Learn Control Builder / Automation Builder Software PLC

Explore the basics and history of automation, and how PLCs control processes. Observe how sensors, pumps, and valves maintain setpoints like 70 percent.

Learn ladder diagram LD programming using normally open NO and normally closed NC contacts with coil outputs, and understand left-to-right inputs and outputs rules.

Install ABB plc software by downloading control builder plus via google drive link, extract with winrar using the password PLC 247.com, and run setup to install opc server for codices.

Create a new ABB plc project in control builder plus, configure on-board and expansion io, set digital and analog addresses (i, q, mw, md), then test ladder logic in simulation.

Learn to configure ABB PLC timers in Control Builder Plus, including on-delay, off-delay, and pulse timers, using timer blocks, inputs, outputs, and memory addresses.

Learn to create user defined function blocks in ABB plc control builder plus, define input and output pins, and call subpages (subroutines) from the main page.

Abb plc automated sorting machine uses color, photoelectric, and inductive sensors to classify items into metal, plastic, or other bins, controlled by pneumatic cylinders and start/stop memory logic.

Create an ABB AC 500 control builder plus project, connect via ethernet, configure the controller IP address and system IP, test with ping, and download the program.

Explore ABB plc scaling function to map 4 to 20 milliamps inputs into meaningful units like liters or percentage, by configuring input/output ranges and converting to real in FBD.

Develop a functional block diagram program on ABB plc by wiring inputs and outputs, using parallel and series gates, on-delay timers, and assign to control load.

Learn to build a control program in FBD language with ABB PLC Control Builder Plus, sequencing red, yellow, and green lamps via memory bits M1–M3 and five-second delays using start/stop.

ABB PLC Control Builder Plus visualization-part 1 demonstrates creating a visualization page, adding start and stop buttons, and showing red, yellow, and green lamp indicators for a traffic light program.

Learn to use control builder plus box with EN to configure bit string logic blocks (and/or/xor/not/nand), arithmetic, comparators, selection, bit shift, and type conversion in online mode.