Udemy
    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
Subscribe
Turn what you know into an opportunity and reach millions around the world.
Learn More
Your cart is empty.
Keep shopping
3 storey building design in Etabs and SAFE beginning to end
Rating: 4.6 out of 5(23 ratings)
145 students

3 storey building design in Etabs and SAFE beginning to end

"Mastering 3-Storey Building Design from Start to Finish with ETABS and SAFE"
Created byELVIS INNOCENT AGBEDE
Last updated 5/2025
English

What you'll learn

  • Students will learn how to properly design a real life 3 story building from scratch to finish
  • Students will learn how to properly arrange reinforced concrete column in architectural plan
  • Students will learn how to properly arrange Reinforced concrete beam in architectural plan
  • Students will learn how to use different building code to design a real life 3 story building
  • Students will learn how to Model a real life 3 story building in Etabs
  • Students will learn how to define and apply loads like dead load, live load, earthquake loads & wind load on the building
  • Students will learn how to properly analyze the building and interpret the results from the analysis
  • Students will learn how to properly interpret the result from the design of the building
  • Students will learn how to detail the reinforcement gotten from the Design of the building.

Course content

24 sections • 97 lectures • 10h 44m total length

  • Column Placement in building plan7:45

    At the end of this lesson you should be able to place columns in the building plan.

  • Column Placement in building plan part 215:15

    At the end of this lesson, we will fully understand how to place the columns in the building plan.

  • Beam Placement in building plan10:14

    At end of this lesson you will lean how to place beams in the building plan

  • Drawing the Building final Beam and Column layout in Autocad7:10

    At the end of this video you are going to learn how to draw the final beam column layout in Autocad.

Requirements

  • Students should have some basic knowledge in Structural analysis and Reinforced concrete Design
  • Students should have Etabs Software. Any version is ok to follow while i am teaching
  • Students may consider getting Autocad Software. I will send you the Autocad Building plan
  • Students should have a Laptop
  • Students should be willing to ask me any question if they don't understand any part in this course

Description

This course, "3 Storey Building Design in Etabs and SAFE beginning to end," will guide you through all the steps that you need to know in order to properly model, analyze, and design a reinforced concrete building.

This course will lay the foundation for you to become a good structural engineer. I have taken my time to walk you through all the steps.

You need to know that there is a Gap between what you learn in school and what is done on a construction site. This is why after you Bachelor's and Master's, you try to enroll in one or two internship programs or buy courses online; so that you can learn from experienced Engineers who are already working in the construction world.

This course will walk you through:

1. Getting the Building plan from Autocad.

2. Deciding the Column and Beam positioning.

3. Modelling the Building in Etabs.

4. Modelling the Staircase.

5. Defining the Concrete Properties and Rebar Properties

6. Defining the Load Patterns (Dead load, Super Dead load, Live load, Roof live load, Earthquake load in x and y directions, wind load in x and y directions, then finally the earthquake due to drift.

7. Applying the Various loads (Super dead load, Live loads, Earthquake Loads, and Wind Loads) to the building.

8. Analyzing the Effects of these loads on the building.

9. Various Structural Vertical and Horizontal Irregularities checks that need to be done so that the building passes those checks.

10. Designing the Building.

11. Redesigning the failed members in the building.

12. Detailing of the Beams using Etabs CSI Detailing.

13. Detailing of the Columns using Etabs CSI Detailing.

14. Analysis and design of the Slab in CSI SAFE.

15. Detailing of the Slab in CSI SAFE.

16. Analysis and Design of the Staircase in Microsoft Excel.

17. Modelling the foundation (Mat Foundation) in CSI SAFE.

18. Analysis of the foundation (Mat Foundation) in CSI SAFE.

19. Designing the Foundation (Mat Foundation) In CSI SAFE.

Using the ACI and ASCE Building Code.

The Code doesn't make much difference. The knowledge of the building analysis and design will make the difference. You just follow your building code guide with the knowledge and understanding you have already gained from this course.

You will be confident enough to design a real life building by the time i walk you through all these steps.

See you soon!




Who this course is for:

  • Civil engineering Students who want to learn how to design a Reinforced concrete building
  • Students who want to learn how to design a Reinforced concrete building using Etabs Software
  • Civil Engineering Students who want to know how Professional Engineers design real Life Buildings
  • Students who recently graduated from University but have no experience designing real life Buildings
  • Students who are still in University but want to learn how to design Real life Building with Etabs
  • Students who don't understand how to Design a building and want to learn
  • Students who are finding a good course on how to use Etabs to design a real life Building
  • Engineers who want to increase their skills on how to design a building with Etabs
  • Students who want to add more value to their building design skills
  • Students who just want to learn how to design a building

Report abuse