Buying for a Team? Gift This Course
Wishlisted Wishlist

Please confirm that you want to add Cisco CCNA & NEW CCENT / ICND1 (100-105) Labs & More! to your Wishlist.

Add to Wishlist

Cisco CCNA & NEW CCENT / ICND1 (100-105) Labs & More!

These Labs will prepare the student to practice and pass the simulations part of Cisco's new CCENT o ICND1 certification
4.7 (350 ratings)
Instead of using a simple lifetime average, Udemy calculates a course's star rating by considering a number of different factors such as the number of ratings, the age of ratings, and the likelihood of fraudulent ratings.
6,968 students enrolled
Created by Lazaro Diaz
Last updated 3/2016
$15 $85 82% off
30-Day Money-Back Guarantee
  • 10 hours on-demand video
  • Full lifetime access
  • Access on mobile and TV
  • Certificate of Completion
Have a coupon?

This CCNA R/S labs course which was originally for the old (200-120) & now for the NEW CCENT (100-105) Labs course is the most complete practice labs course for Cisco's old (200-120) & new certification exams.

Although this course was originally made for the old 200-120 certification, it is still relevant for the NEW CCENT / ICND1 (100-105) certification exam as well.

The old CCNA 200-120 is still about 70-80% relevant in the New CCNA 200-125 certification exam. And that is the reason that this LABS course was renamed to reflect that.

The course not only gets the student prepared for the new CCENT simulations, but gives the student more practice labs than what is covered in the certification exam.

This course is over 10+ hours long and it is a complete Hands-On lab course.

DISCLAIMER:     Please note that the simulators/emulators used in this course are not part of the course. It is the students responsibility to have these to practice with. The Cisco Packet Tracer and/or VIRAL (Virtual Internet Routing Lab) are Cisco proprietary software and can only be obtained through Cisco. It is up to each student to obtain the simulator/emulator of their choice to study along with this course.

In this course we will cover all the labs required to prepare you to practice and make sure you are prepared to tackle the simulation part of the CCENT certification exam.

Be aware that the for Cisco's new CCENT exam, the practice of simulations is extremely important and crucial to pass the certification. Therefore, this course will be prepared the student to be able to configure routers and switches by the time they complete this course.

This course is designed for the student to follow along with me as I explain the labs and the configurations.

My “Cisco CCNA for the 200-120 & now CCENT Labs" course is the gateway your success!

This course will enable you to overcome the barriers of the simulation part of the exam and give you the confidence needed to pass.

Remember that Cisco's new CCENT (100-105) certification exam is timed!

This course will make sure you can breeze through the configurations and simulations so you can have time to spare for other parts of the exam.

Also, please keep in mind, that when taking your cert, more than likely, you will have one or more simulations that have several parts to it...meaning, one question can be comprised of 2 or more parts, and all parts MUST be answered in order for you to get credit for that question.

Not answering one or more parts to any question will result in failing that question!!!

We definitely can't have that!

The difference between passing and failing may be just 1 point!

This is precisely why it is extremely important that you look at each question carefully and answer ALL parts of that question. Doing this will guarantee your success...and that's precisely why I am make sure you have the tools to succeed!

As with all my courses, I prepare them carefully and specifically to ensure that you can pass Cisco's new CCENT (100-105) certification exam and join the IT and/or Networking professions with this most important cert.

Welcome to the CLUB!

~ Laz ;)


Who is the target audience?
  • Anyone that wants to prepare and pass Cisco's new CCENT certification exam.
  • Students who want to be proficient in configuring routers & switches.
  • Students who want a hands-on experience in practising before taking of Cisco's Cisco's CCENT certification exams.
Students Who Viewed This Course Also Viewed
What Will I Learn?
This course will prepare the student for the CCENT and/or Isimulations of the CND1 (100-105) part of the certification exam.
Students will be able to configure routers and switches to prepare for the CCENT certification exam.
Students can use this Labs course as a supplement to practice for the simulation part of Cisco's new ICND1 (100-105)
This course is a hands-on practice Labs course to help the student prepare for real world scenarios.
View Curriculum
  • Students will need to have a basic understanding of Networking and the terminology.
  • Students taking this course need to have a passion for Networking, be dedicated to their studies and a motivation to succeed!
  • The Cisco Packet Tracer or a similar simulator or emulator.
Curriculum For This Course
Expand All 55 Lectures Collapse All 55 Lectures 10:00:35
Introduction to the Cisco CCNA Labs
1 Lecture 01:50

In this lecture you will learn what to expect out of this course.

Preview 01:50
Static Default & RIP configurations on Routers
6 Lectures 01:05:08

This lecture will explain the labs we will be configuring; which are; Basic Administration, Default Routes, Static Routes and RIPv2.

