Find online courses made by experts from around the world.
Take your courses with you and learn anywhere, anytime.
Learn and practice real-world skills and achieve your goals.
Home I/O is an educational software which simulates a smart house and allows you to learn and improve your skills in home automation, heat transfer, energy efficiency and much more.
It can be as simple as controlling any of the available devices, like a motorized garage door or a thermostat, or as sophisticated as setting up a network to enable centralized control of the entire home.
What this course includes?
What Home I/O Consist?174 Controllable Devices
More than 400 I/O points. Interact with all the lighting, heating, motorized, intrusion security and domestic safety devices in one of the three available Modes: Wired, Console and External.Home Automation Console
Practice centralized control of the house by creating specific scenarios in the Console Mode for different situations like Vacations, Security & Monitoring or Energy Management.Connect External Technologies
Use Connect I/O to get unlimited possibilities by accessing and controlling Home I/O through external technologies, like PLC, microcontrollers, etc.Heat Transfer
A simplified model was created to enable a real time representation of how heat transfers between different bodies. It's advised to use the faster than real time mode to observe these phenomena since they are typically slow. The existing coloured Minimap allows you to see how temperature changes inside every room.Analyse And Learn About Energy Efficiency
Alter all the parameters of the house and learn about energy efficiency by observing and analysing the consumption of energy or cost per hour, day, week and month.
Not for you? No problem.
30 day money back guarantee.
Learn on the go.
Desktop, iOS and Android.
Certificate of completion.
|Section 1: Introduction to Home I/O|
Understanding the Environment & Smart House BuildingPreview
Download HOME I/O & CONNECT I/O Software
Types of Sensors & Actuators- Analog & Digital
|Section 2: Automation of Entrance Gate via Connect I/O|
Open the Gate using Infrared Sensor 1
Latching the Open Operation of Gate
Latching the Open/Close Operation of the GatePreview
|Section 3: Exercise for Practice- Automating the Gate via Connect I/O|
Time Conditional Opening of Gate
Count Condition in Closing the Gate
How to read Real Time Values in HOME I/O
Real Time based Opening of GatePreview
|Section 4: Automation of Garden & Pool Light via Connect I/O|
Automatic Turn ON/OFF Garden Light using Brightness SensorPreview
Analog Automatic ON/OFF of Garden Light using Brightness Sensor
|Section 5: Exercise for Practice: Automation of Garden & Pool Light via Connect I/O|
Real Time Control of Garden & Pool Light
|Section 6: Automation of Garage via Connect I/O|
Latching & Unlatching the Door by Infrared Sensors
Time Conditional Unlatching of Door
Lights ON/OFF using Motion Detector
Lights ON/OFF using Real Time & Brightness Sensor
|Section 7: Automation of Entrance Door by Connect I/O|
Turn ON the Entrance Light using Motion Sensor
Adding Security Alert in Entrance Door
|Section 8: Control of Lights, Roller Shades, Security Alert in Block E|
Understanding Security Lock Device
How to raise an Alarm for Unauthorized Entry?
Controlling Roller Shades
Temperature Control using Thermostat & Heater
|Section 9: Energy Saving in Temperature Controller|
Siren Alert in "Door Open" State in Temperature Controlled Room
|Section 10: Controlling Room Section A in Home I/O|
Automatic Control of Roller Shades at different Time interval
Smoke Alert in the Room
|Section 11: Course wrap-up Guide|
Home I/O User Guide
Associated Memory Addresses
Engine I/O - Getting Started
|Section 12: Home IO Interface with DAQ Card Experiments|
Controlling Home IO by External Switches via DAQ Card
Controlling Home IO by External Potentiometer via DAQ Card
Controlling Home IO by PLC- Allen Bradley Micrologix 1400
|Section 13: Home I/O Activities|
Activity 1- Latching the Open & Close Operation of the Gate
Activity 2- Analog Control Operation in Home IO
Activity 3 - Intruder Alert- Raising an Alarm for Unauthorized Entry
Activity 4 - Controlling Home IO using External Devices
Activity 5- Analog Control of Home IO using DAQ
Activity 6 - PLC Controlled of Home IO using DAQ Card
I am working as Associate Director, NFI- INDUSTRIAL AUTOMATION TRAINING ACADEMY, INDIA. We provide hand on training on Industrial Control, PLC, HMI, AC Drives - VFD & Servo, Hydraulics & Pneumatics.