Udemy
    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
Subscribe
Turn what you know into an opportunity and reach millions around the world.
Learn More
Your cart is empty.
Keep shopping
CCNP Enterprise ( ENARSI + ENCOR ) Configuration Labs
Rating: 4.2 out of 5(328 ratings)
7,025 students

CCNP Enterprise ( ENARSI + ENCOR ) Configuration Labs

Great configuration exercises to get hands on experience on Cisco routers & switches ! (Packet Tracer and GNS3 Labs)
Created byNetworkel Inc.
Last updated 10/2025
English
English [Auto],

What you'll learn

  • Get hands on experience for Cisco routers and switches
  • Learn Cisco IOS tricks
  • Learn problem solving (troubleshooting) techniques for Cisco routers and switches
  • Get ready for lab questions in CCNA and CCNP exams

Course content

2 sections • 17 lectures • 3h 9m total length

  • Advanced EIGRP Configuration14:50

    Configure advanced EIGRP with as 50, disable auto summarization, summarize 0.0.0.0 to 7.0.0.0 as one route, advertise 10.1.2.0/24, and enable load balancing via variance.

  • Basic OSPF Configuration18:04

    Configure basic OSPF in a multi-area lab, defining router IDs, advertising networks and interfaces, and redistributing static routes with controlled metrics while verifying neighbors and summarizing loopback prefixes.

  • Advanced OSPF Configuration26:00

    Advance ospf configuration by redistributing static routes as type e1 and enabling passive interfaces. Apply clear text authentication across area zero and area 23, with stub and a virtual link.

  • Basic Redistribution Configuration14:37

    Configure ip and ospf on routers, enable mutual redistribution between ospf and igp with no auto summary, and implement a distribute-list for odd loopbacks and a route-map for /24 routes.

  • Advanced Redistribution Configuration16:03

    Learn advanced redistribution configuration between OSPF and GAAP using route maps and access lists, setting metrics, and avoiding summarization across routers.

  • Policy Based Routing Configuration6:43

    Configure policy based routing with access lists and route maps to steer specific hosts and telnet/http traffic to chosen ISPs, while other traffic follows the alternate path.

  • BGP Neighbor Configuration11:36

    Activate IGP to enable BGP connectivity, then configure BGP neighbors using loopback addresses for IBGP and EBGP, apply multi-hop and update-source loopback, and verify adjacency.

  • Configuring BGP Attributes7:51

    Learn to configure BGP attributes to influence best path decisions, using local preference, route maps, and access lists to steer traffic for specific networks.

  • Multi Layer Switching Configuration6:43

    Enable routing on a multilayer switch, create interfaces with IP addresses, and configure a default gateway on the switch to enable PC communication across VLANs. Validate with cross-PC pings.

  • Spanning Tree Configuration8:55

    Configure spanning tree with rapid pvst to set the root bridge and adjust switch priorities, then force a switch to be the root bridge and verify using show spanning-tree.

  • Layer-3 Etherchannel Configuration7:15

    Configure a layer 3 etherchannel between two switches by creating a port channel, applying active and passive channel group modes, assigning IPs, and verifying with show commands.

  • HSRP Configuration8:35

    Configure HSRP on router interfaces, assign IP addresses, set the PC gateway to the HSRP virtual IP, and configure standby priority and preemption to designate the active router.

  • DHCP Snooping Configuration4:41

    Enable ip dhcp snooping globally, enable the ip dhcp snooping option, designate trusted and untrusted ports, configure trunk and access ports, and set a 10-packet rate limit.

  • Security and STP Configurations For Access Ports4:44

    Configure port security on access ports with a maximum of four MAC addresses and violation shutdown; set broadcast storm control to 10; enable spanning-tree portfast on access ports.

  • eBGP Configuration12:01

    Learn to configure eBGP between customer and ISP, assign IPs to gig zero zero and gig zero one interfaces, advertise prefixes, and verify with show ip bgp commands.

Requirements

  • Preparing for ICND1, ICND2 or CCNA or CCNP Route - Switch - TSHOOT exams
  • You should download Cisco Packet Tracer and GNS3

Description

"CCNP Enterprise ( ENARSI + ENCOR ) Configuration Labs" course includes the most important configuration examples that you can face on CCNP Enterprise Exams and in the real life too ! You will learn all configurations that you need to pass the CCNP exams with our professional questions. Get this awesome practical training consists of 14 lectures and pass all Cisco CCNP certification exams ! 

Make sure you are ready to pass the CCNP exam! Prepare practically for Cisco CCNP certification which are the most in-demand networking certifications in the world today! This course tests your knowledge of  CCNP topics with practical, hands on labs.

By the help of this course you will ;


  • Configure Cisco routers and switches easily !

  • Verify the configurations easily !

  • Troubleshoot the problems easily !

  • Practice Step By Step  !

  • Learn the timesaving configuration tricks !

Please check the curriculum for all the topics ( Take a look to the description of the each lecture for detailed topics that are being taught in the lesson )

Now, just download Cisco Packet Tracer & GNS3 software and relax ! You will learn everything from ZERO and after the course you will be a configuration HERO ! Do not forget theory is just the start, practice is EVERYTHING !

Who this course is for:

  • Anyone who wants to learn how to configure Cisco routers and switches
  • Anyone who wants to prepare Cisco CCNA and CCNP Exams

Report abuse