Udemy
    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
Subscribe
Turn what you know into an opportunity and reach millions around the world.
Learn More
Your cart is empty.
Keep shopping
3D Epoxy Design And Installation
Rating: 4.4 out of 5(45 ratings)
210 students

3D Epoxy Design And Installation

Epoxy resin, Epoxy Installation,3D Wallpapers Designs
Created byBidex Owel
Last updated 5/2025
English

What you'll learn

  • In this course will discuss in detail the following: Epoxy floor Installation Graphic wall Installation Flakes Or reflective installation be able to
  • Installation Five different stages necessary for epoxy installation How to measure like a pro How to calculate amount of chemical use for a project
  • way to your clients You will learn how to mix, how to add colours, pigments, giltters, pebbles and give you work glassy effect. Get to know tools
  • We will also spend an entire section focused solely on practicals. You will see how epoxy installation of different designs are done step by step.
  • Where you will also have privilege to show me your own work. Finally, you will have an opportunity to take different Installation quiz to help you
  • determine if you remember what you have learnt. Let's Dive- in, Are You Ready!!!

Course content

4 sections • 17 lectures • 1h 38m total length

  • Course Introduction1:37

    This lesson discusses what you will learn at the end of this course, which includes:

    3D floor Installation

    Graphic Ceiling Installation

    Flask Or Reflective Installation

    Metallic Installation

    And many more...


  • Tools Needed For Installation7:34

    This course discussed in detail most common tools needed for installation.

    Also mentioned the major materials you need to have, so that  will not need to spend alot on tools that are not important especially as as a beginner.

  • Get To Know Your Chemicals5:05

    This lesson discusses the two major chemicals we use for installation:

    1. Resin also called epoxy

    2. Harder

    Term used in d lesson

    Cure resin This is when the mixture (resin and harder) become very sticky and difficult to be able to spread on the surface of the project.

    Pot time This is the time you have to work with the mixture before it starts to cure.


  • Preparation of base5:15

    In this lesson will mention 5 different stages of Installation

    • Preparation of Base

    • Priming

    • Colour Top Coat

    • SAV

    • Transparent Top Coat            And will discuss mainly the first stage . Will learn how you can prepare your base on the floor, wall and on my  ceiling.

  • Priming Stage2:26

    This lesson discusses what is priming, and how it can done during installation.

  • Colour Top Coat And SAV Vinyl8:28

    At the end of this lesson you will learn how colour top coat is done during installation.

    How to download the graphic designs on the SAV, print and finally, how to install it either on the floor, wall or on the ceiling.

  • Transparent Top Coat4:09

    In this lesson you will learn the last stage in epoxy installation, called transparent top coat(TTC).

    This stage is very important, and  must be properly done because that is the stage that determine the outcome or result of the Installation.

Requirements

  • Large canvas, wood panel, epoxy resin, glitter, acrylic paints or colour pigments, your favorite printed image(SAV Vinyl),small brushes,
  • paint roller, stick mixer(wooden or plastic,or silicon) Measuring scale, disposable transparent cups, sand paper and measuring tape.

Description

This course is 4 days course that discusses how epoxy designs and installations are done step by step, using the latest Installation methods. Easy to understand even if you don't have any knowledge about Installation before.


We will practice together how to install the following:

Epoxy floor Installation


Graphic wall Installation


Flakes Or reflective installation


Metallic ceiling or floor Installation


Five different stages necessary for epoxy installation


How to measure like a pro


How to calculate amount of chemical use for a project


Profitable way to charge your clients


You will learn how to mix, how to add colours, pigments, giltters, pebbles to the components and what to do to give you work sparkling and beautiful effect.


Get to know exactly tools and materials needed for installation without waisting too much money on materials that are not necessary.


You will also learn in details not only how to measure but how you can convert from square meter to square feet, how you can calculate your project or space even if you have so many irregular shape in the location.


We will also spend an entire section focused solely on practicals. You will see how epoxy installation of different designs are done step by step.Where you will also have privilege to show me your own work.


Finally, you will have an opportunity to take different Installation quiz to help you determine if you remember what you have learnt.

Let's Dive- in, Are You Ready!!!



Who this course is for:

  • This in-depth course is appropriate for any level of 3D epoxy interior design knowledge This course is for anyone who wants in-depth information on the main epoxy installations designs used today and how to mix and install those styles with confidence. This course could also be a great choice for anyone who is new to the epoxy design field and would like more in depth information. Both male and female with no previous skills,no special educational certification can take this course. This course is also for those who want to try new ways to impress themselves and their friends and family.

Report abuse