ANSYS Workbench Tutorials Part-V

Name: ANSYS Workbench Tutorials Part-V
Rating: 4.8 (2 reviews)

Learn simulation and analysis of various components using ANSYS Workbench

Created bySamanwita Bagg

Last updated 11/2023

English

What you'll learn

Design in ANSYS Workbench
Static Structural Analysis
Steady-State Thermal Analysis
Thermal-Structural Coupled Analysis
Modal Analysis
Buckling Analysis
Transient Thermal Analysis
Topology Optimization

Course content

9 sections • 49 lectures • 7h 46m total length

Exhaust Valve8:29
This video explains how to design an Exhaust Valve of I.C. Engine using Design Modeler of ANSYS Workbench.
Wash Basin6:30
This video explains how to design a Wash Basin using Design Modeler of ANSYS Workbench.
Disc Brake Rotor Design-I8:58
This video shows how to design a DISC BRAKE ROTOR using DESIGN MODELER of ANSYS Workbench. This is Design-I. Second Design will follow in the next video.
Disc Brake Rotor Design-II11:26
This video shows how to design a DISC BRAKE ROTOR using DESIGN MODELER of ANSYS Workbench. This is Design-II of disc brake rotor.
Piston Ring5:32
This video shows how to design a PISTON RING using DESIGN MODELER of ANSYS Workbench.
E Clip9:32
This video shows how to design an E CLIP using DESIGN MODELER of ANSYS Workbench.
External Retaining Ring8:32
This video shows how to design an EXTERNAL RETAINING RING using DESIGN MODELER of ANSYS Workbench.
Internal Retaining Ring8:04
This video shows how to design an INTERNAL RETAINING RING using DESIGN MODELER of ANSYS Workbench.
Piston or Gudgeon or Wrist Pin3:49
This video shows how to design a GUDGEON PIN OR PISTON PIN OR WRIST PIN using DESIGN MODELER of ANSYS Workbench.

Hydrostatic Pressure on Curved Surface22:28
This video shows how to apply hydrostatic pressure load in Ansys mechanical using STATIC STRUCTURAL module of ANSYS Workbench. Here we will study the effect of hydrostatic pressure on an appratus of Fluid Mechanics Lab which helps determine Hydrostatic Pressure on Curved Surface.
Exhaust Valve10:25
This video shows how to analyze an EXHAUST VALVE for deformation, stress, strain and safety factor using STATIC STRUCTURAL module of ANSYS Workbench.
Wash Basin12:36
This video shows how to analyze a WASH BASIN for deformation, stress, strain and safety factor using STATIC STRUCTURAL module of ANSYS Workbench.
Disc Brake Rotor Design-I7:32
This video shows how to analyze a DISC BRAKE ROTOR for deformation, stress, strain, fatigue and safety factor using STATIC STRUCTURAL module of ANSYS Workbench.
Disc Brake Rotor Design-II8:17
This video shows how to analyze a DISC BRAKE ROTOR for deformation, stress, strain, fatigue and safety factor using STATIC STRUCTURAL module of ANSYS Workbench.
Piston Head11:18
This video shows how to analyze a PISTON HEAD for deformation, stress, strain, safety factor, fatigue and life using STATIC STRUCTURAL module of ANSYS Workbench.
Piston Ring10:06
This video shows how to analyze a PISTON RING for deformation, stress, strain and safety factor using STATIC STRUCTURAL module of ANSYS Workbench.
Snap Ring10:24
This video shows how to analyze a SNAP RING for deformation, stress, strain and safety factor using STATIC STRUCTURAL module of ANSYS Workbench.
Piston Assembly8:49
This video shows how to analyze a PISTON ASSEMBLY for deformation, stress, strain, FATIGUE and safety factor using STATIC STRUCTURAL module of ANSYS Workbench.
Piston or Gudgeon or Wrist Pin9:14
This video shows how to analyze a PISTON OR GUDGEON OR WRIST PIN for deformation, stress, strain, FATIGUE and safety factor using STATIC STRUCTURAL module of ANSYS Workbench.