Section 2 Intro---ADD

This lecture will show how to configure the administrative tasks of a Cisco router, how to configure IP's on the interfaces and then finishing with verification of connectivity.

Learn the basic connectivity and configurations of a Cisco router

In this lecture you will learn how to configure and understand Static Default Routes

Using Default Static Routes

In this lecture you will learn how to configure static routes and understand the concepts of using static routes

Using Static Routes to route packets accross the network

In this lecture you will learn how to configure the routing protocol RIPv2

Using the Dynamic Routing Protocol, RIPv2, to route packets accross the network

This section simply summates what topics where covered in this section

Summary of Section
Using the Routing Protocol EIGRP
4 Lectures 47:29

In this lecture I will explain the labs we will be doing for EIGRP.

Introduction to the EIGRP section

In this lecture you will learn how to configure EIGRP and gain an understanding of the topology table and its contents.

Basic configuration of the EIGRP routing protcol

Here you will learn to manipulate path selection by changing the defaul bandwidths on the interfaces.

Manipulating the bandwidth on EIGRP to control path selection

This lecture summates the topics covered

Summary of Section
Using the Link State Routing Protocol OSPF
5 Lectures 54:59

This lecture will explain the labs we will be using to configure OSPF.

Introduction to the OSPF Lab

In this lecture you learn how to calculate Wildcard Masks, in two very easy methods.

How to calculate Wildcard Mask

In this lecture you will configure OSPF and learn how to use some show commands to acquire specific information

Configuring OSPF in a Point-to-Point topology

In this lecture you will configure OSPF in a Multi-Access environment and gain the understanding of the DR/BDR election process.

Configuring OSPF in a Multi-Access topology

This lecture summates the topics covered

Summary of Section
Configure switches with required topics
8 Lectures 01:27:33

This lecture will explain what we will be covering in the switching labs

Introduction to Switching Labs

In this lecture you will learn the basic configurations such as, passwords, usernames, SSH, DNS and more.

Basic Administrative configurations on the switch

In this lecture you will learn to create, name and assign vlans

Preview 07:16

In this lecture you will learn how to configure trunk ports on a LAYER 2 switch.

Configuring Trunk ports on a layer2 switch

In this lecture you will learn how to work with the STP protocol.

Configuring and Manipulating Spanning-Tree Protocol

In this lecture you will learn how secure your switch ports, so rogue users can connect to those ports and compromise your network.

Configuring Port Security on the switch

In this lecture you will learn how to configure inter-vlan connectivity in a Cisco router.

Configuring Inter-vlans on a Cisco Router

This lecture summates the topics in section.

Summary of Section
Create Standard and Extended Access-list
4 Lectures 28:08

This lecture will explain what labs you will be configuring.

Introduction to configuring Access-list on a Cisco routers

In this lecture you will configure standard access-list and apply them on an interface and your telnet lines

Configuring Standard ACL's

In this lecture you will configure extended access-lists that will allow and deny certain port numbers, too and from a particular host.

Configuring Extended ACL

This section summates the topics in this section

Summary of Section
Learn about Network Address Translations
4 Lectures 21:13

This lecture will explain what labs we will be creating and configuring to use NAT.

Introdcution to the NAT Protocol

In this lecture you will learn how to configure NAT Overload and learn the pitfalls you may encounter

Configuring NAT Overload on your Cisco Router

In this lecture you will see the configuration of Dynamic NAT and its Pitfalls.

Configuring Dynamic NAT

This section summates the topics in this section

Summary of Section
Covering HSRP and EtherChannel Configurations
4 Lectures 41:51

In this lecture I will explain the labs you will configure in the section

Introduction to HSRP and EtherChannel Labs

In this lecture you will learn how to configure HSRP.

Configuring the HSRP redundancy protocol

In this lecture you will configure EtherChannel and be able to compare it to a non-EtherChannel network

EtherChannel Configuration on Cisco Switches

This section summates the topics in this section

Summary of Section
All about WAN protocols: Frame-relay and PPP
4 Lectures 35:10

In this lecture I will explain the Labs you will be configuring in this section

Introduction to WAN Protocols

In this lecture you will learn how to configure frame-relay and understand its concepts

Frame-Relay Configuration on Cisco Routers

In this lecture you will learn how to configure PPP on Cisco Routers and be able to troubleshoot why is not working.

PPP Configuration on Cisco Routers

This lecture summates the topics in this section

Summary of Section
The DHCP and IPv6 addressing protocols
8 Lectures 01:19:44

This lecture will explain what to expect in this section

Introdcution to DHCP and IPv6 Objectives

In this lecture you will learn how to configure DHCP for various networks through vlans

Configuring DHCP for IPv4 on Cisco routers

In this lecture you will learn how to configure IPv6 addresses on a Cisco router and very connectivity.

