libraries, define key parameters like permeability and conductivity, and modify them to match real-world scenarios.

Understand the importance of boundary conditions in simulations. This lecture demonstrates how to assign appropriate boundaries to your model to ensure accurate and reliable results.

Understand the importance of excitation in electromagnetic simulations. This lecture covers step-by-step methods to apply voltage, current, and external circuit excitations to your models for accurate analysis.

Discover how to define parameters for calculating forces and torque. This lecture explains the setup required for obtaining mechanical outputs from your electromagnetic simulations.

A balance between accuracy and simulation time. mesh generation and solution setup. Learn how to create an efficient mesh for your model, refine it for accuracy, and configure solver settings to optimize simulation performance.

Run simulations and explore how to extract a variety of results, including magnetic flux density, field intensity, and losses. Learn to visualize and interpret data effectively to gain insights into your design.

This video explains the key differences between 2D and 3D simulation in ANSYS Maxwell. It focuses on how the setup and analysis change when moving from 2D to 3D. Other important aspects of 3D simulation, such as meshing, boundary conditions, and result analysis, are the same for 2D and 3D.

In this video, you’ll learn how to properly set up core loss and eddy effect in ANSYS Maxwell. We’ll cover the key differences between these two settings, when each one should be applied, and how they influence your simulation results. By the end, you’ll understand in which type of project—such as transformers, motors, or other electromagnetic devices—you need to activate core loss, eddy effect, or both, to achieve accurate and reliable results.