Exhaust Valve11:54
This video shows how to analyze an EXHAUST VALVE for temperature and total heat flux using STEADY STATE THERMAL module of ANSYS Workbench.
Wash Basin7:34
This video shows how to analyze a WASH BASIN for temperature and total heat flux using STEADY STATE THERMAL module of ANSYS Workbench.
Disc Brake Rotor Design-I9:07
This video shows how to analyze a DISC BRAKE ROTOR for temperature, total heat flux and directional heat flux using STEADY STATE THERMAL module of ANSYS Workbench.
Disc Brake Rotor Design-II12:39
This video shows how to analyze a DISC BRAKE ROTOR for temperature, total heat flux and directional heat flux using STEADY STATE THERMAL module of ANSYS Workbench.
Piston Head8:35
This video shows how to analyze a PISTON HEAD for temperature, total heat flux and directional heat flux using STEADY STATE THERMAL module of ANSYS Workbench.
Piston Ring6:46
This video shows how to analyze a PISTON RING for temperature, total heat flux and directional heat flux using STEADY STATE THERMAL module of ANSYS Workbench.
Connecting Rod8:43
This video shows how to analyze a CONNECTING ROD for temperature, total heat flux and directional heat flux using STEADY STATE THERMAL module of ANSYS Workbench.
Snap Ring8:36
This video shows how to analyze a SNAP RING for temperature, total heat flux and directional heat flux using STEADY STATE THERMAL module of ANSYS Workbench.
Piston Assembly9:17
This video shows how to analyze a PISTON ASSEMBLY for temperature, total heat flux and directional heat flux using STEADY STATE THERMAL module of ANSYS Workbench.
Piston or Gudgeon or Wrist Pin5:10
This video shows how to analyze a PISTON OR GUDGEON OR WRIST PIN for temperature, total heat flux and directional heat flux using STEADY STATE THERMAL module of ANSYS Workbench.

Disc Brake Rotor7:28
This video shows how to analyze a DISC BRAKE ROTOR for Structural and Thermal Coupled Analysis which include deformation, stress, strain, safety factor using STATIC STRUCTURAL and temperature, heat flux using STEADY STATE THERMAL modules of ANSYS Workbench.
Piston Head12:34
This video shows how to analyze a PISTON HEAD for Structural and Thermal Coupled Analysis which include deformation, stress, strain, safety factor using STATIC STRUCTURAL and temperature, heat flux using STEADY STATE THERMAL modules of ANSYS Workbench.
Snap Ring11:19
This video shows how to analyze a SNAP RING for Structural and Thermal Coupled Analysis which include deformation, stress, strain, safety factor using STATIC STRUCTURAL and temperature, heat flux using STEADY STATE THERMAL modules of ANSYS Workbench.
Piston Assembly11:02
This video shows how to analyze a PISTON ASSEMBLY for Structural and Thermal Coupled Analysis which include deformation, stress, strain, safety factor using STATIC STRUCTURAL and temperature, heat flux using STEADY STATE THERMAL modules of ANSYS Workbench.

Exhaust Valve7:45
This video shows how to analyze a EXHAUST VALVE for total deformation for various mode frequencies using MODAL module of ANSYS Workbench.
Disc Brake Rotor Design-I12:33
This video shows how to analyze a DISC BRAKE ROTOR for total deformation for various mode frequencies using MODAL module of ANSYS Workbench.
Disc Brake Rotor Design-II8:12
This video shows how to analyze a DISC BRAKE ROTOR for total deformation for various mode frequencies using MODAL module of ANSYS Workbench.
Connecting Rod13:01
This video shows how to analyze a CONNECTING ROD for total deformation for various mode frequencies using MODAL module of ANSYS Workbench.
Piston Ring8:44
This video shows how to analyze a PISTON RING for total deformation for various mode frequencies using MODAL module of ANSYS Workbench.
Piston Head12:39
This video shows how to analyze a PISTON HEAD for total deformation for various mode frequencies using MODAL module of ANSYS Workbench.
Snap Ring8:04
This video shows how to analyze a SNAP RING for total deformation for various mode frequencies using MODAL module of ANSYS Workbench.
Piston Assembly8:41
This video shows how to analyze a PISTON ASSEMBLY for total deformation for various mode frequencies using MODAL module of ANSYS Workbench.
Piston or Gudgeon or Wrist Pin10:57
This video shows how to analyze a PISTON OR GUDGEON OR WRIST PIN for total deformation for various mode frequencies using MODAL module of ANSYS Workbench.