Configuring IPv6 Addresses on Cisco Routers

In this lecture you will learn how to configure and verify RIPng

Configuring RIPng on Cisco Routers

In this lecture you learn how to configure EIGRP for IPv6 on Cisco Routers and verify its working

Configuring EIGRP for IPv6 on Cisco Routers

In this lecture you will learn how to configure OSPFv3 and verify that is working as well as default static IPv6 route.

Configuring OSPFv3 and IPv6 Default Routes

In this lecture you will learn how to configure Auto-configuration and its purpose.

Configuring Auto-Configuration using the EUI-64 on Cisco routers

This lecture summates the topics on this section

Summary of Section
3 More Sections
About the Instructor
4.4 Average rating
2,495 Reviews
22,454 Students
15 Courses
Network Engineer, Cisco & Microsoft Instructor

2017 will be our year to achieve our many goals! ...yes, I include myself here as well.

If you are determined, ambitious and hungry for a new beginning...then 2017 should be your year!  

...and how better to start or end the year than to get your Cisco Certification!

Whether you are interested in the CCNA R/S, the CCENT or even the CCNP Route or just want to understand the key topics of these certification exams, taking one or ALL of my courses, will get you a lot closer to that goal.

But, don't take my word for it...please take a look at the FREE previews (they are available in all my courses) and see for yourself.

As for me, 2017 will be the year of putting out new courses for different types of IT certifications among other things.

These will include, not just Cisco courses, but also CompTIA & Microsoft courses as well.

I also hope to complete my second book based on ALL the Routing Protocols among other projects that I want to complete in 2017.

So, yes, my schedule will be quite full and I love it!

What you wanted to know about me:

If you are tired of the same old methods of learning and want someone that is pretty much unconventional, but at the same time will provide you with an enjoyable learning experience in layman's terms...then please preview my courses and you will discover that I am your guy.

I am a Network Engineer with over 15+ years in the field and in the teaching industry. I hold the following certifications: CCNA, CCNA Security, CCNA Voice, Security+, Network+, A+, MCP, MCTS & MOS and since I passed the first of two test for the CCIE, I hope to complete the second half in 2017! 

My teaching experience stems from teaching at institutions like Palm Beach Community College, New Horizons, Florida Career College (now Anthem College) and The Academy of South Florida, not to mention teaching at my own training facility in Miami, Florida and now being if several e-Learning platforms world-wide.

Having been in all sides of the spectrum; as a student, a teacher/trainer, and in the field, I believe this uniquely qualifies me to understand the student, and what they have been exposed to as opposed to what they really want to accomplish. These two are sometimes extremely conflicting and frustrating. That is why I teach in the manner I do and can relate to the student's rejection of the Status Quo.

I have taught corporate employees at MetroPCS (now T-Mobil) and have also taught IT professionals of companies like The Florida Marlins, Hospital personnel & Attorney's firms, among others, to guide them in acquiring their CCNA certification and/or their Microsoft certifications; like the MOS (Microsoft Office Specialist). YES!...I am also an applications instructor and also teach Word, Excel, PowerPoint and Access.

I teach in an unconventional way that allows for students to understand the subject matter and can therefore, not only prepare them for a Cisco and/or Microsoft certification exam, but apply my methods in the real world. I strive to give the student a greater opportunity to compete in the current job markets. Do I go above and beyond what is needed for a certification?...YES, I do!...because it's not only about getting a certification, it's also about making sure the student is prepared for a job interview and/or maintaining their current job by enhancing their skills. This is where I step in and make sure that the student is prepared for whatever they need and make them an asset to their employer. Everyone has different requirements and I make sure, or at least I try, to provide information for most scenarios.

My classes and/or courses are very simple and that's how I like to teach. I truly believe in "KISS",,,NO, I don't want to kiss you, what this means "keep it simple stupid" - If things are kept simple, easy and explained in a way that the student can grasp quickly and retain the information...then I have achieved my goal!

For those that do not know me yet, you may not be used to my style of teaching, but you will soon get accustomed to it :)... I'm very laid back, I try to make learning fun and I teach in layman's physics jargon or mumbo jumbo in my teachings. My courses are very interactive and extremely dynamic! will not find my lectures monotone or boring, because falling asleep, for lack of excitement, is just NOT an option. Just take a look for yourself at my video previews, which I always provide on ALL my courses, so you can determine if I'm the right guy to help you get your industry specific certifications. ;)

I certainly hope that after a careful review of my credentials & testimonials (you can Google it you know!), I'm the Cisco & Microsoft Instructor you're looking for!


Network Engineer, Cisco & Microsoft Instructor
Motivational Evangelist

- and -

Author of: "The Only IP Book You Will Ever Need!" now on AMAZON

Report Abuse