BIM- Revit Concrete Structure- Full Course

Model site preparation and excavation in Revit by linking cad files, setting cm units, creating foundation and excavation levels, topography, building pads, and grid visibility for lod 400 concrete structure.

Learn foundation modeling in Revit by creating lean concrete footing, building pads, and foundation walls, setting base constraints and offsets, and detailing an elevator shaft foundation with slabs.

Detail foundation reinforcement by placing lateral and longitudinal rebars in Revit, verify covers of 7.5 cm, and handle overlaps, hooks, and spacing for different foundation thickness.

Demonstrate foundation reinforcement detailing in revit by modeling inclined and bent rebars, placing longitudinal and transverse bars, applying overlaps and spacing, and validating alignment via section views.

Model concrete spacers as bim families in Revit (lod 400), aligning rebars, setting parameters for cover and spacer diameter, and importing into project for accurate scheduling.

Model elevator pit and pad footing in Revit, detailing spacers and rebars, creating trusses, adjusting covers, and connecting the shaft to the foundation.

Edit spacer geometry and size by rebar diameter, then define construction phases: excavation, reinforcement, molding, concrete casting for foundation execution in Revit.

Model ground floor columns in Revit using a single 45x45 cm type with 20 mm rebar, stirrups, and link reinforcement, propagating from foundation through levels.

Detail column reinforcement in Revit for LOD 400, placing bottom, middle, and top stirrups with specified spacing and diameter, then add hooks and link reinforcements connected to the foundation.

Adjust the manage phase order to model level one column reinforcement, concrete casting, and molding of column formwork, then create and schedule the mold in the project.

Master parametric formwork components for column molds in Revit by modeling extrusion details, holes, and arrays, assign materials, and manage visibility and phases for accurate LOD 400 concrete detailing.

Demonstrates modeling primary concrete beams in Revit, creating 45x45 main beams, spanning from column to column, and detailing rebar, stirrups, and section views with phasing and underlay.

Master modeling secondary and strengthening beams in revit by detailing reinforcement, armatures, spacers, and concrete casting for level one girders and columns, with phase and mold management.

Model concrete joists and beams in Revit, add panels and molds, assign phases, and reinforce armatures through a parametric workflow.

Explore parametric concrete joist beam modeling in Revit for lod 400, including reference planes, offsets, bar layouts (inclined, torsion, longitudinal), and rusted-iron materials and visualization.

Model polystyrene blocks in revit slabs for lod 400 concrete structure modeling using parameter-driven families, aligning armatures, and integrating styrofoam with concrete joists to advance bim modeling efficiency.

Model a protective concrete cover and structural detailing in Revit by creating a concrete joist under polystyrene, adding chamfer and fillet, and parameterizing styrofoam spacing and visibility.

Explore Revit slab detailing for joist and deck components, creating styrofoam spacers, reference planes, and parameters to control empty spaces, cuts, and visibility in 3d and section views.

Model concrete staircase in Revit by detailing the structural elements, including monolithic stairs, treads, risers, landings, half level beams, and reinforcement with rebars and stirrups, aligned to blueprints.

Master advanced slab reinforcement in Revit by casting level one concrete, cutting Styrofoam voids to control volume, and detailing thermal rebar patterns, joists, and base plate connections.

Learn step-by-step beam formwork modeling in Revit by creating adjustable concrete beam molds, applying retaining structures, and generating schedules for mold quantities, volume, and area.

Model adjustable retaining structures and jacks for concrete beams in Revit at LOD 400, using parametric families, voids, and spacing controls to drive height, spacing, and jack counts.

Model and place parametric beam formwork in a Revit project for lod 400 structure modeling, using reusable molds and jacks with visibility-controlled, extra left and right faces to fill gaps.

Model stair formwork in revit by creating adjustable face-based molds for stairs, landing, and ramps, using shared parameters to compute area in schedules and assign wooden mold material.

Explore staircase formwork details in Revit by building BIM parametric families for jacks, voids, and cuts; adjust heights with dedicated parameters, mirror components, and update schedule tables for concrete molding.

Master efficient modeling of repetitive concrete elements by copying and placing columns and beams across levels, adjusting reinforcement and offset, and aligning rebars to blueprints for multi-floor projects.

Model elevator shaft steel framing in Revit using foundation and excavation levels, placing base plates, anchor bolts, L-angle columns, C-channels, and U-shaped members with precise spacing and mirroring.

Model concrete slabs for structural floors in Revit, detailing 150 mm slabs with rebar layouts, hooks, covers, and spacing, and replicate across levels including balconies.

Learn to create bar bending schedules in Revit 2024, automatically extracting reinforcement shapes for columns and foundations, and perform length, weight, and quantity takeoffs for project sheets.

Model guard structures and temporary supports in Revit using piles, base plates, bolts, cross braces, L angles, and connections, guided by excavation sections, blueprints, and phasing demolition considerations.

Learn to craft professional bim presentations by exporting show-ready sheets and templates in Revit, applying standardized view templates, color schemes, and 2d/3d section visuals for a distinct personal brand.