Disc Brake Rotor14:19
This video shows how to analyze a DISC BRAKE ROTOR for temperature, total heat flux and directional heat flux using TRANSIENT THERMAL module of ANSYS Workbench. Further the load is imported in STATIC STRUCTURAL module and analysed.
Piston Head10:31
This video shows how to analyze a PISTON HEAD for temperature, total heat flux and directional heat flux using TRANSIENT THERMAL module of ANSYS Workbench.
Piston Assembly10:20
This video shows how to analyze a PISTON ASSEMBLY for temperature, total heat flux and directional heat flux using TRANSIENT THERMAL module of ANSYS Workbench.
Piston or Gudgeon or Wrist Pin8:40
This video shows how to analyze a PISTON OR GUDGEON OR WRIST PIN for temperature, total heat flux and directional heat flux using TRANSIENT THERMAL module of ANSYS Workbench. Further the load is imported in STATIC STRUCTURAL module and analysed.

Requirements

Basics knowledge of Engineering subjects
Knowledge of numerical method of FEA

Description

This course is the fifth part of the lecture series on ANSYS Workbench software. It takes you through various modules of ANSYS Workbench like Design in ANSYS Workbench, Static Structural, Steady-State Thermal, Thermal-Structural Coupled, Modal, Buckling, Transient Thermal and Topology Optimization Analysis. Various numerical are solved to explain various concepts and features of the software and for practice so that expertise can be gained in handling the software.

We start with Design in ANSYS Workbench which explains how to draw basic geometry using Design Modeler.

Second section deals with Static Structural Analysis. Here we analyze in ANSYS Workbench like Exhaust Valve, Wash Basin, Disc Brake Rotor Design I and II, Piston Head, Piston Ring, Snap Ring, Piston Assembly and Gudgeon Pin.

Third section is all about the Steady-State Thermal Analysis. Various numericals are solved for like Exhaust Valve, Wash Basin, Disc Brake Rotor Design I and II, Piston Head, Piston Ring, Connecting Rod, Snap Ring, Piston Assembly and Gudgeon Pin.

Fourth section deals with Thermal-Structural Coupled Analysis of Disc Brake Rotor, Piston Head, Snap Ring and Piston Assembly. The procedure for solving such type of problem is explained.

Fifth section deals with Modal Analysis of Exhaust Valve, Wash Basin, Disc Brake Rotor Design I and II, Piston Head, Piston Ring, Snap Ring, Connecting Rod and Gudgeon Pin.

Sixth section deals with Buckling Analysis of Connecting Rod.

Seventh section deals with Transient Thermal Analysis of Disc Brake Rotor, Piston Head and Gudgeon Pin.

Last section deals with Topology Optimisation of Disc Brake Rotor.

Basic version of this course is available in the previous part of this series ANSYS Workbench Tutorials. Advanced version of the courses are also available namely, Advanced Structural Analysis, ANSYS Workbench Tutorials Part-II, ANSYS Workbench Tutorials Part-III and ANSYS Workbench Tutorials Part-IV. Join those course to learn the basic concepts of these modules and more.

Who this course is for:

Designers
Engineering Students(Undergraduate, Master and Ph.D.)
Consultants

ANSYS Workbench Tutorials Part-V

What you'll learn

Explore related topics

Course content

Design in ANSYS Workbench9 lectures • 1hr 11min

Static Structural Analysis10 lectures • 1hr 51min

Steady- State Thermal Analysis10 lectures • 1hr 28min

Thermal-Structural Coupled Analysis4 lectures • 42min

Modal Analysis9 lectures • 1hr 31min

Buckling Analysis1 lecture • 11min

Transient Thermal Analysis4 lectures • 44min

Topology Optimisation1 lecture • 8min

Bonus Resource1 lecture • 1min

Requirements

Description

Who this course is for: