
In this lecture we will be going over the course as a whole. What all we will cover, where quizzes will becoming from and have a first look into the FARs.
In this section will be going over the TABLE of CONTENT and identify sections we will be covering in this course. Online FAR books are acceptable for this class however I highly recommend getting a physical book. When you take your O&P for your licence you WILL NOT be able to use ebooks. Learning to navigate the paper book is ESSENTIAL.
In this section will be going over important definitions and abbreviations covered under 14 CFR Subchapter A Part 1.
In this document is the review for your practice test over Part 1 of the FAR. This is to show you how the review sections will be formulated.
The required reading section will all be like this section here. All paragraph we will be discusing that section will be linked here.
In this lecture we will go over several example of how to reference and follow a reference in the FAR.
This PDF file is a review for part 3 and how to reference your 14 CFR (AMT FAR) book. There are three more examples in preparation for your first quiz.
This article contains all the required reading necessary to understand the following lectures in this section. Please take the time to read as we will only be going over these in the lectures. Also in the article is a link to a website in which you can read yourself if you do not own a copy. Although it is not required for these lectures, I strongly urge you buy a copy of the FARs for yourself as you cannot use electronic editions of the FARs during the O&P test to get your rating in airframe and/or powerplant.
In this lecture we will be going over the applicability of Part 65
In this lecture we will be going over the 65.11 application and issue.
In this lecture will be going over;
In this lecture, we will be going over;
In this lecture will be going over;
This PDF file is a review for part 65 Subpart A - General
This article contains all the required reading necessary to understand the following lectures in this section. Please take the time to read as we will only be going over these in the lectures. Also in the article is a link to a website in which you can read yourself if you do not own a copy. Although it is not required for these lectures, I strongly urge you buy a copy of the FARs for yourself as you cannot use electronic editions of the FARs during the O&P test to get your rating in airframe and/or powerplant.
In this lecture will be going over 65.71. Eligibility requirements: Gen, 65.73 ratings, 65.75 knowledge requirements, 65.77 experience requirements and 65.79 skill requirements
In this lecture will be discussing 65.80 certificated aviation maintenance technician school students.
In this lecture will be discussing that aviation maintenance technician schools certified under part 147 and their students .
In this lecture, we will be discussing 65.81 general privileges and limitations.
We will discuss the privileges and limitations that you as a certified mechanic will have under this part.
In this lecture, we will be discussing 65.83 recent experiences.
We will discuss what a certified mechanic must do in order to retain the privileges of his rating.
65.85 airframe rating; additional privileges and 65.87 powerplant rating; additional privileges.
We will be discussing the additional privileges provided by the airfame and powerplant ratings granted under this part.
In this lecture will be discussing 65.89 display of certificates.
This PDF file is a review for part 65 Subpart D - Mechanics
This article contains all the required reading necessary to understand the following lectures in this section. Please take the time to read as we will only be going over these in the lectures. Also in the article is a link to a website in which you can read yourself if you do not own a copy. Although it is not required for these lectures, I strongly urge you buy a copy of the FARs for yourself as you cannot use electronic editions of the FARs during the O&P test to get your rating in airframe and/or powerplant.
We will be going over 65.91 inspection authorization in this lecture, 65.92 inspection authorization: duration in this lecture, 65.93 inspection authorization: renewal in this lecture and finaly 65.95 inspection authorization: privileges and limitations.
In this lecture, we will be starting, subpart E Repairman. Starting with 65.101 eligibility requirements: general. Then we will be moving on to 65.103 repair man certificate: privileges and limitations. Finally ending with 65.107 repair man certificate (light sport aircraft): eligibility, privileges, and limits.
In this short lecture I will introduce Part 39 the next subject we will be covering in this course.
This article contains all the required reading necessary to understand the following lectures in this section. Please take the time to read as we will only be going over these in the lectures. Also in the article is a link to a website in which you can read yourself if you do not own a copy. Although it is not required for these lectures, I strongly urge you buy a copy of the FARs for yourself as you cannot use electronic editions of the FARs during the O&P test to get your rating in airframe and/or powerplant.
In this lecture will be taking our first look at 14 CFR subchapter C aircraft part 39 airworthiness directives. In this first lecture will be going over 39.1 purpose of this regulation, 39.3 definition of airworthiness directives, and 39.5 when does FAA issue airworthiness directives?
We will be taking a look at 39.7 — What is the legal effect of failing to comply with an airworthiness directive, 39.9 — What if I operate an aircraft or use a product that does not meet the requirements of an airworthiness directive, 39.11 — What actions do airworthiness directives require?
In this lecture we will discuss the final few paragraphs in this Part to finish out our lectures.
Aircraft Maintenance Technology is a large field with many opportunities inside and even outside of aviation. It is no wonder that many people want to get their Airframe and/or Powerplant rating (A&P) and begin working in this ever growing field.
If you are attending a school certified under part 147 and just need a refresher before taking your written and O&P.
or
You were a mechanic in the military and you want to work on civilian aircraft as an FAA certified A&P. You will need to know your Federal Aviation Regulation (FAR).
In this course we will be going over many topics you will need to know to navigate the Title 14 CFRs and aid you in passing your A&P licencing tests. You will know key terms, the dispensation of documents, your privileges and limitation under your rating, major and minor repairs and alterations along with many other important topics.
The course will be structured with lectures and Powerpoints over section in the FAR AMT book. Students will also be expected to do some independent reading. The FAR AMT book is required for this course and is a book I recommend keeping throughout your career.
The course will include several quizzes from the that will require your FAR AMT book to answer.
*** Update***
This course is a work in progress with new Parts on the way. In the coming weeks expect to see Parts 39 Airworthiness Directives and Part 43 Maintenance, Preventive Maintenance, Rebuilding, and Alteration. We will also take a step back from the Title 14 CFR and explore FAA.GOV and how to find important documentation you will have to be familiar with.
***Note***
Please note that this course is over the Federal Aviation Regulation (FAR) more specifically the Title 14 Code of Federal Regulations. This book governs the Federal Aviation Administration and sets the privileges and limitations of Aircraft Maintenance Technicians and Repairmen in the UNITED STATES (US) or United states based Air Carriers.
This course WILL NOT cover the technical (Hands On) side of Aircraft Maintenance and should be viewed as a study aid or exposure course to the FAR.
***Update 2020***
This Course will be getting a 2020 update on all Title 14 code of Federal Regulation changes made since the origanal publication date of this course. This will also add addition resourses including a look into the AC 43.13-1B - Acceptable Methods, Techniques, and Practices.